Samsung MWR-WW00 - Installation Manual

Page 2 - Safety information; CAUTION; minor personal injury or property damage.; WARNING; Contact a service center for installation.

2 Safety information This installation manual explains how to install a wired remote controller connected to a Hydro unit/Hydro unit HT. Please read this manual thoroughly before installing the remote controller.(Please refer to the corresponding installation manual for product and other optional in...

Page 3 - ENGLISH; Do not install the product where imflammable content may leak.

3 ENGLISH CAUTION Do not install the product where imflammable content may leak. f f Failure to do so may result in fire and explosion. Ensure no water gets into the wired remote controller. f f Failure to do so may result in electric shock and fire. Install the product away from direct exposure to ...

Page 4 - Wired remote controller installation; Accessories; External Dimensions

4 Wired remote controller installation Accessories Name Wired remote controller Cable tie Cable clamp M4X16 Screw User Manual Installation Manual U-Terminal Quantity 1 2 3 5 1 1 6 Shape • The wired remote controller should be installed by a certified technician. • Check and confirm the power is off ...

Page 8 - Tracking Hydro unit/Hydro unit HT from a wired remote controller; Esc; Delete

8 Wired remote controller installation Tracking Hydro unit/Hydro unit HT from a wired remote controller The number of Hydro unit/Hydro unit HT currently detected Display tracking is being performed. 1. Tracking of your wired remote controller will automatically start when you turn on the power after...

Page 9 - Individual control with your wired remote controller

9 ENGLISH Individual control with your wired remote controller f f Individual control means that you are using one remote controller to control one indoor unit or one Hydro unit/Hydro unit HT. When connecting the Hydro unit/Hydro unit HT only Outdoor unit COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM2(...

Page 10 - Group control with your wired remote controller

10 Wired remote controller installation Group control with your wired remote controller f f Group control means that you are using one wired remote controller to control two or more Hydro unit/Hydro unit HTs at the same time. When connecting the Hydro unit/Hydro unit HT only 1) Using one wired remot...

Page 11 - Controlling 2-remote controller

11 ENGLISH Controlling 2-remote controller f f 2-Remote controller is controlling one Hydro unit/Hydro unit HT with two remote controllers. f f When setting the wired remote controller as ‘Indoor temperature standard/wired remote controller sensor use’, please install the master remote controller at...

Page 12 - Sharing the temperature of hot water tank sensor; Connecting one wired remote controller

12 Wired remote controller installation Sharing the temperature of hot water tank sensor Connecting one wired remote controller Outdoor unit COM1(F1, F2) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM1(F1, F2) Hydro unit/ Hydro unit HT Wired remote controller Hydro unit/ Hydro unit HT Hydro unit/ Hydro ...

Page 13 - Connecting 2 or more wired remote controller

13 ENGLISH Connecting 2 or more wired remote controller Outdoor unit COM1(F1, F2) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) COM1(F1, F2) Hydro unit/ Hydro unit HT Wired remote controller Wired remote controller Hydro unit/ Hydro unit HT Hydro unit/ Hydro unit HT Unit No. 1 Unit No. 2 Unit No. 3 Hot wat...

Page 14 - Initializing your wired remote controller communication; Press the; Error display on the wired remote controller; Error indications are displayed as seen below.

14 Wired remote controller installation Initializing your wired remote controller communication 1. Press the Esc and Delete buttons at the same time for more than 5 seconds. f f The communication of your wired remote controller will be initialized, and the device will search for the Hydro unit/Hydro...

Page 16 - Use of wired remote controller installation / service mode; Use of installation/service mode; Set

16 Use of wired remote controller installation / service mode Use of installation/service mode 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to use the installation/service mode for your wired remote controller, press the Set and ESC buttons at the same time for more than 3 seconds. f f You wil...

Page 17 - Installation/Service mode

17 ENGLISH Installation/Service mode • 'NONE' will be displayed for the menu that setting modes don't support. In some cases, the setting may not be possible or it may not be applied though it is set on the unit. • If communication initialization is needed after saving the setting, the system will r...

Page 18 - Use of wired remote controller; Use of user setting mode; User Set

18 Use of wired remote controller Use of user setting mode 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to use the various user setting modes for your wired remote controller, press the User Set button. 2. Refer to the list of user setting mode for your wired remote controller on the next page...

Page 19 - User setting mode

19 ENGLISH User setting mode • 'NONE' will be displayed for the menu that setting modes don't support. In some cases, the setting may not be possible or it may not be applied though it is set on the unit. • If communication initialization is needed after saving the setting, the system will reset aut...

Page 20 - Field specification setting mode of wired remote controller; Use of field specification setting mode

20 Field specification setting mode of wired remote controller Use of field specification setting mode Data Main menu Sub-menu 1. If you want to use the field specification setting mode for your wired remote controller, press the Set and [∨] buttons at the same time for more than 3 seconds. 2. Refer...

Page 21 - Field specification setting mode

21 ENGLISH Field specification setting mode 1. Hydro unit Classification Function Detail Code (Main + sub menu) Basic Min. Max. Step Unit Remote controller Temperature of general cooling leaving water Max. 1011 25 18 25 1 °C Min. 1012 16 5 18 1 °C General indoor cooling temperature Max. 1021 30 28 3...

Page 27 - Use of field specification checking mode; buttons at the same time for more than 3 seconds.

27 ENGLISH Use of field specification checking mode Data Sub-menu Main menu 1. If you want to use the field specification checking mode for your wired remote controller, press the Set and [∧] buttons at the same time for more than 3 seconds. 2. Refer to the list of field specification for your wired...

Page 28 - Self-test mode of wired remote controller; Use of self-test mode

28 Self-test mode of wired remote controller Use of self-test mode 1. You can use the self-test mode when you set the 'self-test entering' as 'Yes' in the installation/service mode. f f Select main menu 1  sub-menu 2 in the installation / service mode. 2. When using the self-test mode of the wired ...