SATO LM400E - Manuals

  : Use only the designated electrical power and voltage ●   Use the type of power source indicated on the printer. Different voltage may cause fire or electric shock.   : Connect ground wire ●   Make sure to connect the ground wire of the printer to the ground slot. Failure to do so may cause elect...

outlet, and contact your nearest dealer, service center or the store where you purchased the printer. Do not attempt to repair the printer yourself.   : Do not disassemble ●   Do not attempt to disassemble or modify the printer. Fire or electric shock may occur. For service and repair of internal pr...

  : Maintenance and cleaning ●   Disconnect the power cord from a power outlet when maintaining or cleaning the printer.                                                       Ⅶ

  Table of Contents     ●   Precautions for installation and handling……………………………..1, 2, 3 ●   Unpacking ………………………………………………………………… …...4   ●   Accessories…………………………………………………………………….5 ●   Names of parts…………………………………………………………..6, 7, 8 ●   Setting roll label……………………………………………………….9, 10, 11 ●   Setting fa...

Precautions for installation and handling Printer operation can be affected by the printer environment.   Refer to the following instructions for installation and handling of LM400e.   ▲  Select a safe location When selecting a location for installation of LM400e, consider the following topics.   Pl...

        ▲  Power supply The LM400e Series require AC110-220V.   Provide a stable source of electricity to the printer Do not share the power outlets with other appliances such as a heater and refrigerator requiring a measurable amount of power. Also, avoid using the power outlet near such appliances...

    Unpacking     Taking the LM400e from the box and removing the protective molded cover and plastic cover, it is ready for installation.     Printer Accessory 2 Accessory 1 Box Protective molded cover (bottom) Protective molded cover (top)                                                           ...

  Accessories     Make sure you have received all of the following items in this package.     If there are any accessories missing, contact your nearest dealer or the store where you purchased the printer.   Power cord           Quick Guide               Power cord ▲  Box Keep the box and cushioning...

  Names of parts   Operation panel: LCD for displaying messages, two operation keys, two-color LED for indicating printer status Side cover Ribbon take-up spindle Ribbon supply spindle Label supply spindle                               Power ON/OFF switch: Turns power ON or OFF. “I” is ON. “O” is OF...

      Label stopper Secures the roll label                     Platen roller (consumable part) Discharges the printed media Thermal head (consumable part) Prints data on the media                     Head lock lever     Fuse When the current exceeding particular level runs through the printer, a fus...

Setting roll label   1   Open the side cover.               Side cover   2 Push up the purple head lock lever in the direction of an arrow to open the thermal head.               Thermal head Head lock lever   3   Turn the slide guide in the direction of an arrow and leave the guide on the angle.   ...

Setting fan-fold label   1   Open the side cover.   Push the nylon rivet from the inside of the printer and remove the cover for fan-fold opening.         Side cover   2 Push up the purple head lock lever in the direction of an arrow to open the thermal head.             Thermal head Head lock lever...

Setting carbon ribbon Use only SATO carbon ribbons. Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or damage to the print head and may void your warranty.   1   Open the side cover.               Side cover   2 Push up the purple head lock lever in the direc...

Adjusting Pitch Sensor   1   Open the side cover.               Side cover   2 To adjust the pitch sensor position, Slide the green pitch sensor knob at the far end of the slide guide. It is located at the backmost (on the sensor frame side).         Pitch sensor Pitch sensor knob   3   Close the si...

  Turning on Power     Connect the power cord and turn on the printer.     Power supply     After installing the printer, connect the power cord as instructed below.   ▲  Power cord and power outlet As shown in this picture, included power cord has three contacts.       The socket has three contacts...

    If your power outlet has two slots, use a 3- to 2-prong adapter.                       Turning the power ON     Press the power switch to the direction of [I].                     Warning     Connect the earth lead to the ground slot. Failure to do so may cause     electric shock.   Power cord E...

  LM400e Series specifications   Model: LM408e / LM412e     Print method: Thermal transfer / Direct thermal     Print resolution:       203/305dpi 8 dots mm/12 dots mm     Media size: Max. 128mm Width (including backing liner 131mm)     Printable area: Max. 104mm width / Max. pitch 178mm     Max. pr...