Polycom VP010 - Manuals

Polycom VP010 – Manual in PDF format online.

Manuals:

Manual

Manual Polycom VP010

Summary

Page 3 - About This Guide; Polycom Model Numbers

PN: 1725-36031-001_H.doc 3 About This Guide This document explains how to configure and maintain one or more SpectraLink 8000 SVP Servers (models SVP100, SVP020, SVP010) within IP telephony environments. Polycom Model Numbers This document covers the following registered model number: SVP100 Related...

Page 5 - Contents

PN: 1725-36031-001_H.doc 5 Contents 0 About This Guide ...................................................................... 3 Polycom Model Numbers ..................................................................3 Related Documents ...................................................................

Page 10 - SVP Server Models; The Timing Function

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 10 SVP Server Models The SVP Server is available in three models. Which model is selected for your facility depends on current and expected capacity. All SVP Servers within a subnet must be the same model ...

Page 11 - Multiple SVP Server Capacities; SpectraLink SVP010 and SVP020 Server capacity; SpectraLink SVP100 Server Capacity

SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 11 address. The wireless telephones and the other SVP Servers locate the master by using a static IP address, DHCP, or DNS. The master SVP Server performs important coordinating functions. The loss of a non-master SVP Server does not sign...

Page 13 - Notes on System Configuration

SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 13 Notes on System Configuration In an IP system using subnets to differentiate telephony areas, each subnet must have its own APs. Each subnet may require an SVP Server to maintain voice quality, but this depends on traffic volume and ro...

Page 14 - System Diagram

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 14 System Diagram The following diagram shows multiple SVP Servers residing on a network with an IP telephony gateway and IP telephony server, wireless LAN APs, and Ethernet switch: (IP telephony system ex...

Page 15 - System Components; Access points

SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 15 System Components SpectraLink e340/h340/i640 and 8020/8030 Wireless Telephones Employees can carry wireless telephones to make and receive calls as they move throughout the building. The wireless telephones are to be used on-premises; ...

Page 17 - The Front Panel of the SVP Server

SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 17 The Front Panel of the SVP Server The SVP Server’s front panel contains ports to connect to power, the LAN, and to an administrative computer via an RS-232 port. Status LEDs supply information about the SVP Server’s functioning. RS-232...

Page 19 - Required Materials

PN: 1725-36031-001_H.doc 19 Installing the SpectraLink 8000 SVP Server As shown in the system diagram, the SVP Server is connected to the Ethernet switch. The specifications covered here allow for great flexibility in physical placement of the components within stated guidelines. See the Configurati...

Page 20 - Locate the SVP Server; Install the SVP Server; Mount the SVP Server on a rack

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 20 Locate the SVP Server The SVP Server measures approximately 4 x 12.5 x 7 inches, and weighs about five pounds. The unit can be wall- mounted, vertically or horizontally, over ¾" plywood. The SVP Ser...

Page 21 - Mount the SVP Server to a wall

Installing the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 21 Mount the SVP Server to a wall The SVP Server can be mounted either horizontally or vertically. To mount the SVP Server to a wall: 1. Using a 1/8-inch drill bit, drill four pilot holes, on 1.84-inch by 12.1-inch centers (approxim...

Page 22 - Connect SVP Server to LAN; Connect power

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 22 Connect SVP Server to LAN Using a Cat. 5 cable, connect the NETWORK port on the SVP Server to the connecting port on the Ethernet switch. Connect power 1. Once the units have been properly grounded, con...

Page 23 - Connecting to the SVP Server; Connect via the serial port

PN: 1725-36031-001_H.doc 23 Configuring the SpectraLink 8000 SVP Server During initial setup of the SVP Server the IP address is established and the maximum number of active calls per AP is set. Optionally, you may enter a hostname and a location for software updates via TFTP. Connecting to the SVP ...

Page 24 - Connecting via telnet; The NetLink SVP-II System Menu; System Status

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 24 Connecting via telnet Telnet can only be used after the SVP Server’s IP address is configured. The telnet method of connection is used for routine maintenance of the SpectraLink Server for both local an...

Page 25 - SVP-II Configuration

Configuring the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 25 SVP-II Configuration Allows you to set the mode and reset the system. Network Configuration Allows you to set network configuration options, including IP address and hostname. Change Password Allows you to change the password fo...

Page 27 - IP Address; Hostname

Configuring the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 27 To change the IP address of the master SVP Server, change it in this menu and reboot the system. Then you may change alias IP addresses in each of the other SVP Servers without error. The following options must be configured: IP...

Page 29 - SVP Server Configuration

Configuring the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 29 selecting the Reset option in the SVP-II Configuration screen and then pressing Y upon exit. SVP Server Configuration The SVP-II Configuration screen is where you set the mode of the SVP Server. It is also where you can lock the...

Page 30 - Phones per Access Point

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 30 SVP-II Mode Defaults to NetLink IP for an IP environment. Press Enter to select and the screen is immediately redrawn with additional options for the IP environment. The following options must be config...

Page 31 - First Alias IP Address/Last Alias IP Address

Configuring the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 31 SVP-II Master The master SVP Server must be identified in an IP system. Select one of the following identification options: • Statically configure the IP address of the master SVP Server in each of the SVP Servers. Enter the IP ...

Page 32 - Enable H.323 Gatekeeper; Ethernet Link

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 32 Alias IP Addresses are not necessary in Cisco systems. Enable H.323 Gatekeeper This option is no longer used. Ethernet Link The SVP Server will auto-negotiate unless there is a need to specify a link sp...

Page 33 - QoS Configuration; Reset System

Configuring the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 33 QoS Configuration Select this option to set the DSCP tags. See QoS Configuration section below. Reset System If this option is selected, you will be prompted to reset the SVP Server upon exiting this screen. Reset All SVP Server...

Page 34 - DSCP Tag

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 34 QoS Configuration DSCP tags set packet priorities for QoS. DSCP Tag DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative priorities. Packets are tagged with a DSCP field in ...

Page 38 - Changing the Master SVP Server

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 38 Changing the Master SVP Server In the event the master SVP Server loses communication with the network, the wireless telephone system will fail. All SVP Servers will lock, all calls will be lost, and no...

Page 39 - Software Updates

PN: 1725-36031-001_H.doc 39 Software Maintenance The SVP Server uses proprietary software programs written and maintained by Polycom Corporation. The software versions that are running on the system components can be displayed via the System Status screen. You may obtain information about software u...

Page 41 - Error Status; Network Status

PN: 1725-36031-001_H.doc 41 Troubleshooting via System Status Menu Information about system alarms, and network status displays on various screens accessed through the System Status Menu screen, which is opened from the main menu of the SVP Server. See the previous sections for directions on how to ...

Page 49 - Safety Notices

PN: 1725-36031-001_H.doc 49 Safety Notices WARNING: Changes or modifications to this equipment not approved by SpectraLink Corporation may cause this equipment to not comply with part 15 of the FCC rules and void the user’s authority to operate this equipment. WARNING: SpectraLink products contain n...

Page 51 - Index

PN: 1725-36031-001_H.doc 51 Index A Access point, description .....................................15 Alarms ....................................................................42 C Configuration Initial setup .......................................................26 Customer Support ..................