Shark AZ913ANZ - Manuals - manualsarea.com

Page 2 - THANK YOU

2 s h a r k c l e a n . c o m . a u TECHNICAL SPECIFICATIONS Voltage: 220-240V AC, 50-60Hz Watts: 800W TIP: You can find the model and serial numbers on the QR code label located on the back of your unit. RECORD THIS INFORMATION Model Number: ��Serial Number ��...

Page 3 - CONTENTS; Power Cord � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

3 s h a r k c l e a n . c o . n z CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Getting to Know Your Shark® Lift-Away® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly . . . . . . . . . . . . . . . . . . ...

Page 4 - WARNING; Children should be; IMPORTANT SAFETY INSTRUCTIONS; FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS

4 s h a r k c l e a n . c o m . a u WARNING REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE: WARNING: Children should be supervised to ensure that they do not play with this vacuum cleaner. GENERAL WARNINGS1. Inspect power cord and plug for any dam- age before use. DO NOT use vac...

Page 5 - READ ALL INSTRUCTIONS BEFORE USE; READ ALL INSTRUCTIONS BEFORE USE; DO NOT; ODOUR NEUTRALISER TECHNOLOGY

5 s h a r k c l e a n . c o . n z SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE 19. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard. 2...

Page 8 - ASSEMBLY

8 s h a r k c l e a n . c o m . a u ASSEMBLY 1. Place motorised Floorhead on floor and insert Wand , pressing it in until it clicks securely into place� 2. Place Pod onto wand and slide down to connect� 3. Insert Handle into wand, pressing it in until it clicks securely into place� 4. Connect Hose t...

Page 9 - For cord access, rotate upper

9 s h a r k c l e a n . c o . n z ASSEMBLY (Click) 4 POWER CORD For cord access, rotate upper hook down and remove cord� UPPER CORD HOOK 5 (Turn to Click) 7 6

Page 10 - ODOUR NEUTR ALISER; Medium; ODOUR NEUTRALISER TECHNOLOGY TIPS; Maintenance Required

10 s h a r k c l e a n . c o m . a u ODOUR NEUTRALISER TECHNOLOGY SETTINGS Flip up the handle and rotate the Odour Neutraliser Technology Dial to adjust to adjust fragrance puk intensity or to remove cartridge� ODOUR NEUTR ALISER TECHNOLOGY DIAL Insertion/Removal: Rotate the Odour Neutraliser Techno...

Page 12 - Flashing Red Lights:; HEADLIGHT INDICATOR LIGHTS; HEADLIGHTS

12 s h a r k c l e a n . c o m . a u OPERATING THE VACUUM SETTINGS NOTE: Try using Hard Floor mode for low pile area rugs� WHAT DO THE HEADLIGHT INDICATOR LIGHTS MEAN? Solid White Lights: The brushrolls are spinning and unit is working as it should� Solid Red Lights: There is a jam in the brushroll ...

Page 13 - OPERATING THE VACUUM; Wand Release; UPRIGHT

13 s h a r k c l e a n . c o . n z NOTE: All accessories are compatible with both the wand and the handle� OPERATING THE VACUUM CLEANING MODES To engage brush-rolls, step on floorhead and tilt handle back� Press the Wand Release button to detach the wand from the pod� With pod removed, press the Wan...

Page 14 - EMPTYING THE DUST CUP

14 s h a r k c l e a n . c o m . a u EMPTYING THE DUST CUP To remove Dust Cup , press release button on top of the pod� Tilt dust cup away from wand, then lift to remove� To reinstall, place bottom of dust cup into pod and then tilt until it clicks into place� To empty debris into the bin, press low...

Page 15 - CLEAN POST MOTOR FILTER EVERY YEAR; Regularly wash, dry and replace the filters; CLEANING AND REPLACING THE FILTERS; CLEAN PRE-MOTOR FILTERS EVERY

15 s h a r k c l e a n . c o . n z Filter Door Release CLEAN POST MOTOR FILTER EVERY YEAR Lie unit flat on the floor so you can see the post motor filter underneath� With the dust cup removed, press button on filter housing and pull forward� Remove post motor filter by pressing black tab until it cl...

Page 16 - MAINTENANCE; SELF CLEANING BRUSHROLL; CORD MAINTENANCE

16 s h a r k c l e a n . c o m . a u MAINTENANCE SELF CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug� This will allow the Self Cleaning brushroll to remove the hair wrap and...

Page 17 - CHECKING FOR BLOCKAGES; HOSE BLOCK AGE; FLOORHEAD HOSE BLOCKAGE

17 s h a r k c l e a n . c o . n z CHECKING FOR BLOCKAGES Detach hose from vacuum pod, and check hose and opening on back of pod for blockages� Detach wand from floorhead and handle, and check both ends for blockages� Detach wand from floorhead, tilt floorhead neck back, and check opening for blocka...

Page 18 - AVAILABLE ACCESSORIES

18 s h a r k c l e a n . c o m . a u AVAILABLE ACCESSORIES D G I E C B A Crevice Tool This slender tool offers extended reach to access corners, kick boards and skirting boards, tight spaces, and ceilings� B Upholstery Tool Picks up hair, dust, and large debris from mattresses, sofas, curtains, lamp...

Page 19 - TROUBLESHOOTING; Power cord caught in brushroll or floorhead.

19 s h a r k c l e a n . c o . n z TROUBLESHOOTING Power cord caught in brushroll or floorhead. • To minimise the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or floorhead. • Insp...

Page 21 - NOTES

Page 24 - ODOUR NEUTRALISER TECHNOLOGY SPECIFICATIONS.; Proudly distributed by; Building D, 33 Quarry Road; AUS; sharkclean�com�au

ODOUR NEUTRALISER TECHNOLOGY SPECIFICATIONS. 1. Product Name: Odour Neutraliser Technology Fragrance Puk2. Ingredients: Solid SM composite polymer C17 + fragrance SE 446676 Illustrations may differ from actual product� We are constantly striving to improve our products, therefore the specifications ...