Page 3 - Features of LM400e Series; Superior print performance; Operation panel and LCD display; Durability and easy handling
Features of LM400e Series The LM400e Series – the rugged industrial generation of high performance printers with high resolution capabilities. The LM400e is a user-friendly printer providing high throughput and print speed in barcode label production. ...
Page 4 - Safety Precautions; Pictograph Descriptions; Warning; Meaning of pictographs
Safety Precautions This Quick Guide contains important information for safety of the user. To insure proper use, please read these Safety Precautions before using this product. ▲ Pictograph Descriptions The following pictograph descriptions are used in this Quick Guide and on the printe...
Page 5 - : Place the printer on a surface that is flat and level
: Do not dispose the printer by fire, or expose it to heat, or put in fire. : Unplug the printer from power outlet. : Connect ground wire to ground slot. Warning : Place the printer on a surface that is flat and level ● Do not leave the printer on unstable surfaces. If the prin...
Page 6 - : In case of drop or damage
: Use only the designated electrical power and voltage ● Use the type of power source indicated on the printer. Different voltage may cause fire or electric shock. : Connect ground wire ● Make sure to connect the ground wire of the printer to the ground slot. Failure to do so may cause elect...
Page 7 - : Do not disassemble; Caution; : Do not use in locations with high humidity
outlet, and contact your nearest dealer, service center or the store where you purchased the printer. Do not attempt to repair the printer yourself. : Do not disassemble ● Do not attempt to disassemble or modify the printer. Fire or electric shock may occur. For service and repair of internal pr...
Page 9 - : Maintenance and cleaning
: Maintenance and cleaning ● Disconnect the power cord from a power outlet when maintaining or cleaning the printer. Ⅶ
Page 10 - Table of Contents; Unpacking
Table of Contents ● Precautions for installation and handling……………………………..1, 2, 3 ● Unpacking ………………………………………………………………… …...4 ● Accessories…………………………………………………………………….5 ● Names of parts…………………………………………………………..6, 7, 8 ● Setting roll label……………………………………………………….9, 10, 11 ● Setting fa...
Page 11 - Precautions for installation and handling; Select a safe location
Precautions for installation and handling Printer operation can be affected by the printer environment. Refer to the following instructions for installation and handling of LM400e. ▲ Select a safe location When selecting a location for installation of LM400e, consider the following topics. Pl...
Page 13 - Power supply; Provide a stable source of electricity to the printer
▲ Power supply The LM400e Series require AC110-220V. Provide a stable source of electricity to the printer Do not share the power outlets with other appliances such as a heater and refrigerator requiring a measurable amount of power. Also, avoid using the power outlet near such appliances...
Page 14 - and plastic cover, it is ready for installation.
Unpacking Taking the LM400e from the box and removing the protective molded cover and plastic cover, it is ready for installation. Printer Accessory 2 Accessory 1 Box Protective molded cover (bottom) Protective molded cover (top) ...
Page 15 - Accessories; Box
Accessories Make sure you have received all of the following items in this package. If there are any accessories missing, contact your nearest dealer or the store where you purchased the printer. Power cord Quick Guide Power cord ▲ Box Keep the box and cushioning...
Page 16 - Names of parts
Names of parts Operation panel: LCD for displaying messages, two operation keys, two-color LED for indicating printer status Side cover Ribbon take-up spindle Ribbon supply spindle Label supply spindle Power ON/OFF switch: Turns power ON or OFF. “I” is ON. “O” is OF...
Page 17 - Fuse
Label stopper Secures the roll label Platen roller (consumable part) Discharges the printed media Thermal head (consumable part) Prints data on the media Head lock lever Fuse When the current exceeding particular level runs through the printer, a fus...
Page 19 - Setting roll label
Setting roll label 1 Open the side cover. Side cover 2 Push up the purple head lock lever in the direction of an arrow to open the thermal head. Thermal head Head lock lever 3 Turn the slide guide in the direction of an arrow and leave the guide on the angle. ...
Page 22 - Setting fan-fold label
Setting fan-fold label 1 Open the side cover. Push the nylon rivet from the inside of the printer and remove the cover for fan-fold opening. Side cover 2 Push up the purple head lock lever in the direction of an arrow to open the thermal head. Thermal head Head lock lever...
Page 25 - Setting carbon ribbon
Setting carbon ribbon Use only SATO carbon ribbons. Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or damage to the print head and may void your warranty. 1 Open the side cover. Side cover 2 Push up the purple head lock lever in the direc...
Page 28 - Adjusting Pitch Sensor
Adjusting Pitch Sensor 1 Open the side cover. Side cover 2 To adjust the pitch sensor position, Slide the green pitch sensor knob at the far end of the slide guide. It is located at the backmost (on the sensor frame side). Pitch sensor Pitch sensor knob 3 Close the si...
Page 29 - Turning on Power; Connect the power cord and turn on the printer.
Turning on Power Connect the power cord and turn on the printer. Power supply After installing the printer, connect the power cord as instructed below. ▲ Power cord and power outlet As shown in this picture, included power cord has three contacts. The socket has three contacts...
Page 30 - Turning the power ON
If your power outlet has two slots, use a 3- to 2-prong adapter. Turning the power ON Press the power switch to the direction of [I]. Warning Connect the earth lead to the ground slot. Failure to do so may cause electric shock. Power cord E...
Page 31 - LM400e Series specifications
LM400e Series specifications Model: LM408e / LM412e Print method: Thermal transfer / Direct thermal Print resolution: 203/305dpi 8 dots mm/12 dots mm Media size: Max. 128mm Width (including backing liner 131mm) Printable area: Max. 104mm width / Max. pitch 178mm Max. pr...
