Samsung MWR-VH12N - User Manual

Page 2 - Contents

Contents Preparation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Basic function Name of each part . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 3 - Safety Precautions; WARNING; severe personal injury or death.; CAUTION; Hazards or unsafe practices that may result in; minor personal injury or property damage.; FOR INSTALLATION

Safety Precautions This content is intended to protect the user’s safety and prevent property damage. Please read it carefully for correct use of the product. WARNING Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazards or unsafe practices that may result i...

Page 4 - Do not bend or pull the power cord excessively.; This may result in electric shock or fire.

Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak. f This may result in electric shock or...

Page 6 - Do not allow water to enter the product.; This may result in fire or electric shock.; Do not operate the appliance with wet hands.; This may result in electric shock.; Do not press the buttons with any sharp objects.; This may result in electrical shock or part damage.; FOR CLEANING

FOR OPERATION CAUTION Do not allow water to enter the product. f This may result in fire or electric shock. Do not operate the appliance with wet hands. f This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance. f As well as being harmf...

Page 7 - Name of each part; Display

Name of each part Display ① ⑨ ② ③ ⑥ ⑤ ⑦ ⑧ ④ Classification Indication Function ① Displays operation mode ② Displays set time ③ Displays Away mode ④ Displays filter cleaning alarm ⑤ Displays fan speed ⑥ Displays SPI (Optional) ⑦ Displays CO 2 sensor (Optional) ⑧ Displays inspection, invalid, and lock...

Page 8 - Buttons

Name of each part Buttons ① ② ③ ④ ⑤ ⑥ ⑦ Classification Button Function ① Power button Turns on or off the wired remote controller. ② Mode button Selects the mode you want to operate ③ Schedule button Sets the timer function. ④ Set/Cancel button Completes the timer function/Cancels the timer function...

Page 9 - Basic operation of ERV; Auto mode

Basic operation of ERV Press the Mode button to operate the basic operation. Heat-EX mode Collects cooling or heating energy generated by the indoor cooling or heating operation to reduce the energy loss during ventilation. By-Pass mode Intakes outdoor air directly into the indoor room. Auto mode In...

Page 12 - On timer function; When the ERV is turned off; Off timer function

On timer function When the ERV is turned off 1. Press the Timer button to set On time. f When you press the Timer button one time, set time blinks. f You can set the time in half hour unit from 30 minutes ~ 3 hours and hour unit from 3~24 hours with the ( ) and ( ) button. 2. Press the Set button to...

Page 13 - Delayed On timer function

Delayed On timer function When the ERV is turned off 1. Press the Timer button to set delayed On time. f When you press the Timer button one time, set time blinks. f You can set the time in minute unit from 30 minutes to 1 hour with the ( ) and ( ) button. 2. Press the Set button to complete the set...

Page 14 - Delayed Off timer function

Delayed Off timer function When the ERV is turned on 1. Press the Timer button to set delayed Off time. f When you press the Timer button one time, set time blinks. f You can set the time in minute unit from 30 minutes to 1 hour with the ( ) and ( ) button. 2. Press the Set button to complete the se...

Page 17 - Example of locking all buttons

1. Press the or buttons at the same time for more than 3 seconds. f When main menu is displayed, press the or button to select no.1. 2. Press the Away button to select the number you will set on the sub menu. f Press the or button to select no.1 3. Press the Away button to enter the data setting sta...