Rangemaster RMG1H60SG - Manuals

Page 2 - EN

EN 2 2 Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ......................................................................................................................3 CHARACTERISTICS ......................................................................................................

Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION

EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting...

Page 4 - CHARACTERISTICS; Dimensions

Page 6 - Wall drilling and bracket fixing; centre of the area in which the hood will be installed.

EN 6 6 INSTALLATION Wall drilling and bracket fixing 7.2.1 11 12a X 116 1÷2 116 1040 450 mm min Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 1040 mm a...

Page 7 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM

EN 7 7 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a. • Fully tighten support screws 12a. • Adjust screws Vr to level the hood body. 12a Vr Connections DUCTED VERSION AIR EXHAUST...

Page 8 - ELECTRICAL CONNECTION; Flue assembly

EN 8 8 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...

Page 9 - USE; Control board

EN 9 9 USE B A D C E G F I H L Control board Key Function Display A Switches the extractor motor on and off at the latest selected speed Indicates the selected speed. B Decreases the suction speed. The number of lit LEDS decreases. C Increases the suction speed. The number of lit LEDS increases. D B...

Page 10 - MAINTENANCE; Cleaning the Comfort Panels; • Clean the inside as well using a damp cloth and neutral deter-

EN 10 10 MAINTENANCE REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. Cl...

Page 11 - Metal grease filters; • Wash the filters. Pay attention not to bend them.

EN 11 11 Metal grease filters Metal filters can be washed also in a dish machine. They need to be washed every time a drop-symbol ap-pears in the display or at least every two months. In ca-se of very frequent use these have to be washed even more often. Alarm reset • Press the G-key for at least 2 ...

Page 12 - SUBSTITUTION OF THE CHARCOAL FILTER; Lighting; LIGHT REPLACEMENT; out of from the Hood.

EN 12 12 Charcoal filter (recycling version) This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The filter saturation alarm has to be activated already before. Activation of the alarm signal • In the recycling version h...

Page 16 - AGA RANGEMASTER LTD.