Samsung MIM-F10N - User Manual

Page 2 - For installation; WARNING; CAUTION; Safety precautions

2 PREP ARA TION This installation manual explains how to install a FCU interface module that is connected to a Samsung FCU KIT. Please read this manual thoroughly before installing the product. (Please refer to appropriate installation for any optional product installation.) WARNING Hazards or unsaf...

Page 3 - For operation

3 PREP ARA TION Do not install the product in a place where flammable gas leaks or if there is possible chance of leakage. • Ɵ˵ʪθʪ̈ϑθ̈ϑ̧ͱ˙ѣθʪͱθʪуΧ̷ͱϑ̈ͱ͝࢒ Do not install the product in a place where it will be exposed to oil or vapor etc. • If the product is used in a place where it is exposed to oil...

Page 4 - FCU interface module installation; Accessories

4 INST ALLA TION FCU interface module installation Accessories Item FCU interface module DC power cable (12 V) Communication cable Case Cable tie Screw (M4) Installation Manual Shape Diagram of connection between a FCU interface module and FCU KIT 1 Fix the FCU interface module case at fixing point ...

Page 5 - Connecting FCU KIT

5 INST ALLA TION Connecting FCU KIT • Connect DC power cable connector (Blue) to CN12 of FCU KIT MAIN PBA. • Communication cable (Red) is ring type. Connect the cable to F1, F2 terminal of FCU KIT MAIN PBA. FCU interface module Connect with upper level controller 12V F1 F2 FCU KIT CAUTION • You shou...

Page 6 - Setting option switch and address switch

6 INST ALLA TION 3 Set the address of FCU interface module. • The address of each FCU interface module should be set differently. CAUTION • The cable length between the upper controller and the farthest FCU interface module should be within 1000 m. • You should switch off the power supply before ins...

Page 7 - When installing 16 FCU KITs

7 INST ALLA TION About setting the main address manually and installation condition SW4 ƊǮߞ 1 2 1 2 ON Manual address No function OFF Automatic address • Automatic address: Address of the interface module is assigned randomly. • Manual address: Address of the interface module is assigned by address ...

Page 8 - LED Display; Checking operation

8 INST ALLA TION LED Display 1 Ǯ˵ʪ͝θʪϑʪϩϩ̈͝˝ϩ˵ʪΧͱиʪθϑЇΧΧ̷цࡨϩ˵ʪAƸ̈͝ϩʪθ˙ɇʀʪ͔ͱʒЇ̷ʪӥ̷̷͝ͱϩθʪϑΧͱ͝ʒϩͱϩ˵ʪЇΧΧʪθ̷ʪЭʪ̷ʀͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝˙ͱθЇΧ to 10 minutes. Ǯ˵ʪ͝ϩ˵ʪʀͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝ӥϩ˵̷ͱиʪθ̷ʪЭʪ̷ࣔʪ࢒˝࢒ࡧɵʪϩиʪʪ͝AƸ̈͝ϩʪθ˙ɇʀʪ͔ͱʒЇ̷ʪɇ͝ʒAƸçÃƟࣕ̈ϑʒʪϩʪʀϩʪʒɇϑЭɇ̷̈ʒ communication, Y-GRN LED will blink. (Please wait until the comm...

Page 9 - Notes on interface module installation

9 INST ALLA TION 7-SEGMENT indication 1 Ǯ˵ʪ̈̈͝͝ϩ̈ɇ̷̈ї͝˝ΧͱиʪθϑЇΧΧ̷цࡨΧθͱ˝θɇ͔ʀͱʒʪӥ̷̷ɵʪ̈͝ʒ̈ʀɇϩʪʒ࢒ • Exmaple of program code: 17 89 A3 16 2 Then tracking of FCU KIT will be on progress, and will be indicated. 3 After tracking is done, communicating address of FCU KIT will be indicated in order when the...

Page 10 - Memo

10 INST ALLA TION Memo ki]_TW]W_^hTWXptmj|G㩅᷸ὤniluUGGGXW YWYYTXXTY_GGG㝘㤸GXXa\\aW`