Samsung MWR-WW00 - Manuals

8 Description of each control Buttons ③ ① ⑦ ⑧ ④ ② ⑮ ⑨ ⑭ ⑫ ⑬ ⑩ ⑪ ⑥ ⑤ ki]_TWZ`^[hTW\†pi†zvsGk}tGo{G㡔㉔⫠⯜䀜†l|†lu†U•‹‹GGG_ YWYYTXXTY_GGG㝘㤸G`aZ^aX]

10 Operating basic mode of Hydro unit/Hydro unit HT Operate basic mode by pressing the [Mode] button. Auto Hydro unit/Hydro unit HT will automatically adjust the temperature of discharge water with auto mode for indoor heating. Cool You can adjust cooling temperature as you like with cool mode to co...

12 DHW mode of Hydro unit/Hydro unit HT You can adjust temperature of hot water tank by providing hot water. Press the Mode button in DHW. f Select (economic), (standard), and (power) by pressing the Mode button in DHW section. • You cannot select cool mode during the hot water mode.• To operate hot...

13 ENGLISH Checking set temperature You can check the set temperature of current operation mode by the set temperature check function. Check the set temperature by pressing the Set button. f The set temperature of basic operation mode and hot water mode can be checked by pressing the Set button repe...

14 Setting weekly timer You can operate or stop a desired mode on the day and time you reserve. (Only cool/heat mode can be set.) 1. Press the Timer button. f (Timer) will be displayed and then select 'Weekly' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] button. 2. After pressing ...

16 Setting a holiday with weekly timer You can set a holiday with the weekly timer. The set weekly timer will not function when holiday setting is applied. 1. Press the Timer button. f (Timer) is displayed and then select 'Holiday' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] butt...

17 ENGLISH Canceling a weekly timer You can cancel weekly timer function. 1. Press the Timer button. f (Timer) is displayed and (Weekly) will blink. 2. After pressing the [＞] button, select the 'Day' you want to cancel. f Select a reserved day by pressing the [∧] / [∨] button. 3. After pressing the ...

18 Setting daily timer Hydro unit/Hydro unit HT can operate or stop at the time you reserve every day. (Only standard hot water mode can be set.) 1. Press the Timer button. f (Timer) will be displayed and then select 'Daily' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] button. 2. ...

20 How to set the detailed setting (User setting mode) 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to enter the user set mode, press the User set button. f You will enter the User Set mode, and the 'main menu' will be displayed. 2. Refer to the Wired Remote Controller’s User Set list on the n...

21 ENGLISH User setting mode Main menu Sub- menu Function SEG number Default Range Unit 1 1 All lock 1 0 0-Unlock, 1-Lock - 2 Partial key lock Operation On/Off key lock 1 0 0-Unlock, 1-Lock Mode key lock 2 0 0-Unlock, 1-Lock Temperature setting key lock 3 0 0-Unlock, 1-Lock Timer key lock 4 0 0-Unlo...

24 Trouble shooting Before reporting the problems of your appliance, please check the trouble shooting table below. PROBLEM SOLUTION Hydro unit/Hydro unit HT does not work. • Check if there is a power failure. After checking the status of power supply, operate the product again. • Check if auxiliary...

25 ENGLISH Memo ki]_TWZ`^[hTW\†pi†zvsGk}tGo{G㡔㉔⫠⯜䀜†l|†lu†U•‹‹GGGY\ YWYYTXXTY_GGG㝘㤸G`aZ^aYY

8 Wired remote controller installation Tracking Hydro unit/Hydro unit HT from a wired remote controller The number of Hydro unit/Hydro unit HT currently detected Display tracking is being performed. 1. Tracking of your wired remote controller will automatically start when you turn on the power after...

9 ENGLISH Individual control with your wired remote controller f f Individual control means that you are using one remote controller to control one indoor unit or one Hydro unit/Hydro unit HT. When connecting the Hydro unit/Hydro unit HT only Outdoor unit COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM2(...

10 Wired remote controller installation Group control with your wired remote controller f f Group control means that you are using one wired remote controller to control two or more Hydro unit/Hydro unit HTs at the same time. When connecting the Hydro unit/Hydro unit HT only 1) Using one wired remot...

11 ENGLISH Controlling 2-remote controller f f 2-Remote controller is controlling one Hydro unit/Hydro unit HT with two remote controllers. f f When setting the wired remote controller as ‘Indoor temperature standard/wired remote controller sensor use’, please install the master remote controller at...

12 Wired remote controller installation Sharing the temperature of hot water tank sensor Connecting one wired remote controller Outdoor unit COM1(F1, F2) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM1(F1, F2) Hydro unit/ Hydro unit HT Wired remote controller Hydro unit/ Hydro unit HT Hydro unit/ Hydro ...

13 ENGLISH Connecting 2 or more wired remote controller Outdoor unit COM1(F1, F2) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM1(F1, F2) Hydro unit/ Hydro unit HT Wired remote controller Wired remote controller Hydro unit/ Hydro unit HT Hydro unit/ Hydro unit HT Unit No. 1 Unit No. 2 Unit No. 3 Hot wat...

14 Wired remote controller installation Initializing your wired remote controller communication 1. Press the Esc and Delete buttons at the same time for more than 5 seconds. f f The communication of your wired remote controller will be initialized, and the device will search for the Hydro unit/Hydro...

16 Use of wired remote controller installation / service mode Use of installation/service mode 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to use the installation/service mode for your wired remote controller, press the Set and ESC buttons at the same time for more than 3 seconds. f f You wil...

17 ENGLISH Installation/Service mode • 'NONE' will be displayed for the menu that setting modes don't support. In some cases, the setting may not be possible or it may not be applied though it is set on the unit. • If communication initialization is needed after saving the setting, the system will r...

18 Use of wired remote controller Use of user setting mode 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to use the various user setting modes for your wired remote controller, press the User Set button. 2. Refer to the list of user setting mode for your wired remote controller on the next page...

19 ENGLISH User setting mode • 'NONE' will be displayed for the menu that setting modes don't support. In some cases, the setting may not be possible or it may not be applied though it is set on the unit. • If communication initialization is needed after saving the setting, the system will reset aut...

20 Field specification setting mode of wired remote controller Use of field specification setting mode Data Main menu Sub-menu 1. If you want to use the field specification setting mode for your wired remote controller, press the Set and [∨] buttons at the same time for more than 3 seconds. 2. Refer...

21 ENGLISH Field specification setting mode 1. Hydro unit Classification Function Detail Code (Main + sub menu) Basic Min. Max. Step Unit Remote controller Temperature of general cooling leaving water Max. 1011 25 18 25 1 °C Min. 1012 16 5 18 1 °C General indoor cooling temperature Max. 1021 30 28 3...

27 ENGLISH Use of field specification checking mode Data Sub-menu Main menu 1. If you want to use the field specification checking mode for your wired remote controller, press the Set and [∧] buttons at the same time for more than 3 seconds. 2. Refer to the list of field specification for your wired...

28 Self-test mode of wired remote controller Use of self-test mode 1. You can use the self-test mode when you set the 'self-test entering' as 'Yes' in the installation/service mode. f f Select main menu 1  sub-menu 2 in the installation / service mode. 2. When using the self-test mode of the wired ...