Sanus FFSF1A - Manual
Sanus FFSF1A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – : Choose Correct Mounting Plate
- Page 5 – : Install Head Assembly on Monitor
- Page 6 – : Install Monitor on Pillar
- Page 7 – : Install Wire Channel Covers
Sanus Systems
2221 Hwy 36 West, St Paul, MN 55113 USA • (6901-100130 <03>)
USA Customer Service 1-800-359-5520 • www.sanus.com
FFSF1A
001480.eps
FPS10 - Full Assembly
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
WARNING
Thank you for choosing the Sanus Systems FFSF1A flat panel foundation
mount. The Sanus Systems FFSF1A flat panel foundation mount is
designed to support a flat panel monitor weighing up to 22 kg (50 lbs). The
lower shelf supports additional equipment weighing up to 11 kg (25 lbs).
Hardware for multiple mounting configurations is included.
OPT
Hardware and procedures for multiple mounting configurations are
included. When you see this symbol, choose the correct configuration to
suit your needs. Not all hardware included will be used.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6901-100130 <03> [32] 3: Choose Correct Mounting Plate 200mm x 200mm 75mm x 75mm or 100mm x 100mm 001482.epsFPS10 - Star 75mm 75mm [03] 001482.epsFPS10 - Star 100mm 100mm [03] For monitors with 200mm x 200mm hole spacing, you must remove the existing plate from the head assembly [03] and repla...
6901-100130 <03> 4: Install Head Assembly on Monitor For Monitors with Flat Back For Monitors with a Curved Back or an Obstruction 001516.eps 001516.eps [19], [20] [16], [17], [18] [21], [22], [23] [03] [19], [20] [16], [17], [18] [25], [26], [27] [03] [28], [29]
6901-100130 <03> 5: Install Monitor on Pillar 6: Install Shelf 001504.eps 001504.eps 001504.eps [01] [24] [03] 001505.eps 001505.eps [08] [30] [31] [09] [32]
