Sherwood SR 7206 - Manual
Sherwood SR 7206 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – replacement of parts.; result in serious injury or death.
- Page 5 – ) Checking alignment of Demand Lever; sealing and require replacement of the part.
- Page 7 – Reassembly; Install a new Seat into the Poppet.
- Page 8 – appropriate emergency response to avoid serious injury or death.
- Page 9 – Final Check; Step 25 or replace Demand Lever if necessary.; serious injury or death.
- Page 10 – WARRANTY INFORMATION; PETER SKOP INDUSTRIES; CRAMER DECKER INDUSTRIES
- Page 11 – WARNING
SERVICE INSTRUCTIONS
DUAL OCTO
SECOND STAGE REGULATOR
SR 7206
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.sherwoodscuba.com INTRODUCTION The instructions set forth in this document are intended to guide the experienced scuba equipment repair technician through the standard service procedure for the Dual Octo second stage regulator. It is assumed that the technician possesses basic scuba equipment re...
www.sherwoodscuba.com 8. Before further disassembly check the alignment of the Demand Lever (7) with regard to the Housing (10). The surface of the Demand Lever that contacts the Diaphragm should be parallel to the Housing within 1/16 inches. Place a straight edge across the Housing to check the ali...
www.sherwoodscuba.com Reassembly 15. Install the Exhaust Valves using the same gentle stretching technique used for removal. 16. Install each Exhaust Valve Cover using only your fingers to tighten. Use of tools may damage the Exhaust Valve Cover. 17. If the demand valve subassembly was cleaned as a ...
