Polycom XS-3900 - Manuals - manualsarea.com

Page 2 - Trademark Information

Configuration Guide 2 PN: 1725-36061-001_C.doc Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property...

Page 3 - Introduction; Certified Product Summary; Service Information

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Xirrus Wi-Fi Array infrastructur...

Page 4 - Known Limitations

Configuration Guide 4 PN: 1725-36061-001_C.doc Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polyco

Page 5 - Network Topology

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 5 Network Topology The following topology was used for VIEW Certification testing.

Page 6 - Configuration Settings; Disabling the monitor radio

Configuration Guide 6 PN: 1725-36061-001_C.doc Configuration Settings Xirrus Arrays initially boot with all radios disabled except for the monitor radio. The monitor radio may be left enabled and in no way interferes with the SpectraLink Wireless Telephones; however it was disabled for the certifica...

Page 8 - Setting Radio Channels

Configuration Guide 8 PN: 1725-36061-001_C.doc Setting Radio Channels With the SpectraLink Wireless Telephones operating in 802.11b mode, at least one of the Wireless LAN Array’s Integrated Access Points (IAPs) must be set to the 2.4 GHz band. Any of the Array’s four abg radios may be used, and up t...

Page 9 - Configuring an SSID

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 9 Configuring an SSID An SSID for the phones must be set on the Array. The following CLI commands show how to implement an SSID called ‘spec’. Xirrus_WLAN_Array(config)# ssid Xirrus_WLAN_Array(config-ssid)# add spec Xirrus_WLAN_Array(con...

Page 11 - Setting Radio Cell Size

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 11 Setting Radio Cell Size The radio transmit powers and receive sensitivities should be set appropriately for the environment in which they are operating. The simplest way to do this is to pick an operating cell size for them. The follo...

Page 13 - Security

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 13 Security Enabling WPA-PSK For WPA-PSK mode, the global encryption cipher method must be set to TKIP with the following CLI commands: Xirrus_WLAN_Array(config)# security Xirrus_WLAN_Array(config-security)# wpa tkip on Xirrus_WLAN_Array...

Page 15 - Setting the Pre-Shared Key

Xirrus Wi-Fi Array: XS-3500/3700/3900 PN: 1725-36061-001_C.doc 15 Setting the Pre-Shared Key The pre-shared key must be provided next. In the example below the passphrase is set to ‘11111111’. The passphrase is an attribute of the SSID and is set with the following CLI commands: Xirrus_WLAN_Array(co...