Page 2 - Safety Precautions; WARNING
E- 2 Safety Precautions Read carefully this installation manual before installation and check if the wired remote controller is installed correctly after installation. Do not attempt to install or repair this wired remote controller by yourself. This wired remote controller contains no user-se...
Page 3 - Contents; The illustrations will help you to understand the; PRESS
E- 3 ENGLISH Contents W ired remote controller and a ccessories ................................................................................... 4 Accessories .........................................................................................................................................
Page 4 - Wired remote controller and Accessories; Accessories; The following accessories are supplied with the air conditioner.; Dimension; Make sure the main power is off before installing the wired remote
E- 4 Wired remote controller and Accessories Accessories The following accessories are supplied with the air conditioner. The number of each accessory is indicated in parentheses. Dimension (Unit : mm) The wired remote controller should be installed by a trained installer. Make sure the main p...
Page 5 - Installing the Wired remote controller; Installing the Power Cables inside of Indoor Unit; Make sure that you read this thoroughly before installation.; Connector type cable connection
E- 5 ENGLISH Installing the Wired remote controller Installing the Power Cables inside of Indoor Unit This is an explanation of power supply cable and communication cable. Make sure that you read this thoroughly before installation. Connector type cable connection Terminal type cable connection AC P...
Page 6 - Installing the Wired remote controller (Continued); that, arrange the power cables on rear side of the front cover.; Installation
E- 6 Installing the Wired remote controller (Continued) 1 Open the wired remote controller by pushing up the top cover of the remote controller while holding the rear cover firmly. The wired remote controller opens in the way of slide. 2 Install the rear cover of the wired remote controller on the w...
Page 7 - Setting the Wired Remote Controller Options; Switch
E- 7 ENGLISH Default settings After changing the setting of PCB, make sure to initialize the system. - To initialize the system, press the , buttons at the same time for 5 seconds. If the indoor unit does not support SW5 and SW6 options, indoor unit temperature sensor will be used regardless o...
Page 8 - Wired remote controller Error Codes; The error codes of the wired remote controller, indoor unit,; When the indoor/outdoor unit error occurs; and error code are displayed in turns.; When the wired remote controller error occurs; Ex) 601 error occurred in the wired remote controller
E- 8 Installing the Wired remote controller (Continued) Wired remote controller Error Codes The error codes of the wired remote controller, indoor unit, outdoor unit are displayed on the LCD display. Refer to the indoor and outdoor unit technical manuals for the error codes reference. When the indoo...
Page 9 - Error display priority
E- 9 ENGLISH Installing the Wired remote controller (Continued) Error display priority Priority 1: Wired remote controller error > Indoor/Outdoor unit error Priority 2: Displays master indoor unit error (Master Indoor unit = Indoor unit whose option switch K10 is set OFF) Priority 3: Displays t...
Page 11 - Connecting the Wired remote controller; Individual Control; Using one wired remote controller for one indoor unit.; The wired remote controller controls the indoor units,
E- 11 ENGLISH Installing the Wired remote controller (Continued) Connecting the Wired remote controller Individual Control Using one wired remote controller for one indoor unit. Outdoor unit Indoor unit COM1(F1, F2) COM2(F3, F4) COM1(F1, F2) COM2(F3, F4) COM2(F3, F4) Wired remote controller RMC:0 ...
Page 12 - Group Control - indoor units only; Using one wired remote controller for a group of indoor units.; communication cable, in group regardless of the RMC address.
E- 12 Installing the Wired remote controller (Continued) RMC:2 Group Control - indoor units only Using one wired remote controller for a group of indoor units. Group control of 3 indoor units with one wired remote controller Outdoor unit Indoor unit COM1(F1, F2) COM1(F1, F2) Wired remote controlle...
Page 13 - Using 2 wired remote controllers-indoor units only
E- 13 ENGLISH Installing the Wired remote controller (Continued) Using 2 wired remote controllers-indoor units only 2 wired remote controllers can be used to control a single indoor unit or a group of indoor units. Using 1 MWR-WH02 and 1 MWR-WE00 - Indoor unit and ERV together 1 SW1 SW2 SW3 SW4 SW5 ...
Page 14 - Additional Functions; Service Mode; Menu
E- 14 Additional Functions Service Mode The wired remote controller supports the following service modes. Menu Description Checking and Setting the Indoor Unit Option CodeChecking and Setting the Indoor Unit Main/Group AddressChecking the Indoor Unit Cycle DataChecking and Setting the Indoor Tempe...
Page 15 - Checking and Setting the Indoor Unit Option; and
E- 15 ENGLISH Additional Functions Checking and Setting the Indoor Unit Option Code In order to check and set the indoor unit option code usingthe wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button to enter the indoor unit opt...
Page 16 - In order to check and set the indoor unit Main/Group Address
E- 16 Additional Functions (Continued) Checking and Setting the Indoor Unit Main/ Group Address In order to check and set the indoor unit Main/Group Address using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button and the ...
Page 17 - Checking the Indoor Unit Cycle Data
E- 17 ENGLISH Additional Functions (Continued) Checking the Indoor Unit Cycle Data In order to check the indoor unit cycle data using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button twice and the menu will display . 2 P...
Page 18 - In order to check and set the indoor temperature compensation; The compensation value will be maintained even after
E- 18 Additional Functions (Continued) Checking and Setting the Indoor Temperature Compensation for the Wired remote controller In order to check and set the indoor temperature compensation using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will d...
Page 19 - Checking the RPM Compensation; In order to check the RPM compensation using the wired
E- 19 ENGLISH Additional Functions (Continued) Checking the RPM Compensation In order to check the RPM compensation using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button. The curre...
Page 20 - Checking the EEV Step for the Stopped Indoor; In order to check EEV step when the indoor unit is off during
E- 20 Additional Functions (Continued) Menu No. Set value Checking the EEV Step for the Stopped Indoor Unit during the Heating Mode In order to check EEV step when the indoor unit is off during heating mode using the wired remote controller, hold down the and buttons at the same time for 5 seconds. ...
Page 21 - Checking the Filter Time Setting; In order to check the filter time setting using the wired remote
E- 21 ENGLISH Additional Functions (Continued) Checking the Filter Time Setting In order to check the filter time setting using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. Th...
Page 22 - Checking the Temperature Compensation; In order to check the temperature compensation value under
E- 22 Additional Functions (Continued) Menu No. Set value Checking the Temperature Compensation Value under the Heating Mode In order to check the temperature compensation value under heating mode using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu...
Page 23 - Checking the Centralized Control Usage; In order to check the centralized control usage using the wired
E- 23 ENGLISH Additional Functions (Continued) Checking the Centralized Control Usage In order to check the centralized control usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the...
Page 24 - Checking the Drain Pump Usage; In order to check the drain pump usage using the wired remote
E- 24 Additional Functions (Continued) Menu No. Set value Checking the Drain Pump Usage In order to check the drain pump usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button...
Page 25 - Checking the Electric Heater Usage; In order to check the electric heater usage using the wired
E- 25 ENGLISH Additional Functions (Continued) Checking the Electric Heater Usage In order to check the electric heater usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button....
Page 26 - Checking the Water Coil Usage; In order to check the water coil usage using the wired remote
E- 26 Additional Functions (Continued) Menu No. Set value Checking the Water Coil Usage In order to check the water coil usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display .Press the button until is displayed. 2 Press the button...
Page 27 - Checking the External Control Usage; In order to check the external control usage using the wired
E- 27 ENGLISH Additional Functions (Continued) Menu No. Set value Checking the External Control Usage In order to check the external control usage using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displaye...
Page 28 - In order to check the connected indoor unit/ERV quantity using
E- 28 Additional Functions (Continued) Checking the Connected Indoor Unit/ERV Quantity In order to check the connected indoor unit/ERV quantity using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. ...
Page 29 - Checking the Wired remote controller PCB; In order to check the DIP switch settings using the wired remote
E- 29 ENGLISH Additional Functions (Continued) Checking the Wired remote controller PCB Settings In order to check the DIP switch settings using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Pre...
Page 30 - In order to check the wired remote controller software version
E- 30 Checking the Wired remote controller Software Version In order to check the wired remote controller software version using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. W...
Page 31 - Checking and Setting the Fresh Duct; In order to check and set the Fresh Duct discharge temperature; Fresh Duct discharge temperature will not be applied if
E- 31 ENGLISH Checking and Setting the Fresh Duct discharge temperature In order to check and set the Fresh Duct discharge temperature using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press t...
Page 32 - In order to check and set the indoor unit DIP option code using; Indoor unit DIP option code will not be applied if you
E- 32 Checking and Setting an indoor unit DIP option code In order to check and set the indoor unit DIP option code using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The curr...
Page 33 - Checking the update version of a wired; In order to check the update version of a wired remote
E- 33 ENGLISH Checking the update version of a wired remote controller program In order to check the update version of a wired remote controller program, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The u...
Page 34 - Checking the status of Automatic ESP setting; In order to check the status of Automatic ESP setting by using
E- 34 Checking the status of Automatic ESP setting In order to check the status of Automatic ESP setting by using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The status of Au...
Page 35 - Setting Automatic ESP Operation and Voltage; In order to set Automatic Air-Volume operation by using the
E- 35 ENGLISH Setting Automatic ESP Operation and Voltage In order to set Automatic Air-Volume operation by using the wired remote controller, hold down the and buttons at the same time for 5 seconds. 1 The menu will display . Press the button until is displayed. 2 Press the button. The current Auto...
Page 37 - MEMO
Page 39 - Wired Remote Control; Air Conditioner; installation manual; imagine
Wired Remote Control MWR-WH02 Air Conditioner installation manual imagine the possibilities Thank you for purchasing this Samsung product. IT FR ES EN PT EL DB98-33322A-03 AR RU DE
