Samsung AM056FBFDEH/EU - Manuals

06 safety information FOR POWER SUPPLY CAUTION When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the circuit breaker. • Failing to do so may result in electric shock or fire. FOR USING WARNING If the appliance is flooded, please contac...

07 ENGLISH Do not touch the circuit breaker with wet hands. • This may result in electric shock. Do not turn the air conditioner off with the circuit breaker while it is operating. • Turning the air conditioner off and then on again with the circuit breaker may cause a spark and result in electric s...

08 safety information If any foreign substance such as water has entered the appliance, cut-off the power supply and contact the nearest service centre. • Failing to do so may result in electric shock or fire. Do not attempt to repair, disassemble, or modify the appliance yourself. • Do not use any ...

09 ENGLISH Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. • This may result in electric shock, fire, problems with the product, or injury. Do not operate the appliance with wet han...

10 safety information For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a sa...

11 ENGLISH contents Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB c...

12 viewing your air conditioner Congratulations on the purchase of the air conditioner. We hope you enjoy the features of your air conditioner and stay cool or warm with optimal efficiency. Please read the user manual to get started and to make the best use of the air conditioner. Floor standing uni...

13 ENGLISH using your air conditioner Tips on using your air conditioner Here are some tips that you would follow when using your air conditioner. TOPIC RECOMMENDATION Cooling • If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner ...

14 cleaning and maintaining the air conditioner Cleaning the filter Before cleaning the indoor unit, be sure to turn off the auxiliary power switch. Air filter Washable air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing. 1. Unscrew the screws (8)...

16 cleaning and maintaining the air conditioner maintaining your air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and turn ...

17 ENGLISH Internal protections via the unit control system This internal protection operates if an internal fault occurs in the air conditioner. Type Description Against cold air The internal fan will be off to against cold air when the heat pump is heating. de-ice cycle The internal fan will be of...

18 appendix Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not operate immediately after it has been restarted. • Because of the protective mechanism, the appliance does n...

19 ENGLISH Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. MODE OPERATIONAL TEMPERATURE INDOOR HUMIDITY IF OUT OF CONDITIONS INDOOR OUTDOOR COOLING 18˚C to 32˚C -5˚C to 48˚C 80% or less C...

20 Information about Refrigerant Important information: regulation regarding the refrigerant used This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere. • If the system contains 5 tCO 2 e or more of fluorinated greenhouse gases, it must be checked for leakage at l...

21 ENGLISH Installation Part Selecting the Installation Location Preparing for installation Decide the installation location, with the consideration of the following conditions, under user’s approval. Refrigerant pipe work must be done before installing the indoor unit. ▶ Place where air flow is not...

22 Connecting the Refrigerant Pipe There are two refrigerant pipes of differing diameters:  A smaller one for the liquid refrigerant.  A larger one for the gas refrigerant.  The inside of copper pipe must be clean & has no dust. The connection procedure for the refrigerant pipes varies accord...

23 ENGLISH 5. Select the insulation of the refrigerant pipe.  Insulate the gas side and liquid side pipe referring to the thickness according to the pipe size.  Indoor temperature of 30°C and humidity of 85% is the standard condition. If install in a high humidity condition, use one grade thicker ...

24 Water leakage test Pipe insulation 1. Pour water to the hole for the drain test or drain pan of the indoor unit as shown in the figure. (About 1ℓ) 2. Make sure that draining is done properly by checking end of the drain pipe. 3. If water leakage occurs, check the horizontality of the indoor unit,...

25 ENGLISH Specification of electronic wire Power supply MCCB ELB or ELCB Power cable Earth cable Communication cable Max : 242V Min : 198V XA XA, 30mmA 0.1 s 2.5mm 2 2.5mm 2 0.75~1.5mm 2 ※ Run transmission wiring between the indoor and outdoor units through a conduit to protect against external for...

26 Setting an indoor unit address and installation option Set the indoor unit address and installation option with remote controller option. Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time. You need to set twice whe...

30 Setting an indoor unit address and installation option(Continued) 1. Check whether power is supplied or not. - When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2. The panel(display) should be connected to an indoor unit to receive option. 3. Set ...

33 ENGLISH Setting an indoor unit address and installation option(Continued) (*5) This function can be applied to 4 Way Cassette and Mini 4 Way Cassette only. If the air conditioner operates the heating mode immediately after finishing the cooling mode, the condensated water in the drain pan becomes...

36 Changing a particular option Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE The option mode you want to change The tens’ digit of an option SEG you will change The unit digit of an option SEG you will change The changed value Remote Controller Display Indication and Details Indication...

37 ENGLISH Setting Main Address  The MAIN address is for communication between the indoor unit and the outdoor unit. Therefore, you must set it to operate the air conditioner properly.  You can set the MAIN address from ‘00’ to ‘99’ by mixing SW01 and SW02. The MAIN address from ‘00’ to ‘99’ shoul...

QUESTIONS OR COMMENTS? Samsung, PO Box 12987, Blackrock, Co. Dublin. IEor Euro QA Lab. Saxony Way, Yateley, Hampshire GU46 6GG, UK DB68-03677A-09 COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 ...

E- 6 Concrete Hole for anchor or plug Fixing bolt (Φ9.52 or M10) Indoor Unit installation Refrigerant pipe work must be done before installing the indoor unit. Check the product and the location where it will be installed. Check the required installation conditions. Drill a hole on a floor or a wall...

E- 7 Purging the Unit On delivery, the indoor unit is loaded with inert gas. All this gas must therefore be purged before connecting the assembly piping. To purge the inert gas, proceed as follows. To prevent dirt or foreign objects from getting into the pipes during installation, do NOT remove the ...

E- 8 Cutting/Flaring the Pipes 1 M a k e s u r e t h a t y o u p r e p a r e d t h e r e q u i r e d t o o l s . (pipe cutter, reamer, flaring tool and pipe holder) 2 If you want to shorten the pipe, cut it using a pipe cutter ensuring that the cut edge remains at 90° with the side of the pipe. Ther...

E- 9 Performing Leak Test & Insulation No gap NBR(T13.0 or thicker) Insulation cover pipe Indoor unit Be sure to overlap the insulation Must fit tightly against body without any gap. Insulation pipe Check for leakage LEAK TEST WITH NITROGEN (before opening valves) In order to detect basic refrig...

E- 11 Drain pipe and Drain hose Installation Drain pan Internal water pipe (within the product) (Outer diameter Ø19) External water pipe (outside the product) (Outer diameter Ø19) 50cm or more Sewage 5cm or below Distance between the drain hose and the ground is too close End of the drain hose is in...

E- 12 Wiring Work  You must insulate refrigerant pipes, branch joints, distribution header and the pipe connection part.  Make sure to prevent any gap between the insulation on the bent part of the pipes.  Make sure that insulation is overlapped when fixing it. Indoor unit Fix securely without an...

E- 13 Wiring Work(Continued) 1 Before wiring work, you must turn off all power source. 2 Indoor unit power should be supplied through the breaker ( ELCB or MCCB+ELB ) separated by the outdoor power. ELCB: Earth Leakage Circuit Breaker MCCB: Molded Case Circuit Breaker ELB: Earth Leakage Breaker 3 Th...

E- 14 Specification of electronic wire Power supply MCCB ELB or ELCB Power cable Earth cable Communication cable Max : 242V Min : 198V X A X A, 30mmA 0.1 s 2.5mm 2 2.5mm 2 0.75~1.5mm 2  Run transmission wiring between the indoor and outdoor units through a con- duit to protect against external forc...

E- 15 Wiring Work (Continued) Example of Installation - Total power cable length L = 100(m), Running current of each units 1[A]- Total 10 indoor units were installed. 10[A] Indoor unit10 20[m] 10[m] 0[m] 9[A] 1[A] 100[m] Indoor unit2 Indoor unit1  Apply following equation. ∑ ( Coef×35.6×L k ×i k ) ...

E- 17 1 Prepare a compressor and the following tools. Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm) Spec MH-14 20xØ6.5(HxOD) Width 19mm 70xØ8.0(LxOD) Shape 2 As shown in the figure, peel off the shields from the rubber or wire of the power cable. - Peel off 20 mm...

E- 18 Wiring Work (Continued) 5 Wrap it with the insulation tape twice or more and position your contrac- tion tube in the middle of the insulation tape. A total of three or more layers of insulation is required.  Method 1  Method 2 Insulation tape 35 mm 6 Apply heat to the contraction tube to con...

E- 19 The procedure of option setting Step 1. Entering mode to set option 1. Remove batteries from the remote controller.2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button. 3. Check if you have entered the option setting status. Step 2. The proc...

E- 23 1. Check whether power is supplied or not. - When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2. The panel(display) should be connected to an indoor unit to receive option. 3. Set the installation option according to the installation condition...

E- 26 Option No. : 05XXXX-1XXXXX-2XXXXX-3XXXXX  05 series installation option(Detailed) Setting an indoor unit address and installation option(Continued) Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE Use of Auto Change Over for HR only in Auto mode (When setting SEG3) Standard heating ...

E- 28 Setting an indoor unit address and installation option(Continued) Changing a particular option Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE The option mode you want to change The tens’ digit of an option SEG you will change The unit digit of an option SEG you will change The chan...

E- 29 Setting an indoor unit address and installation option(Continued)  AM  FBFDEH  Series ※ The designs and shape are subject to change according to the model. 1 Before installing the indoor unit, assign an address to the indoor unit accord- ing to the air conditioning system plan. 2 The addr...

E- 30 Setting the function switch Switch No. Function ON OFF SW05 K1 - - - K2 Centralized control Do not use Use K3 RPM compensation - - K4 Drain pump - - SW06 K5 Revised room temperature in heat mode - - K6 Filter clean indicator 1000 hours 2000 hours K7 Hot water coil - - K8 Electric heater - - SW...

To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly. 1 Check the followings.  Strength of the installation site  Tightness of pipe connection to detect a gas leak  Electric wiring connections  Heat-resistant insulation of the...

E- 32 Troubleshooting  If an error occurs during the operation, an LED flickers and the operation is stopped except the LED.  If you re-operate the air conditioner, it operates normally at first, then detect an error again. Detection of errors LED Display on the receiver & display unit LED Dis...

E- 34 Memo NASA_Floor Stand_AM@@@FNFDEH@_IM_EN_03678A-05.indd 34 2016-05-09 오후 5:32:40

"AEEE Yönetmeligine Uygundur" This product is RoHS compliant NASA_Floor Stand_AM@@@FNFDEH@_IM_EN_03678A-05.indd 36 2016-05-09 오후 5:32:40