Sanus CFAR47 - Manuals - manualsarea.com

Page 2 - Parts: Not all parts shown at the same scale

Parts: Not all parts shown at the same scale (1) Shelf Retainer - u (1) Shelf Bracket - v (4) Small Door Hinge - w (4) Foot - s (4) Door Knob - t ** (4) Hinge Plate - x** (4) Bi-fold Hinge - y (4) Hinge Car - z (2) Furniture Bracket - aa (2) Wall Bracket - bb (3) Front Rail - cc (3) Back Rail - dd (...

Page 3 - ee; Detailed View B

Step 1: Add Wood Shelf Pins and Feet to Side Panels Insert a Wood Shelf Pin (h) into the holes adjacent to the two lower sets of cams in each Side Panel (ee). See Detailed View A of Diagram 1 for assistance. Add a Foot (s) to each pillar of the Side Panel (ee). If you wish to install the Carpet Spik...

Page 5 - kk

Step 3: Prepare TV Shelf Insert two Wood Screws (i) through the Shelf Bracket (v) and into the underside of the Wood Shelf (kk). Tighten each Wood Screw with a phillips screw driver. See Diagram 3 for assistance. Diagram 3 kk i v Step 4: Add Wood Shelves Press fit the Wood Shelves (kk) so they lock ...

Page 7 - dd

Step 7: Add Front and Back Rail Add Front Rail - Attach the Front Rail (cc) to the Side Panel (ee) by sliding the clamp down the groove in each Side Panel pillar as shown in the Top View of Diagram 7. Make sure the smooth side of the Front Rail is facing outward and the open channel faces down. Once...

Page 9 - ii; Step 10: Add Glass Shelf

Step 9: Add Top Insert a Dowel (f) into each hole in the bottom side of the Top (ii). Add Top so each Dowel is secured in the corner pillar in the Side As - sembly (ee). See Diagram 9 for assistance. Diagram 9 Detailed View ii f Step 10: Add Glass Shelf Add Glass Shelf Pins (g) to the desired locati...

Page 10 - gg; Detailed View C; hh

Step 11: Add Hinges and Knobs Add Hinges (w,y) to the Doors (gg,hh) by inserting a Hinge Screw (l) through the Hinge and into the Door. Tighten each with a phillips screw driver. Attach the Door Knobs (t) by inserting a Knob Bolt (j) through the Door (gg,hh) and into the Door Knob. Tighten each with...

Page 11 - Detailed View

Step 12: Add Hinge Plates and Small Doors Add the Hinge Plates (x) by inserting a Hinge Plate Screw (k) through the Hinge Plate, and into the holes in the Side Panel (ee). Tighten each with a phillips screw driver. Repeat the process for all four Hinge Plates. See Diagram 12 for assistance. To attac...

Page 12 - Step 14: Secure Wall Bracket to wall; wall stud; Step 15: Secure Assembly to wall; aa

Step 14: Secure Wall Bracket to wall Locate two wood studs using a stud finder. It is a good idea to verify where the stud is with a awl or a thin nail. Mark the location of each stud. To find the height, measure 54 inches up from the floor. Mark the location on the stud. Drill a 2.5” deep hole with...

Page 13 - Sanus Systems

Step 16: Hinge Adjustment for small Door Each hinge Assembly is adjustable in multiple directions. See Diagram 16 for assistance. Diagram 16 Side Adjustment Depth Adjustment Height Adjustment Step 17: Hinge Adjustment for Bi-fold Door To adjust the Bi-fold Hinges (y), loosen the screws labeled in th...