Sangean K-200 - Manuals

5 1.2.3.4.5.6. Backlight buttonRDS buttonStandby / Auto offAlarm 2 buttonBand buttonStation presets Egg Timer buttonMessage 2 buttonMessage 1 buttonCT (auto clock time) buttonAlarm 1 button 7.8.9.10.11. Controls and connections

9 Display icons A.B.C.D.E.F.G.H.I.J. Battery capacity indicatorPM displayTime indicatorRDS iconSignal barCT iconAlarm 2 indicatorAlarm 1 indicatorFrequency displayTimer icon C

10 Using the radio for the first time A. AC operation 1. Place your radio on a flat surface.2. Insert the adaptor plug into the AC socket located on the back of your radio ensuring that the plug is pushed fully into the socket.3. Plug the other end of the adaptor into the wall socket. IMPORTANT: The...

11 Operating your radio – Search tuning AM/FM 1. Press the Standby button to switch on your radio. 2. Press the Band button as needed until the AM or FM band is selected. 3. Press and release the Tuning knob to carry out an auto-tune. Your radio will scan up the AM/FM band from the currently display...

12 Manual tuning – AM/FM 1. Press the Standby button to switch on your radio. 2. Press and release the Band button to select AM or FM radio mode. 3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 200kHz (American version) / 100kHz (European version) and AM f...

13 Setting up the tuning step increment 1. Make sure your radio is in power off mode. 2. Press and hold the Tuning control knob until the setting of time format begins to flash. 3. After setting up the time format, press and release the Tuning control to enter the step increment setting. 4. Rotate t...

14 Display modes – FM Your radio has a range of display options for FM radio mode. 1. Repeatedly press and release the RDS button to view the RDS information of the station you are listening to. a. b. c. d. Note:If no RDS information is available, then the radio will only be able todisplay the frequ...

15 Presetting stations in AM/FM modes There are 5 preset stations each for AM and FM radio. They are used inthe same way for each waveband. 1. Press the Standby button to switch on your radio. 2. Press the Band button to select the desired waveband. Tune to the required radio station as previously d...

16 Clock and Alarms Setting the time format The clock display used in stand-by mode and on the playing modescreens can be set to 12 or 24 hour format. The selected format is thenalso used when setting the alarms. 1. Make sure your radio is in power off mode. 2. Press and hold the Tuning control knob...

17 Setting the clock time manually 1. Press the Standby button to switch on your radio. 2. Press and hold the CT button until the radio beeps once to enter the clock time setting, and the hour setting will begin to flash. The display will show “CLOCKSET”. 3. Rotate the Tuning control to select the d...

18 Setting the clock time using RDS CT 1. Tuning to a station transmitting RDS data, and press and release the CT button. The LCD display will show . The clock time of the radio will set up automatically according to the RDS data received. 2. When the action is completed, will appear on the LCD disp...

19 Setting the alarm clock Your K-200 radio has two alarms which can each be set to wake you toAM/FM radio, buzzer alarm or voice messages. The alarms may be setwhile the unit is in standby mode or while playing. 1. Before setting an alarm ensure that the clock time is set. Press and hold the Alarm ...

22 Auto Off Timer Your radio can be set to turn off automatically after a preset timehas elapsed. The Auto Off Timer setting can be adjusted between15, 30, 45, 60, 90 and 120 minutes. 1. Press and hold the Standby button to enter the Auto Off Timer setting. “AUTO OFF 00” will show on the display. 2....

23 Egg Timer function 1. Press and release the Egg timer button to enter the egg timer setting. The egg timer setting will start flashing on the display. 2. Rotate the Tuning control to adjust the minute setting during 1 and 120 minutes with 1 minute interval. Press and release the Tuning control to...

24 Display Brightness control The brightness of the display when the unit is in standby mode maybe adjusted. If you use the unit in the bedroom, you may prefer a lowerstandby brightness level than the standard setting. 1. Press and release the Backlight button to adjust the current brightness level ...

25 Message function The message function can record and playback with 2 sets of voicemessage for 30 seconds each. 1. Press and hold the Message button to record the voice up to 30 seconds length. The LED is lighted during recording and the display will show “RECORD”. Press and release the Message bu...

27 Auxiliary input socket A 3.5mm stereo Auxiliary Input socket is provided on the rear of yourradio to permit an audio signal to be fed into the unit from an externalaudio device such as iPod, MP3 or CD player. 1. Repeatedly press and release the Band button until “AUX IN” is displayed. 2. Connect ...

28 Circuit Features Loudspeaker Output Power Headphone socketAuxiliary socket Aerial System 2.5” 8 ohm full range 3 Watt / 1.5 Watt (batteries) 3.5mm dia3.5mm dia FM Wire aerial If at any time in the future you should need to dispose of this product please note that: Waste electrical products should...