Samsung SR8751 - User Manual

contents _05 contents SAFETY INFORMATION 02 06 Power Related 07 Before Use 10 In Use 11 Cleaning and Maintenance PRODUCT FEATURES 13 ASSEMBLING THE CLEANER 15 15 Components16 Name of each part OPERATING THE CLEANER 20 20 Installing the vacuum cleaning robot 20 Installation order 20 Turning the Power...

06_ safety information POWER RELATED WARNING Do not bend the power cord forcefully or place a heavy object on it that could break it. This may result in fi re or electric shock. - WARNING Make sure to remove any dust or water from the power plug. Failing to do so may result in a malfunction or electr...

safety information _07 01 SAFETY INFORMA TION BEFORE USE CAUTION Before activating the vacuum cleaning robot, make sure that the dust bin is assembled. If the dust bin is not inserted, vacuum cleaning robot will not - operate. CAUTION Never use vacuum cleaning robot in locations with combustible mat...

10_ safety information IN USE CAUTION You cannot use the vacuum cleaning robot on thick carpets. This may result in problems with the vacuum cleaning robot. - This may result in damage to carpets. - CAUTION Do not use the vacuum cleaning robot on a table or other high locations. This may result in d...

safety information _11 01 SAFETY INFORMA TION NOTE Vacuum cleaning Robot may not be able to continue its operation if it is stuck at the entrance or veranda doorsill. Vacuum cleaning Robot stops operating for safety reasons if it - cannot move for more than 5 minutes.To resume operating, turn the Po...

product features _13 What is ceiling shape recognition (Visionary • mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to identify the area to be cleaned and determines the best way to pass over and clean every section of the fl oor. DELICATE CLEANING OF EVERY C...

14_ product features AUTO CHARGING When the battery is low, the Vacuum cleaning Robot is automatically guided to the charger to enable it to perform a quick auto charge. EDGE-CLEANING SIDE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges. DOORSILL CROSSING About 1.5 cm...

assembling the cleaner _15 02 ASSEMBLING THE CLEANER COMPONENTS Others Components ■ Option Option ❈ ❈ User Manual Cleaning Brush Remote Control / 2 Batteries assembling the cleaner Main Body ■ Charger (Station) ■ DJ68-00682F(0.0).indd 15 DJ68-00682F(0.0).indd 15 2012.9.7 9:17:11 AM 2012.9.7 9:17:11 ...

16_ assembling the cleaner NAME OF EACH PART Main unit ■ Front Bottom Side Remote Control Sensor Remote Control Sensor Dust Bin Eject Button Dust Bin Eject Button Dust Bin Dust Bin Operating Button Operating Button Obstacle Sensor Obstacle Sensor Remote Control Sensor Remote Control Sensor Obstacle ...

18_ assembling the cleaner Remote Control (Option) ■ Installing the Remote Control Batterise ■ Batteries are not installed in the remote control when purchasing the product.Install the batteries (type AAA) before use. 1 1 2 2 3 3 Lift the battery compartment cover at the back of the remote control, ...

assembling the cleaner _19 02 ASSEMBLING THE CLEANER DISPLAY PART Battery Level Indicator 1. Charging: Shows the charging progress in 3 steps. - In Use: Shows the battery charge level. The battery charge level is reduced by each level from - FULL while operating.Recharging 2. This icon turns on when...

20_ operating the cleaner INSTALLING THE VACUUM CLEANING ROBOT Installation order Turning the Power Switch on or off 1. To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit. Installing the Charger 2. To charge the vacuum cleaning robot, you must fi rst in...

operating the cleaner _21 03 OPERA TING THE CLEANER Installing the charger Install the charger on a fl at surface. 1. There should be no obstacles and cliffs 0.5m to the left and 2. right and within 1 m of the front. Install the charger in a location where it can be easily accessed by 3. the vacuum c...

22_ operating the cleaner Charging When the product is initially purchased, the battery is fully discharged, and you must charge the vacuum cleaning robot manually. Turn on the Power Switch at the bottom of the product. After aligning the charge pins of the main unit with the 1. charge pin of the ch...

operating the cleaner _23 03 OPERA TING THE CLEANER NOTE When the product is initially purchased, it will take about 120 minutes to fully charge the • battery and will run for about 90 minutes.When charging the battery while the battery is over-heated, the charging time can increase. • Measures to t...

24_ operating the cleaner USING THE VACUUM CLEANING ROBOT Starting/Stopping Cleaning You can run or stop all vacuum cleaning robot functions. Each vacuum cleaning robot function only runs when the ■ Power Switch is turned on. When the robotic vacuum is operating, press the ( ■ ) button to cancel the...

operating the cleaner _25 03 OPERA TING THE CLEANER Recharging You can have the Vacuum cleaning Robot return to the charger to charge the battery by using the Recharging button. When the Vacuum cleaning Robot is operating, press the ( ■ ) button to cancel the operation and press the Recharging butto...

26_ operating the cleaner Auto Cleaning The Vacuum cleaning Robot will move by itself and automatically clean the house until cleaning is completed once. If cleaning begins when the Vacuum cleaning Robot is docked with the ■ charger station, the time to return to the charger is decreased since the V...

operating the cleaner _27 03 OPERA TING THE CLEANER Spot Cleaning You can conveniently clean a specifi c area that has a a lot of cookie crumbs, dust, and etc. Move the Vacuum cleaning Robot to the location where you want to ■ perform a spot clean. Main unit button Remote control button (Option) Con...

28_ operating the cleaner Max Cleaning The Vacuum cleaning Robot automatically moves and cleans until the battery runs out and the battery level fl ashes only one level. If cleaning begins when the Vacuum cleaning Robot is docked with ■ the charger station, the time to return to the charger is decre...

30_ maintain tools and fi lters CLEANING THE VACUUM CLEANING ROBOT Please keep the cleaning and maintenance methods in mind When the Power Switch is damaged, please contact the service ■ agent so that it does not cause any accidents.Do not use any means or mechanical devices not installed by the ■ m...

maintain tools and fi lters _31 04 MAINT AIN TOOLS AND FIL TERS Cleaning the Dust Bin and the Filters First, empty the dust bin before cleaning it. When separating the dust bin, take care not to spill the dust ■ out of the dust bin.Empty the dust bin in the following cases. ■ When dust has accumulat...

32_ maintain tools and fi lters CLEANING THE VACUUM CLEANING ROBOT Cleaning the Power Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. • Because the dust in the dust bin may come out, separate the dust bin fi rst before cleaning the power bru...

34_ maintain tools and fi lters Cleaning the Edge-Cleaning Side rotating Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. Check whether the side rotating brush is bent or whether there 1. are any foreign substances stuck on the brush. Wearin...

maintain tools and fi lters _35 04 MAINT AIN TOOLS AND FIL TERS Cleaning the Driving Wheel You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. If the vacuum cleaning robot suddenly starts to zigzag, there may ■ be foreign substances stuck on the driving whe...

36_ troubleshooting CHECKLIST BEFORE SVC CALLS Symptom Checklist Measure to Take Vacuum cleaning Robot does not operate at all before cleaning. Is the dust bin assembled? • Install the dust bin. • Is the Power Switch turned on? • Turn on the Power Switch. • Is cleaning mode ( • ) in the display pane...

38_ troubleshooting TROUBLESHOOTING FOR ERROR CODES ERROR CODE CAUSE SOLUTION Vacuum cleaning Robot is • caught, stuck or trapped while navigating. Turn off the Power Switch at the bottom • and move the Vacuum cleaning Robot to a different location. Flash Flash A foreign substance (string, • paper, ...

product specifi cation _39 06 PRODUCT SPECIFICA TION 90 mm (Height) 90 mm (Height) 355 mm (Length) 355 mm (Length) 355 mm (Width) 355 mm (Width) 275 mm (Width) 275 mm (Width) 161 mm (Length) 161 mm (Length) 122 mm (Height) 122 mm (Height) Main Body Charger (Station) Classifi cation Item Detail Mecha...