Rangemaster RI60 - Manuals - manualsarea.com

Page 2 - Contents

Contents Before You Start... 1 Hob Overview 3 Cleaning Your Hob 8 Troubleshooting 9 Installation 10 Circuit Diagram 13 Technical Data 14 Warranty/After Sales Service 15

Page 3 - Installation and Maintenance; Ventilation; The functions of this hob

1 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used an induction hob before. This appliance is designed ...

Page 4 - Hob Care; DO NOT use the hob surface as a cutting board.; Cleaning

2 Hob Care DO NOT use the hob surface as a cutting board. DO NOT leave utensils, foodstuﬀs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans containing oil). DO NOT place plastic or aluminium foil, or plastic containers, on the hob. DO NOT leave the hob zones switch...

Page 5 - The Hob

3 ArtNo.314-0002 60 induction hob ELECTRONIC CONTROL INDUCTION �� 2. Hob Overview The induction hob comprises of four cooking zones containing induction elements wit...

Page 6 - ] will appear on the hob; Residual Heat Indicator, ‘H’

4 Pan Detector, ArtNo.030-0007 Induction symbols If a cooking area is switched on and there is no pan in place or if the pan is too small for the cooking area, then no heat will be generated. The symbol [ ArtNo.030-0007 Induction symbols ] will appear on the hob control display; this is the “pan-mis...

Page 7 - Preheat Function

5 Note: The ‘+’ keys have a repeat function: holding the key pressed down will increase the power setting by one level every 0.3 seconds. To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required (Fig.2-...

Page 8 - Timer Function; Zone Timer; Minute Timer

6 Timer Function The timer has two settings: • Zone timer • Minute timer Zone Timer This allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn oﬀ automatically. Activating the timer: Select the required cookin...

Page 9 - Child Lock Function; The child lock functions (activating and; Automatic Shutdown

7 Turning oﬀ the timer alarm: At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. Deactivating the timer: Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will go out. Chil...

Page 10 - Cleaning Burned-on Spills; To Remove Metal Rub-off; Essential Information; Use an oven glove to protect your hand from; Cleaning Your Hob

8 Cleaning Burned-on Spills Make sure that the residual heat indicators are oﬀ and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape oﬀ the burned-on matter (Fig.3-1). Once you have ...

Page 12 - Dear Installer; Provision of Ventilation; Checking the parts; Installation

10 INSTALLATION Check the appliance is electrically safe when you have ﬁnished. Dear Installer Before you start your installation, please complete the details BELOW. Should your customer have a problem relating to your installation they will be able to contact you easily. Safety Requirements The hob...

Page 13 - Positioning the Hob

11 INSTALLATION Check the appliance is electrically safe when you have ﬁnished. Positioning the Hob The hob should be ﬁtted into a work surface, which is at least 600mm deep. In position, the hob has a maximum thickness of 5mm from the top of the work surface, and an overall thickness of 45mm (65mm ...

Page 14 - Customer Care

12 INSTALLATION Check the appliance is electrically safe when you have ﬁnished. Secure the hob to the worktop using the brackets supplied. The positioning of the bracket (and sleeve) is dependent on the thickness of the worktop as shown in (Fig.5-4). Note: Slide the optional sleeve onto the bracket ...

Page 16 - Dimensions; Connections

14 7. Technical Data INSTALLER: Please leave these instructions with the user.DATA BADGE LOCATION: Base of the hob.COUNTRY OF DESTINATION: GB/IE Dimensions Overall height Above worktop: 5mm Below worktop: 41mm Overall width 580mm; see ‘Positioning of the Hob’ Overall depth 510mm Space for ﬁxing See ...