Sanus CFAR47 - Manual
Sanus CFAR47 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Parts: Not all parts shown at the same scale
- Page 3 – ee; Detailed View B
- Page 5 – kk
- Page 7 – dd
- Page 9 – ii; Step 10: Add Glass Shelf
- Page 10 – gg; Detailed View C; hh
- Page 11 – Detailed View
- Page 12 – Step 14: Secure Wall Bracket to wall; wall stud; Step 15: Secure Assembly to wall; aa
- Page 13 – Sanus Systems
Assembly Instructions for Model: CFAR47
Thank you for choosing the Component Furniture line from Sanus Systems! Use
this manual to configure the CFAR47 as shown on the right. The CFAR47 is de
-
signed to hold a LCD, Plasma or DLP TV.
Safety Warning:
If you do not understand these directions, or have any doubts
about the safety of the installation, please call a qualified contractor or contact Sa
-
nus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there
are no missing or defective parts. Our customer service representatives can quickly
assist you with installation questions and missing or damaged parts. Replacement
parts for products purchased through authorized dealers will be shipped directly to
you. Never use defective parts. Improper installation may cause damage or serious
injury. Do not use this product for any purpose that is not explicitly specified by
Sanus Systems. Sanus Systems can not be liable for damage or injury caused by
incorrect assembly, or incorrect use. Please call Sanus Systems before returning
products to the point of purchase.
Required Tools:
Drill, 3/16” drill bit, phillips screw driver, flat head screw driv
-
er, crescent wrench, tape measure.
Supplied Parts and Hardware: Hardware shown at actual size. Some
parts may come pre-assembled**
Sanus Systems
2221 Hwy 36 West. St. Paul, MN 55113 10.10.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
(4) Carpet Spike - a
(12) Cam Pin - b
(8) Spacer - c (8) Back Panel Bolt - d
(2) Phillips Pan Head Bolt - e
(4) Dowel - f
(4) Glass Shelf Pin - g (8) Wood Shelf Pin - h
(4) Wood Screw - i (4) Knob Bolt - j
**
(8) Hinge Plate Screw - k
**
(16) Hinge Screw - l
(2) Tip Protector Bolt - m
(2) Stop Nut - n
(8) Hinge Car Bolt - o
(2) Lag Bolt - p
(2) Lag Bolt Washer - q
(1) Allen Key - r
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Parts: Not all parts shown at the same scale (1) Shelf Retainer - u (1) Shelf Bracket - v (4) Small Door Hinge - w (4) Foot - s (4) Door Knob - t ** (4) Hinge Plate - x** (4) Bi-fold Hinge - y (4) Hinge Car - z (2) Furniture Bracket - aa (2) Wall Bracket - bb (3) Front Rail - cc (3) Back Rail - dd (...
Step 1: Add Wood Shelf Pins and Feet to Side Panels Insert a Wood Shelf Pin (h) into the holes adjacent to the two lower sets of cams in each Side Panel (ee). See Detailed View A of Diagram 1 for assistance. Add a Foot (s) to each pillar of the Side Panel (ee). If you wish to install the Carpet Spik...
Step 3: Prepare TV Shelf Insert two Wood Screws (i) through the Shelf Bracket (v) and into the underside of the Wood Shelf (kk). Tighten each Wood Screw with a phillips screw driver. See Diagram 3 for assistance. Diagram 3 kk i v Step 4: Add Wood Shelves Press fit the Wood Shelves (kk) so they lock ...
