Polycom MX392 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents TABLE OF CONTENTS ......................................................................................................................... 2 SHURE MX392 BASICS ....................................................................................................................... 3...

Page 4 - Push to Talk, Release to Mute; LED on when microphone is active.

Switch Behavior User Action Required / LED Behavior DIP Switch Settings Push to Mute, Release to Talk (As Shipped) Press and hold switch to temporarily mute microphone; release switch to unmute. LED on when microphone is active. S1 = OFF S2 = OFF S3 = OFF S4 = OFF Push to Talk, Release to Mute Press...

Page 8 - EFAULT; Go to the Logic Input page of Conference Composer; . If the SWITCH OUT wire is connected to

T OGGLE O PERATION (P USH TO T ALK ) Let's say that you want MX392 to be muted by default. If someone pushes the membrane switch, you want the microphone to stay unmuted until the user presses the switch to mute the microphone. You also want the LED to illuminate when the microphone is unmuted. Firs...

Page 15 - Next, right click in the A

Repeat the above process for each MX392 microphone that you want to connect to the Vortex Device. L OGIC O UTPUT Go to the Logic Output page of Conference Composer. If the LED IN wire is connected to Logic Output pin 1, then you need to assign Pin 1 by left-clicking the desired pin in the DB-25 grap...

Page 16 - Next, right click in the D; column for Logic Input 1 and select I; Here is what the screen should look like when you are finished:

Next, right click in the D EACTIVATED C OMMAND column for Logic Input 1 and select I NSERT , I NPUT , 1, M UTE , O N . Now, whenever the microphone is muted (Mute = True), the LED will not illuminate on the MX392. Here is what the screen should look like when you are finished: Make sure the LED work...

Page 18 - Go to the M; Likewise, here is the Macros page for the Vortex EF2241:

M ACROS Go to the M ACROS page of Conference Composer. To make things easy, label Macro 0 as MUTE ON and label Macro 1 as MUTE OFF. Then, for each microphone that is physically connected to the Vortex, add commands to Macro 0 that mute the microphones and add commands to Macro 1 that unmute the micr...

Page 20 - BROADA

Repeat that same process for Inputs 2-4 of the Vortex EF2241. The, perform the same procedure to unmute Inputs 1-4 on the Vortex EF2241. Remember that there is a colon after the BROADA command. When you are finished, here is what the Macros page should look like: 20

Page 26 - Now, right click in the A

L OGIC I NPUT Go to the Logic Input page of Conference Composer. If the SWITCH OUT wire is connected to Logic Input pin 1, then you need to assign Pin 1 by left-clicking the desired pin in the DB-25 graphic and selecting the pink color (The pink color means that the pin is not grouped to other pins)...

Page 32 - Now, right click in the H; If you are successful, you should see this on the screen:

Now, right click in the H ELD C OMMAND column for Logic Input 1 and select I NSERT , I NPUT , 1, M UTE , O N . Now, as long as the switch is Active Low (0V DC), the Vortex Device will mute Input 1. If you are successful, you should see this on the screen: Make sure that the physical wiring works by ...

Page 35 - at

When the membrane switch is pushed again, the Vortex Device toggles the state from unmuted to muted. Now, the LED should not be illuminated since the input from the MX392 is now muted. Both LED's (Conference Composer and MX392) should not be illuminated: M OMENTARY O PERATION M UTE A LL E XAMPLE t's...

Page 36 - o to the M; d label M

o to the M ACROS Gan page of Conference Composer. To make things easy, label Macro 0 as MUTE ON acro 1 d label M as MUTE OFF. Then, for each microphone that is physically connected to the Vortex, add commands to Macro 0 that mute the microphones and add commands to Macro 1 that unmute the microphone...

Page 44 - Polycom Installed Voice Business Group Contact Information; Copyright

T ECHNICAL S UPPORT For support on the Vortex product line, call toll-free (USA/Canada) 888-248-4143, then select option 1, then option 3. For exclusive Integrator and Consultant focused support (through our PASS program), dial 1.408.474.2048; this number will get you help on video and Vortex produc...