Royal Sovereign RSL2701S - Manuals

TABLE TOP LAMINATOR 7 Film Application Thickness 125mic(100~125mic) 125mic * (100~125mic) Film Application Thickness 50~100mic(50~75mic) 50~100mic * (50~75mic) Film Application Thickness 25~38mic(25~38mic) 25~38mic * (25~38mic) Run and stop the machine RUN/STOP Reverse the rollers to undo jams and c...

TABLE TOP LAMINATOR 11 LOADINg LOWER ROLL FILM 1. Repeat steps 1-5 to load the lower roll film.2. Once the upper and lower film is on the shaft, pull the film from the top and roll down to the bottom roll to make cer tain that the film is aligned properly. Then tighten the lower locking core screws....

12 LAMINATINg SINgLE SIDED (RSL-2701S USA Model only) Press the switch into the location “SINGLE ”. Figure 13

TABLE TOP LAMINATOR 13 9. MAINTENANCE 1. Do not apply any cleaning fluids to the rollers cer tain fluids may cause damage.2. Do not clean rollers with sharp or pointed objects.3. Use a crepe rubber cleaning block to remove adhesive from rollers. Works best when rollers are hot.4. Use a damp cloth wi...

14 10.TROUBLE ShOOTINg gUIDE Symptom Cause possible Solution Rollers do not operate after the RUN/ STOP button is pressed 1.Safety cover is opened 2. Power cord is not plugged in 3. Front table is not on properly 4. Machine is not turned on 1. Check safety cover is properlyclosed 2. Plug in the powe...

TABLE TOP LAMINATOR 15 11. SpECIFICATIONS MODEL RSL-2701U RSL-2701S RSL-2701 RSL-2701S RSL-380S Power supply AC120V 60Hz AC100V 60Hz AC220~240V 50/60Hz AC 220~240V 50/60Hz Power consunmption 1450W 1500W Max laminating width 685mm 380mm Film thickness 25~250mic /1~10mil 25~125mic/1~5mil Max laminatin...