Rangemaster RMG1H60SG – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Table of Contents:
Page 2 – EN
Page 3 – RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION
Page 4 – CHARACTERISTICS; Dimensions
Page 6 – Wall drilling and bracket fixing; centre of the area in which the hood will be installed.
Page 7 – Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
Page 8 – ELECTRICAL CONNECTION; Flue assembly
Page 9 – USE; Control board
Page 10 – MAINTENANCE; Cleaning the Comfort Panels; • Clean the inside as well using a damp cloth and neutral deter-
Page 11 – Metal grease filters; • Wash the filters. Pay attention not to bend them.
Page 12 – SUBSTITUTION OF THE CHARCOAL FILTER; Lighting; LIGHT REPLACEMENT; out of from the Hood.
Page 16 – AGA RANGEMASTER LTD.
Loading the manual
RMG1H60SG RMG1H90SG
Instructions Manual
w w w . r a n g e m a s t e r . c o . u k
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - EN
EN 2 2 Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ......................................................................................................................3 CHARACTERISTICS ......................................................................................................
Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting...
Page 4 - CHARACTERISTICS; Dimensions
Page 6 - Wall drilling and bracket fixing; centre of the area in which the hood will be installed.
EN 6 6 INSTALLATION Wall drilling and bracket fixing 7.2.1 11 12a X 116 1÷2 116 1040 450 mm min Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 1040 mm a...
Page 7 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
EN 7 7 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a. • Fully tighten support screws 12a. • Adjust screws Vr to level the hood body. 12a Vr Connections DUCTED VERSION AIR EXHAUST...
Page 8 - ELECTRICAL CONNECTION; Flue assembly
EN 8 8 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...
Page 9 - USE; Control board
EN 9 9 USE B A D C E G F I H L Control board Key Function Display A Switches the extractor motor on and off at the latest selected speed Indicates the selected speed. B Decreases the suction speed. The number of lit LEDS decreases. C Increases the suction speed. The number of lit LEDS increases. D B...
Page 10 - MAINTENANCE; Cleaning the Comfort Panels; • Clean the inside as well using a damp cloth and neutral deter-
EN 10 10 MAINTENANCE REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. Cl...
Page 11 - Metal grease filters; • Wash the filters. Pay attention not to bend them.
EN 11 11 Metal grease filters Metal filters can be washed also in a dish machine. They need to be washed every time a drop-symbol ap-pears in the display or at least every two months. In ca-se of very frequent use these have to be washed even more often. Alarm reset • Press the G-key for at least 2 ...
Page 12 - SUBSTITUTION OF THE CHARCOAL FILTER; Lighting; LIGHT REPLACEMENT; out of from the Hood.
EN 12 12 Charcoal filter (recycling version) This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The filter saturation alarm has to be activated already before. Activation of the alarm signal • In the recycling version h...
