Samsung MWR-WH02 - Manuals

E- 5 ENGLISH Getting Started You have just purchased a wired remote controller and it has been installed by your installation specialist. Your User’s Manual contain much valuable information on using your wired remote controller. Please take the time to read them as they will help you take full adva...

E- 6 The room temperature and the fan speed are controlled automatically in the auto mode. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently used mode. The ai...

E- 7 ENGLISH Selecting the Cooling Mode Select the cooling mode to lower the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently used mode. Th...

E- 8 Select the dry mode if the room is too humid. Using this mode will slightly lower the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently...

E- 9 ENGLISH Selecting the Fan Mode Select the fan mode to circulate air without changing the temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently u...

E- 10 Select the heat mode to raise the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently used mode. The air conditioner has a built-in prot...

E- 11 ENGLISH Selecting the Quiet Mode Select the quiet mode to run the indoor unit as quietly as possible. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: The air conditioner will be turned on with the most recently ...

E- 12 Selecting the Sleep Mode Select the sleep mode to sleep in comfort without worrying to turn off the air conditioner in the middle of the night. The air conditioner will turn off automatically after 6 hours. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) but...

E- 13 ENGLISH Adjusting the Air Swing Direction Adjust the air swing direction to circulate the air according to various needs. By adjusting the air swing direction, the efficiency of the air conditioner can be increased. 1 Press the button. Result:  The blade will start swinging up and down.  Pre...

E- 14 Checking the Room Temperature You can check the current room temperature. 1 Press the button to check the room temperature. Result: The room temperature will be displayed for 3 seconds and return to set temperature display. Note The room temperature may be slightly different depending on the i...

E- 15 ENGLISH Setting the On Timer You can set the indoor unit, which is connected to the wired remote controller, to turn on at the pre-set time. 1 Press the button to set the On Timer. Result:  Default time (0.5 hour) will be displayed and the ‘On’ indicator will blink.  If the On Timer is alrea...

E- 16 Setting the Off Timer You can set the indoor unit, which is connected to the wired remote controller, to turn off at the pre-set time. 1 Press the button to set the Off Timer. Result:  Default time (0.5 hour) will be displayed and the ‘Off’ indicator will blink.  If the Off Timer is already ...

E- 17 ENGLISH Setting the Auto Stop Function The wired remote controller can be set to turn off the indoor unit(s) after a set period of time has passed since any button on the remote controller was last pressed. This function is used to turn off the indoor unit in case the user forgets to turn off ...

E- 18 Setting the Temperature Limits You can set upper limit/lower limit temperature so that the desired temperature is not set too high or low. 1 Press the button for 3 seconds to enter the setup mode. Result: The wired remote controller will enter the setup mode and the menu will display . 2 Press...

E- 19 ENGLISH Locking the Part of the Wired remote controller To prevent the wired remote controller from children and changing settings unwillingly, you can lock some functions of wired remote controller. 1 Press the button for 3 seconds to enter the setup mode. Result: The wired remote controller ...

E- 20 Setting the Easy Tuning You can set the indoor unit which is connected to the wired remote controller to start easy tuning mode. 1 Press the button for 3 seconds to enter the setup mode. Result: The wired remote controller will enter the setup mode and the menu will display . 2 Press the butto...

Wired Remote Control MWR-WH02 Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. DB98-33323A-02 IT FR ES EN PT EL NL PL HU AR RU DE This manual is made with 100% recycled paper.

E- 5 ENGLISH Installing the Wired remote controller Installing the Power Cables inside of Indoor Unit This is an explanation of power supply cable and communication cable. Make sure that you read this thoroughly before installation. Connector type cable connection Terminal type cable connection AC P...

E- 6 Installing the Wired remote controller (Continued) 1 Open the wired remote controller by pushing up the top cover of the remote controller while holding the rear cover firmly. The wired remote controller opens in the way of slide. 2 Install the rear cover of the wired remote controller on the w...

E- 7 ENGLISH  Default settings  After changing the setting of PCB, make sure to initialize the system. - To initialize the system, press the , buttons at the same time for 5 seconds.  If the indoor unit does not support SW5 and SW6 options, indoor unit temperature sensor will be used regardless o...

E- 8 Installing the Wired remote controller (Continued) Wired remote controller Error Codes The error codes of the wired remote controller, indoor unit, outdoor unit are displayed on the LCD display. Refer to the indoor and outdoor unit technical manuals for the error codes reference. When the indoo...

E- 9 ENGLISH Installing the Wired remote controller (Continued) Error display priority  Priority 1: Wired remote controller error > Indoor/Outdoor unit error Priority 2: Displays master indoor unit error (Master Indoor unit = Indoor unit whose option switch K10 is set OFF) Priority 3: Displays t...

E- 11 ENGLISH Installing the Wired remote controller (Continued) Connecting the Wired remote controller Individual Control  Using one wired remote controller for one indoor unit. Outdoor unit Indoor unit COM1(F1, F2) COM2(F3, F4) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) Wired remote controller RMC:0 ...

E- 12 Installing the Wired remote controller (Continued) RMC:2 Group Control - indoor units only Using one wired remote controller for a group of indoor units.  Group control of 3 indoor units with one wired remote controller Outdoor unit Indoor unit COM1(F1, F2) COM1(F1, F2) Wired remote controlle...

E- 13 ENGLISH Installing the Wired remote controller (Continued) Using 2 wired remote controllers-indoor units only 2 wired remote controllers can be used to control a single indoor unit or a group of indoor units. Using 1 MWR-WH02 and 1 MWR-WE00 - Indoor unit and ERV together 1 SW1 SW2 SW3 SW4 SW5 ...

E- 14 Additional Functions Service Mode  The wired remote controller supports the following service modes. Menu Description Checking and Setting the Indoor Unit Option CodeChecking and Setting the Indoor Unit Main/Group AddressChecking the Indoor Unit Cycle DataChecking and Setting the Indoor Tempe...

E- 15 ENGLISH Additional Functions Checking and Setting the Indoor Unit Option Code In order to check and set the indoor unit option code usingthe wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button to enter the indoor unit opt...

E- 16 Additional Functions (Continued) Checking and Setting the Indoor Unit Main/ Group Address In order to check and set the indoor unit Main/Group Address using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button and the ...

E- 17 ENGLISH Additional Functions (Continued) Checking the Indoor Unit Cycle Data In order to check the indoor unit cycle data using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button twice and the menu will display . 2 P...

E- 18 Additional Functions (Continued) Checking and Setting the Indoor Temperature Compensation for the Wired remote controller In order to check and set the indoor temperature compensation using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will d...

E- 19 ENGLISH Additional Functions (Continued) Checking the RPM Compensation In order to check the RPM compensation using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button. The curre...

E- 20 Additional Functions (Continued) Menu No. Set value Checking the EEV Step for the Stopped Indoor Unit during the Heating Mode In order to check EEV step when the indoor unit is off during heating mode using the wired remote controller, hold down the and buttons at the same time for 5 seconds. ...

E- 21 ENGLISH Additional Functions (Continued) Checking the Filter Time Setting In order to check the filter time setting using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. Th...

E- 22 Additional Functions (Continued) Menu No. Set value Checking the Temperature Compensation Value under the Heating Mode In order to check the temperature compensation value under heating mode using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu...

E- 23 ENGLISH Additional Functions (Continued) Checking the Centralized Control Usage In order to check the centralized control usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the...

E- 24 Additional Functions (Continued) Menu No. Set value Checking the Drain Pump Usage In order to check the drain pump usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button...

E- 25 ENGLISH Additional Functions (Continued) Checking the Electric Heater Usage In order to check the electric heater usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button....

E- 26 Additional Functions (Continued) Menu No. Set value Checking the Water Coil Usage In order to check the water coil usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button...

E- 27 ENGLISH Additional Functions (Continued) Menu No. Set value Checking the External Control Usage In order to check the external control usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displaye...

E- 28 Additional Functions (Continued) Checking the Connected Indoor Unit/ERV Quantity In order to check the connected indoor unit/ERV quantity using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. ...

E- 29 ENGLISH Additional Functions (Continued) Checking the Wired remote controller PCB Settings In order to check the DIP switch settings using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Pre...

E- 30 Checking the Wired remote controller Software Version In order to check the wired remote controller software version using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. W...

E- 31 ENGLISH Checking and Setting the Fresh Duct discharge temperature In order to check and set the Fresh Duct discharge temperature using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press t...

E- 32 Checking and Setting an indoor unit DIP option code In order to check and set the indoor unit DIP option code using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The curr...

E- 33 ENGLISH Checking the update version of a wired remote controller program In order to check the update version of a wired remote controller program, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The u...

E- 34 Checking the status of Automatic ESP setting In order to check the status of Automatic ESP setting by using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The status of Au...

E- 35 ENGLISH Setting Automatic ESP Operation and Voltage In order to set Automatic Air-Volume operation by using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The current Auto...

Wired Remote Control MWR-WH02 Air Conditioner installation manual imagine the possibilities Thank you for purchasing this Samsung product. IT FR ES EN PT EL DB98-33322A-03 AR RU DE