Shark ZD201 - Manual
Shark ZD201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; IMPORTANT SAFETY INSTRUCTIONS; FOR HOUSEHOLD USE ONLY; SAVE THESE INSTRUCTIONS
- Page 3 – ASSEMBLY
- Page 4 – CLEANING MODES; UPRIGHT MODE; SETTINGS; INDICATOR LIGHT
- Page 5 – EMPTYING THE DUST CUP; RINSE HEPA FILTER; CLEANING AND REPLACING THE FILTERS; Foam; Follow the previous instructions for removing filters. The; HEPA Filter; should be replaced every 3 years.; REPLACING FILTERS
- Page 6 – MAINTENANCE; CHECKING FOR BLOCKAGES; CORD MAINTENANCE
- Page 7 – AVAILABLE ACCESSORIES; Upholstery Tool; TROUBLESHOOTING; filters before reinstalling them.
- Page 8 – SharkNinja; What is covered by this warranty?
- Page 9 – PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Navigator
®
Lift-Away
®
Pet
with PowerFins
®
HairPro
™
and
Self-Cleaning Brushroll
Upright Vacuum
ZD201 Series
OWNER’S GUIDE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Shark ZD201
Summary
s h a r k c l e a n . c o m s h a r k c l e a n . c o m READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM1. Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your...
s h a r k c l e a n . c o m s h a r k c l e a n . c o m ASSEMBLY ASSEMBLY 1. Place Pod onto Floor Nozzle Post. 2. Insert Wand into pod. 3. Attach the bottom Accessory Holder onto the pod. 4. Insert Handle into wand. 5. Attach Hose Clip to wand. 6. Connect Hose to back of pod. 7. Store accessories on...
s h a r k c l e a n . c o m s h a r k c l e a n . c o m NOTE: All accessories are compatible with both the wand and the handle. WHOLE-HOME CLEANING CLEANING MODES To engage Brushroll , step on floor nozzle and tilt handle back firmly. Press the Power/Surface switch to the appropriate floor setting. ...
