Page 2 - ENGLISH; Introduction; READ THIS BEFORE OPERATING YOUR UNIT; : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,; FOR YOUR SAFETY; CANADA; Do not let foreign objects in the set.; Caution; CAUTION
2 ENGLISH Introduction READ THIS BEFORE OPERATING YOUR UNIT : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MO...
Page 3 - SAFETY INSTRUCTIONS
ENGLISH 3 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instru...
Page 4 - CONTENTS
4 CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT .................................................................................... 2 SAFETY INSTRUCTIONS .......................................................................................................................... 3 Syste...
Page 5 - System Connections; MIN; outdoor FM antenna may be used to further improve the reception.
5 System Connections B A MIN MAX MIN MAX B A PLAY REC PLAY REC PLAY VIDEO 1 VIDEO 2 TAPE MON. VIDEO 1 CD AUX VIDEO 2 MONITOR VIDEO 1 VIDEO OUT VIDEO IN • Do not plug the AC input cord into the wall AC outlet until all connections are completed.• Be sure to observe the color coding when connecting au...
Page 7 - Front Panel Controls
7 Front Panel Controls REMOTESENSOR MASTER VOLUME TONE DIRECT ON/STANDBY MAIN POWER STANDBY ON/ OFF TUNING/PRESET ADJUST PHONES CHANNEL SELECTOR VIDEO L - AUDIO - R VIDEO 3 BAND FM MODE T/P MODE TONE MODE SPEAKER MODE DYNAMIC RANGE MEMO/ENTER CINEMA EQ ON/OFF SPEAKER INPUT SELECTOR SURROUND MODE DSP...
Page 8 - Remote Controls
ENGLISH 8 Remote Controls POWER DISPLAY SLEEP VIDEO1 1 2 3 VIDEO2 4 5 6 VIDEO3 7 8 9 CD T.TONE 0 P.SCAN TUNER DSP MODE D.TIME ADJUST AUX MUTE T.MON CH. LEVEL AUTO CH. SEL MASTER VOLUME REMOTE CONTROL UNIT RM-105
Page 9 - LOADING BATTERIES; • Use the remote control unit within a range of about 7
ENGLISH 9 LOADING BATTERIES REMOTE CONTROL OPERATION RANGE 1 2 • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degreesaiming at the remote sensor. • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries(Ni...
Page 10 - LISTENING TO A PROGRAM SOURCE; Operations; Before operation; TAPE MONITOR function; or
ENGLISH 10 LISTENING TO A PROGRAM SOURCE Operations Before operation Select the desired input source. 3 • Enter the standby mode. • The STANDBY indicator lights up. This means that the receiver is not disconnected fromthe AC mains and a small amount of current is retainedto support the memorized con...
Page 13 - SURROUND SOUND; quality and sound atmosphere in your personal Home Theater.; • The following modes apply conventional 2-channel; Surround modes
13 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Dolby Digital Dolby Digital is the multi-channel digital signal formatdeveloped by Dolby Laboratories. Discs bea...
Page 15 - ENJOYING SURROUND SOUND; MONITOR, the decoding mode can be selected.; the selected decoding mode as follows:; MUSIC, DOLBY PRO LOGIC II MATRIX and DOLBY PRO LOGIC II CUSTOM; • Each time the AUTO button is pressed, the decoding; IN-PCM : The PCM signal processing is performed
15 ENJOYING SURROUND SOUND Depending on the input digital signalformat, select the desired decoding mode. 1 • Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeati...
Page 16 - When canceling the surround mode for stereo operation.
ENGLISH • If the parameter display disappears, start from the step 3 again. Repeat the above steps 3 and 4 to adjustother parameters. 5 Note: • In the Dolby Pro Logic II Customer mode, you cannot set both of the 7 kHz Low Pass Filter andShelf Filter to ON simultaneously. If so, the filter set previo...
Page 18 - Front Left
ENGLISH 18 Enter the test tone mode. 14 • Only when it is in available surround modes except stereo mode, the volume level of each channel canbe adjusted easily with the test tone function. Note: When the 6 CH DIRECT is selected as an input source, the test tone function does notwork. At each channe...
Page 19 - Rear delay time : 0 ms; Downmixing into 2 front channels
ENGLISH 19 In Dolby Digital, Dolby Pro Logic II orDolby Pro Logic mode, adjusting delaytimes of the speakers • The delay time will be displayed for 5 seconds.• The corresponding delay time is displayed. The center delay time can be adjusted in the Dolby Digitalmode only. • In case of Dolby Digital, ...
Page 20 - LISTENING TO RADIO BROADCASTS; Presetting radio stations
ENGLISH 20 LISTENING TO RADIO BROADCASTS Presetting radio stations Auto tuning • Each time this button is pressed, the mode changes as follows; Tuning mode : “PRESET” goes off.Preset mode : “PRESET” lights up. • The tuner will now search until a station of sufficient strength has been found. The dis...
Page 21 - MEMORY BACKUP FUNCTION; Scanning preset stations in sequence
ENGLISH 21 Repeat the above steps 1 to 3 to memorizeother stations. 4 After selecting the tuner as an inputsource, select the preset tuning mode. 1 Listening to FM stereo broadcasts • When using the NUMERIC buttons on the remote control. Examples) For “3” : For “15” : For “30” : • The station has no...
Page 22 - RECORDING; Recording with TAPE MONITOR; input can be heard but cannot be recorded.
ENGLISH 22 RECORDING Start recording on the TAPE MONITOR. 2 Select the desired input as a recordingsource except for TAPE MONITOR. 1 Recording with TAPE MONITOR Select VIDEO 2 or VIDEO 3 as a recordingsource. 1 Dubbing from video components ontoVIDEO 1 Select VIDEO 2 as a video recording source. 1 D...
Page 23 - OTHER FUNCTIONS
ENGLISH 23 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time beforeautomatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time chan...
Page 24 - Troubleshooting Guide; PROBLEM
24 Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the rearspeakers No sound from the centerspeaker Stations cannot be received Preset stations cannot bereceived Poor FM reception Continuous hissing noiseduring FM reception,especially when a stereobroadcast is rec...
Page 25 - Specifications
25 AMPLIFIER SECTION • Power output, stereo mode, 6 Ω , THD 0.7%, 40 Hz~20 kHz ................................................................................. 2 100 W • Total harmonic distortion, 6 Ω , 100 W, 1 kHz ......................................................................................
