Sanus VMAA26 - Manuals

Step 3: Add the Vise Assemblies to the Monitor Brackets: NOTE: Do not overtighten the 1/4-20 Nut (M). The Vise Assembly (F) should be able to rotate freely around the Carriage Bolt (L). Place the Vise Assembly ( F ) into the Monitor Bracket ( E ) so that the two Jaws point toward the set of 1” diame...

Step 4: Attach the Arm Assembly to the Television (Continued) CAUTION: The 1” Diameter Tubes (D) must extend beyond the outside edges of both Monitor Brackets (E) and the Allen Bolts in all 6 Vise Assemblies (F) must be tightened. Failure to do this will result in an installation that unstable and m...

Step 7: Leveling the Monitor and Adjusting the Tension CAUTION: Do not remove the Tension Nuts in Diagram 7. Removing Tension Nuts will result in property damage. Once the television is mounted onto the Wall Plate ( A ), and the Safety Bolts ( N ) are tight, it can be adjusted to level. Slightly loo...

Step 8: Add Preventor CAUTION: Avoid Pinch Points. Placing your hands or fingers between moveable parts (Pinch Points) may result in personal injury Determine which direction you want the Arm to fold. If you want the Arm to fold to the right, place the Preventor ( C ) on the right side of the Arm As...