Shark IZ363HT - Manuals - manualsarea.com

Page 2 - QUICK; WARNING; FOR HOUSEHOLD USE ONLY • WHEN USING AN ELECTRICAL APPLIANCE, BASIC; SAVE THESE INSTRUCTIONS; BATTERY PACK

s h a r k c l e a n . c o m s h a r k c l e a n . c o m QUICK START GUIDE THE FLOOR NOZZLE, WAND, AND HANDHELD VACUUM CONTAIN ELECTRICAL CONNECTIONS:1. This vacuum consists of a motorized nozzle, wand, and handheld vacuum. These components contain electrical connections, electrical wiring, and movin...

Page 3 - ASSEMBLY; RECYCLING THE LI - ION BAT TERY; Charging

s h a r k c l e a n . c o m s h a r k c l e a n . c o m ASSEMBLY 1. Insert Wand into Floor Nozzle . 2. Insert Handheld Vacuum into wand. For proper operation, ensure all components are completely connected and clicked into place. LI- ION BATTERY Prior to first use, charge completely. A full charge t...

Page 4 - CHARGING THE BATTERY; POWER SETTINGS; OFF

s h a r k c l e a n . c o m s h a r k c l e a n . c o m CHARGING THE BATTERY If your handheld vacuum’s battery is non-removable, press the Wand Release button to detach the handheld vacuum, then plug the charger into the charging port on the handheld vacuum. Plug the Li-Ion Charger into a wall outle...

Page 5 - CLEANING MODES; STOR AGE; ONBOARD STOR AGE

s h a r k c l e a n . c o m s h a r k c l e a n . c o m CLEANING MODES NOTE: All accessories are compatible with both the wand and the handheld vacuum. To clean floors, step on floor nozzle and tilt handheld vacuum back. UPRIGHT WITH STANDARD WAND Stand the vacuum upright and press the nozzle releas...

Page 6 - EMPT YING THE DUST CUP; MAINTAINING YOUR VACUUM; CLEANING THE FILTERS

s h a r k c l e a n . c o m s h a r k c l e a n . c o m PRE-MOTOR FILTER POST-MOTOR FILTER Press the wand release button to disconnect the handheld vacuum from the wand. To remove the dust cup from the handheld vacuum, press the Dust Cup Release button near the handheld vacuum nozzle. Tilt the dust ...

Page 7 - CLEANING THE POWERFINS BRUSHROLL; FLOOR NOZZLE; CHECKING FOR BLOCK AGES

s h a r k c l e a n . c o m s h a r k c l e a n . c o m 1. Turn off the vacuum. 2. Using a coin, turn locks counterclockwise to open, then lift off cover to access brushroll. 3. Clear airway of blockages. 4. Replace cover by sliding inserts into slots, then pressing down firmly on all sides before t...

Page 8 - power and remove the battery before servicing.; ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM

s h a r k c l e a n . c o m s h a r k c l e a n . c o m MAINTAINING YOUR VACUUM TROUBLESHOOTING WARNING: To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing. Vacuum is not picking up debris. No suction or light suction. Nozzle light is red. (R...

Page 10 - TECHNICAL SPECIFICATIONS; REGISTER YOUR PURCHASE; registeryourshark.com; NOTES

s h a r k c l e a n . c o m s h a r k c l e a n . c o m BATTERY REMOVAL AND DISPOSAL This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a charge, it should be removed from the vacuum and recycled. DO NOT incinerate or compost the battery. When your ...

Page 11 - PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

© 2020 SharkNinja Operating LLC. MULTIFLEX, ROCKET, and SHARK are registered trademarks of SharkNinja Operating LLC. CLEANTOUCH is a trademark of SharkNinja Operating LLC. RBRC is a trademark of Rechargeable Battery Recycling Corporation. IZ300�Series�IB�MP�Mv8 PRINTED IN CHINA PLEASE READ CAREFULLY...