Samsung SC9580 - Manuals

EN-3 2 OPERATING THE CLEANER 2-1. POWER CORD NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. Please make sure your cable is fully extended before use. 2-2. POWER CONTROL (INFRARED CONTROL) HANDLE CONTROL 1. Vacuum cleaner ON/OFF ( ) Press the ON/OFF button to op...

EN-4 ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dust- ing brush for cleaning deli- cate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. ELBOW EXTENDING TUBE (OPTION) 1. Connect the elbow exten...

EN-6 Once dust reaches the DUST FULL mark, empty the dust bin Take the dust bin out by pressing the button. Throw the dust away in the bin. After empting the DUST BIN, remove the obstacles like hair, fur on the cap of the DUST BIN. Before use, push the dust bin into the main body of the vacuum clean...

EN-7 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK - Please, check the dust bin and dust pack if suction is noticeably reduced or the filter check indicator lamp turns on after empting the dust bin. The lamp will illuminate to signal when suction is reduced. If the light comes on, please...

PROBLEM CAUSE REMEDY 0 - IF YOU HAVE A PROBLEM Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that...

4 ACCESSORY Push the accessory on tothe end of the hose han-dle. Pull out and turn the dust-ing brush for cleaning deli-cate areas. To use the upholstery tool,push the accessory on tothe end of the hose handlein the opposite direction. ELBOW EXTENDING TUBE (OPTION) 1. Connect the elbow extending tub...

6 Once dust reaches the DUSTFULL mark, empty the dust bin Take the dust bin out bypressing the button. Throw the dust awayin the bin. After empting the DUSTBIN, remove the obstacleslike hair, fur on the cap ofthe DUST BIN. Before use, push the dust bininto the main body of the vac-uum cleaner until ...

7 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK 4-2. CLEANING THE DUST BIN 4-3. CHECKING THE FILTER CHECK INDICATOR LAMP The lamp will illuminate to signalwhen suction is reduced.If the light comes on, please clean the DUST BIN as shown. - Please, check the dust bin and dust pack if suct...

9 6 CLEANING THE OUTLET FILTER Take out both the dust bin and thedust pack. Remove the motor protection filter fromthe vacuum cleaner. Shake and tap thedust from it and put back in machine. 5 CLEANING THE MOTOR PROTECTION FILTER 1 Pull out the HEPA Filter as shown. 2 Dust the HEPA filter. 3 Put the ...

PROBLEM CAUSE REMEDY 0 - IF YOU HAVE A PROBLEM Motor does not start. No power supply.Thermal cut-out. Check cable, plug and socket.Leave to cool. Suction force is graduallydecreasing. Nozzle, suction hose or tubeis blocked. Check for blockage andremove it. Cord does not rewind fully. Check that the ...