Sangean DCR-200 - Manuals

Sangean DCR-200 – Manual in PDF format online.

Manuals:

Manual

Manual Sangean DCR-200

Summary

Page 2 - Table of Contents

1 Table of Contents Important safety instructions .............................................. 2-3Introduction .............................................................................. 4Controls and connections .................................................... 5-8Display icons ...............

Page 3 - Important Safety Instructions

2 GB Important Safety Instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for further reference. 3. Heed warnings. All warnings on the appliance and operating instructi...

Page 5 - Introduction

4 GB Introduction The Sangean DCR-200 DAB/FM RDS Digital Receiver provides thefollowing range of features in an stream-lined portable size: Radio for DAB and FM (with RDS) broadcasts. 20 radio station presets (10 for DAB and 10 for FM) and 8 my favoritestations (4 for DAB and 4 for FM). Clock displa...

Page 6 - Controls and connections

5 1.2.3.4.5.6. Sleep timerBacklightAlarm / MenuStandbyBandAuto Tune Preset station 1 – 4TimerMessage buttonMessage buttonAdvanced setting / Info buttonMemory preset 7.8.9.10.11.12. Controls and connections

Page 10 - Display icons

9 Display icons A.B.C.D.E.F.G.H.I. Battery capacity indicatorAlarm 1 iconAlarm 2 iconDAB iconFM iconTimer iconSleep timer / snooze indicatorSignal strength indicatorTime / Radio display screen

Page 11 - Using the digital receiver for the first time

10 GB Using the digital receiver for the first time 1. Place your digital receiver on a flat surface. 2. Insert the adaptor plug into the DC in socket located on the back of your digital receiver ensuring that the plug is pushed fully into the socket. 3. Plug the other end of the adaptor into the wa...

Page 12 - Operating your digital receiver – DAB

11 Operating your digital receiver – DAB 1. Press the Standby button to switch on the digital receiver. If the digital receiver has been used before the last used mode will be selected. 2. Press and release the Band button as needed so that DAB mode is selected on the display. 3. If this is the firs...

Page 13 - Selecting a DAB radio station; Secondary services

12 GB Selecting a DAB radio station 1. Press the Standby button to switch on your digital receiver. The display will show “TUNING” for a few seconds. 2. Press the Band button to select DAB radio mode. The display normally shows the name of the current station selected. 3. Rotate the Tuning control t...

Page 14 - Display modes – DAB

13 Display modes – DAB Your digital receiver has a range of display options when in DAB mode: 1. Repeatedly press and release the Info button to cycle through the different options. a. b. c. d. Displays the name of the station beinglistened to. Displays scrolling text messages such asthe artist or t...

Page 16 - Finding new stations – DAB

15 Finding new stations – DAB Should you wish to use your digital receiver for DAB reception in anew location, or if no station were detected during the initial scan,you can follow this procedure to allow your digital receiver to find outwhich DAB radio stations are available. 1. With the unit in DA...

Page 18 - Dynamic Range Control (DRC) settings – DAB

17 Dynamic Range Control (DRC) settings – DAB Dynamic Range Control (also knows as DRC) can make quieter soundseasier to hear when your radio is used in a noisy environment.This function is only for the DAB waveband. 1. Press the Standby button to switch on your digital receiver. 2. Press the Band b...

Page 19 - Operating your digital receiver – Search tuning FM

18 GB Operating your digital receiver – Search tuning FM 1. Press the Standby button to switch on your digital receiver. 2. Press the Band button as needed until the FM band is selected. 3. Press and release the Auto-tune button to carry out an auto-tune. Your digital receiver will scan up the FM ba...

Page 20 - Manual tuning – FM

19 Manual tuning – FM 1. Press the Standby button to switch on your digital receiver. 2. Press and release the Band button to select FM radio mode. 3. Rotate the Tuning control to tune to a station. The frequency will change in steps of 50kHz. 4. When the end of the end of the waveband is reached yo...

Page 21 - Display modes – FM

20 GB Display modes – FM Your digital receiver has a range of display options for FM radio mode. 1. Repeatedly press and release the Info button to cycle through the different options. a. b. c. d. e. f. Note:If no RDS information is available, then the digital receiver will only beable to display th...

Page 23 - Presetting stations in DAB and FM modes

22 GB Presetting stations in DAB and FM modes There are 10 memory presets each for DAB and FM radio. Apart fromthe 10 presets, there are 4 my favorite stations. They are used in thesame way for each waveband. 1. Press the Standby button to switch on your digital receiver. 2. Press the Band button to...

Page 24 - Recalling a preset in DAB and FM modes

23 Recalling a preset in DAB and FM modes 1. Press the Standby button to switch on your digital receiver. 2. Select the required waveband by pressing the Band button. 3. To tune to one of the 4 my favorite stations stored in my favorite stations, press and release the my favorite station button. 4. ...

Page 25 - Clock and Alarms; Automatically updating the clock

24 GB Clock and Alarms Automatically updating the clock Your digital receiver will normally update the clock automatically whentuning to the radio broadcast. After a power failure the digital receiverwill then set its clock the next time that you turn on the digital receiverin DAB or FM mode.When th...

Page 26 - Setting the date format

25 Setting the date format 1. With your digital receiver switched on, press and hold down the Menu button to access the menu setting. 2. Rotate the Tuning control until “DATE FMT” shows on the display. Press and release the Tuning control to enter the date format setting. 3. Rotate the Tuning contro...

Page 27 - Setting the alarm clock

26 GB Setting the alarm clock Your DCR-200 digital receiver has two alarms which can each be set towake you to DAB, FM radio, voice message or buzzer alarm.The alarms may be set while the unit is in standby mode orwhile playing. The alarm clock setting will not function when the displayappears NO CL...

Page 32 - Egg timer function

31 Egg timer function 1. Press and release the Egg timer button to enter timer setting and rotate the Tuning control to adjust the minute setting during 1 and 120 minutes with 1 minute interval. 2. Press and release the Tuning control to finish the setting and the egg timer will start to countdown, ...

Page 33 - Display and Audio; Brightness control

32 GB Display and Audio Brightness control The brightness of the display when the unit is in standby mode maybe adjusted. If you use the unit in the bedroom, you may prefer a lowerstandby brightness level than the standard setting. 1. Press the Backlight button so that the display shows for example ...

Page 34 - Moon LED

33 Moon LED When using the digital receiver, you can turn on the moonlight LED atthe bottom of the receiver for your better listening experience. 1. Press and hold the Menu button to enter the menu setting. 2. Rotate the Tuning control until the display show “MOON LED”. Press and release the Tuning ...

Page 35 - Message function

34 GB Message function The message function can record and playback with 2 sets of voicemessage for 10 seconds each. 1. Press and hold the Message button to record the voice up to 10 seconds length. The LED is lighted during recording and the display will show RECORD. Press and release the Message b...

Page 36 - Key tone adjustment; Headphone socket

35 Key tone adjustment The sound of pressing the buttons of the receiver can beadjusted manually. 1. Press and hold the Menu button to enter the menu setting. 2. Rotate the Tuning control until the display shows “KEY TONE”. Press and release the Tuning control and select ON or OFF to activate or dea...

Page 38 - Information; System reset

37 Information System reset If your radio fails to operate correctly, or some digits on the display aremissing or incomplete carry out the following procedure. 1. Press and hold the Info button when the radio is in DAB or FM mode to enter Advanced Information. 2. Rotate the Tuning button until the d...

Page 39 - Software version display

38 GB Software version display 1. Press and hold the Info button when the radio is in DAB or FM mode to enter the Advanced Information. 2. Rotate the Tuning control until the display shows “SW VER”. Press the Tuning control again to show your digital receiver’s software information. 3. After a few s...

Page 40 - Specifications; Power Requirements; Frequency Range; Circuit Features

39 Specifications Power Requirements Mains Frequency Range FM: 87.5 – 108 MHz Channel Block DAB (BAND III) 5A – 13F Battery 4 X 1.5V Size “C” / UM-2 / R14 DC in 7.5V / 1.6ADC out 5V / 0.8A Circuit Features Loudspeaker Output PowerHeadphone socketAuxiliary socket Aerial System If at any time in the f...