Polycom A6000 - Manuals

Polycom A6000 – Manual in PDF format online.

Manuals:

Manual

Manual Polycom A6000

Summary

Page 2 - Trademark Information

Configuration Guide PN: 1725-36080-001_J.doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property...

Page 3 - Introduction; Certified Product Summary; Customer Service

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and WLAN infrastructu...

Page 4 - Network Topology; Known Limitations

Configuration Guide PN: 1725-36080-001_J.doc 4 Network Topology It is important to note that this configuration is not necessarily applicable to all customer environments. The following topology was tested during VIEW Certification testing. Known Limitations No limitations were discovered during VIE...

Page 5 - Deployment Description; Interface setting

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 5 Deployment Description It is a SpectraLink requirement that voice users be placed on a separate VLAN (e.g., VLAN 10) and data users on a separate VLAN (e.g., VLAN 25). The voice and data VLANs reside on the Aruba mobilit...

Page 6 - Connecting to the Mobility Controller; Via console

Configuration Guide PN: 1725-36080-001_J.doc 6 Connecting to the Mobility Controller Command, comment, and screen text key In the sections below you will find commands, comments, prompts, system responses, or other screen-displayed information involved in the configuration process. This key explains...

Page 7 - Via the CLI; Via the Web interface

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 7 Via the CLI By default, only SSH (Secure Shell) access to the switch (mobility controller) is permitted. 1. From a management system that has network connectivity to the switch, connect to the switch using SSH: ssh admin...

Page 8 - Initial Setup

Configuration Guide PN: 1725-36080-001_J.doc 8 Initial Setup Before starting, please ensure that the Policy Enforcement Firewall module license is enabled on the Aruba mobility controller. Please contact Aruba Networks for licenses and installation information. On power-up, the user is presented wit...

Page 10 - Assigning an IP to the Mobility Controller

Configuration Guide PN: 1725-36080-001_J.doc 10 Assigning an IP to the Mobility Controller 1. Connect to the switch via the CLI. 2. Login with the configured username and password, admin/admin in this example. 3. Type enable at the > prompt. 4. Type the enable password, enable in this example. 5....

Page 11 - Connecting APs; Provisioning APs

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 11 Connecting APs Provisioning APs The APs need to be provisioned. The Aruba APs can be provisioned manually or be configured for automatic provisioning. For manual provisioning, use the Web-based AP provisioning Web page....

Page 12 - SSID Configuration; CLI command configuration

Configuration Guide PN: 1725-36080-001_J.doc 12 SSID Configuration CLI command configuration APs can be configured using the CLI or the Web interface. Each AP is identified by a unique location code. The APs can either be configured per location with unique settings using the AP’s unique location co...

Page 13 - Web-based configuration

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 13 Web-based configuration 1. Click the Configuration button. 2. In the navigation pane, select Network from the WLAN sub-menu. 3. To edit an existing AP profile, click the Edit button corresponding to the SSID. 4. To add ...

Page 14 - Access Point Configuration; Preamble settings; Channel and Tx power

Configuration Guide PN: 1725-36080-001_J.doc 14 Access Point Configuration Radio setting 802.11b or 802.11g When using the 802.11b/g band for the VoWiFi network, set the radio settings to 802.11b/g mixed mode. Preamble settings The tests on the Aruba system were run with the short preamble setting. ...

Page 15 - Recommended AP configuration settings

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 15 For additional details on RF deployment please see the

Page 21 - Security Policies and QoS; Create an alias for the SVP Server

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 21 Security Policies and QoS Once the basic infrastructure is configured, it is necessary to configure the security policies to ensure that the data network and the voice network are secured and access to these networks is...

Page 22 - Create policies for the wireless telephone user

Configuration Guide PN: 1725-36080-001_J.doc 22 Create policies for the wireless telephone user The policies shown in the above example can be configured using the Web interface as follows:

Page 23 - Assign policies to the role

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 23 Assign policies to the role Create a role, for example phones , and assign the policies to this role. This is the role that would be assigned to the handsets when they are authenticated successfully. The Security Polici...

Page 25 - Authentication

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 25 Authentication In addition to the encryption, Aruba recommends the use of MAC authentication to authenticate the Spectralink handsets. On the Aruba System, the roles for SpectraLink Wireless Telephones are derived using...

Page 27 - Subnet Roaming

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 27 Subnet Roaming The Aruba system can be set up to support inter-switch inter-subnet roaming. The topology is as shown in the figure on page 2. When two or more switches are used in the Aruba WLAN system, one switch has t...

Page 28 - CLI Commands to Set Up Subnet Roaming; Commands for the master switch (the Aruba 800)

Configuration Guide PN: 1725-36080-001_J.doc 28 CLI Commands to Set Up Subnet Roaming Commands for the master switch (the Aruba 800) Configure terminal ip default-gateway <ip_addr of router> ap location 1.1.0 (#ap connected to 800) lms-ip <ip_addr of 800 switch> ap location 1.2.0 (#ap co...

Page 29 - CLI Commands to Verify Setup for Subnet Routing

Aruba Mobility Controllers: A200, A800, A2400, A6000 PN: 1725-36080-001_J.doc 29 It’s also necessary to set the default gateway of the SpectraLink 8000 SVP Server and SpectraLink 8000 Telephony Gateway to the IP address of the router connected to the master switch. CLI Commands to Verify Setup for S...

Page 30 - Checking the Configuration

Configuration Guide PN: 1725-36080-001_J.doc 30 Checking the Configuration Verify connectivity by pinging between the switches, the APs, and the server and gateway. The switch and AP are now ready for use with the SpectraLink Wireless Telephones. To show AP settings: show ap config location x.y.z To...