Samsung MWR-VH12N - Manuals

FOR OPERATION CAUTION Do not allow water to enter the product. f This may result in fire or electric shock. Do not operate the appliance with wet hands. f This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance. f As well as being harmf...

Name of each part Display ① ⑨ ② ③ ⑥ ⑤ ⑦ ⑧ ④ Classification Indication Function ① Displays operation mode ② Displays set time ③ Displays Away mode ④ Displays filter cleaning alarm ⑤ Displays fan speed ⑥ Displays SPI (Optional) ⑦ Displays CO 2 sensor (Optional) ⑧ Displays inspection, invalid, and lock...

Name of each part Buttons ① ② ③ ④ ⑤ ⑥ ⑦ Classification Button Function ① Power button Turns on or off the wired remote controller. ② Mode button Selects the mode you want to operate ③ Schedule button Sets the timer function. ④ Set/Cancel button Completes the timer function/Cancels the timer function...

Basic operation of ERV Press the Mode button to operate the basic operation. Heat-EX mode Collects cooling or heating energy generated by the indoor cooling or heating operation to reduce the energy loss during ventilation. By-Pass mode Intakes outdoor air directly into the indoor room. Auto mode In...

On timer function When the ERV is turned off 1. Press the Timer button to set On time. f When you press the Timer button one time, set time blinks. f You can set the time in half hour unit from 30 minutes ~ 3 hours and hour unit from 3~24 hours with the ( ) and ( ) button. 2. Press the Set button to...

Delayed On timer function When the ERV is turned off 1. Press the Timer button to set delayed On time. f When you press the Timer button one time, set time blinks. f You can set the time in minute unit from 30 minutes to 1 hour with the ( ) and ( ) button. 2. Press the Set button to complete the set...

Delayed Off timer function When the ERV is turned on 1. Press the Timer button to set delayed Off time. f When you press the Timer button one time, set time blinks. f You can set the time in minute unit from 30 minutes to 1 hour with the ( ) and ( ) button. 2. Press the Set button to complete the se...

1. Press the or buttons at the same time for more than 3 seconds. f When main menu is displayed, press the or button to select no.1. 2. Press the Away button to select the number you will set on the sub menu. f Press the or button to select no.1 3. Press the Away button to enter the data setting sta...

ENGLISH-6 Installing the ERV wired remote controller Installation procedure 1. Push up the bottom part of the ERV wired remote controller's front cover to disassemble the front cover from the mounting plate. ū ERV wired remote controller can be opened in the sliding way . (Hold the front cover and t...

ENGLISH-7 02 INST ALLATION • When installing the ERV wired remote controller by using a wire longer than 10 m, you must install the communication wire of the ERV wired remote controller and the AC power cable separately . (Electrical interference can cause your ERV wired remote controller to malfunc...

ENGLISH-8 Installing the ERV wired remote controller Tracking ERVs from the ERV wired remote controller Displays the total number of units searched Displays tracking function 1. Tracking of your ERV wired remote controller automatically starts when you turn on the power after installation. 2. If you...

ENGLISH-9 02 INST ALLATION Individual control with your ERV wired remote controller When a upper controller is not connected Individual control means that you are using one ERV wired remote controller to control one ERV . ERV COM2(F3, F4) COM2(F3, F4) COM2(F3, F4) ERV wired remote controller ERV wir...

ENGLISH-10 Installing the ERV wired remote controller Group control with your ERV wired remote controller Group control means that you are using one ERV wired remote controller to control two or more ERVs at the same time . 1. Using one ERV wired remote controller to control three ERVs. ERV wired re...

ENGLISH-11 02 INST ALLATION Controlling 2-Remote controller 2-Remote controller means controlling one ERV or one group of ERVs with two remote controllers . ERV ERV wired remote controller (Master) COM2(F3, F4) ERV wired remote controller (Slave) • For the setting of slave ERV wired remote controlle...

ENGLISH-12 Installing the ERV wired remote controller Initializing the ERV wired remote controller communication ERV wired remote controller must be initialized if installation status changes .When the number of ERVs/indoor units or their address is changed Press the Fan speed and buttons at the sam...

ENGLISH-13 02 INST ALLATION Errors displayed on the ERV wired remote controller Error codes for the ERV wired remote controller or the products connected to the ERV wired remote controller are displayed on the LCD display . LCD Display When an error occurs in indoor/outdoor units (Product group disp...

ENGLISH-14 Installing the ERV wired remote controller Error codes of ERV wired remote controller Indication Description • Tracking between ERV wired remote controller and ERV is not completed within 3 minutes . • Indoor unit is not installed when external interlock function is executed .• The maximu...

ENGLISH-15 02 INST ALLATION Using installation/service mode of ERV wired remote controller Additional functions of ERV wired remote controller SEG used Main menu Exit Set, Cancel Up and down Left and right Sub menu 1 2 1. If you want to use the various additional functions for the ERV wired remote c...

ENGLISH-16 Using installation/service mode of ERV wired remote controller Installation/service setting mode • If communication initialization is needed after the setting, the system resets automatically and communication is initialized . Note Main menu Sub menu Function Factory setting Page number R...

ENGLISH-18 Using installation/service mode of ERV wired remote controller 1)* The total option codes are 24 digits . You can set six digits at a time and it is distinguished by page number . Press the Timer button to go to the next page . • Options can be set from SEG1 to SEG24 ū SEG1, SEG7, SEG13, ...

ENGLISH-20 Using installation/service mode of ERV wired remote controller The example of setting ERV wired remote controller options 1. Press the Mode and buttons at the same time for more than 3 seconds. f f When main menu is displayed, press the or button to select no .5 . 2. Press the Away button...

ENGLISH-21 02 INST ALLATION Memo ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 21 2016-12-23 오후 6:02:57