Polycom 1725-361300-001 - Manuals

Page 3 - About this Guide; SpectraLink 8000 Telephony Gateway

PN: 1725-36130-001_E.doc 3 About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our LinkPlus digital integration technology to integrate with various di...

Page 4 - Related Documents; Customer Support

LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 4 Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (172...

Page 5 - Icons and Conventions

About this Guide PN: 1725-36130-001_E.doc 5 Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware.

Page 7 - Plan the Interface; Plan Programming

PN: 1725-36130-001_E.doc 7 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the handsets are registered. Recommended programming includes assignin...

Page 9 - Assign Extension Numbers; The Wireless Telephone Display; Handset indicators

Plan the Interface PN: 1725-36130-001_E.doc 9 It will help to identify a wired set that is programmed exactly or close to the way the handsets should be programmed. This set can be duplicated to copy station parameters to the handsets. Assign Extension Numbers The wire contractor should inform the s...

Page 10 - Feature Programming Requirements; Line sequences; Function sequences

LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 10 When lines are programmed as shown on the key-map diagrams, the numeral icons on the handset display will be mapped to any deskset LEDs associated with the corresponding feature keys. The line icons will be di...

Page 11 - Function Menu Programming

Plan the Interface PN: 1725-36130-001_E.doc 11 Function Menu Programming SpectraLink 6300 MCU Note that the function menu defaults set for the handsets associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s Console. If the system uses softkeys, to minimize unwanted in...

Page 13 - Interface Implementation

PN: 1725-36130-001_E.doc 13 Interface Implementation This section describes the recommended programming to use the SpectraLink 6000 System with a DEFINITY Communications System. The procedures assume: • The DEFINITY system is installed and operational in an approved configuration. See the Telephone ...

Page 14 - DEFINITY Four-Wire Interface

LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 14 DEFINITY Four-Wire Interface The DEFINITY TN754B (any vintage) or TN754 (vintage 11 or higher) circuit pack provides eight, four-wire digital station circuits. Two of these wires are used for transmit, two are...

Page 15 - Set the Switch Interface Type

Interface Implementation PN: 1725-36130-001_E.doc 15 See the documentation for your SpectraLink components for more information about wiring the demarc block or patch panel. The following table shows the patch cord pinout for the Avaya side of the modular 8-pin (RJ45) connector. Pin Function 1 Recei...

Page 17 - Program DEFINITY; Save translations; Program Handsets; Copy settings from a wired set

Interface Implementation PN: 1725-36130-001_E.doc 17 is the sequence equivalent to pressing the corresponding softkey on the desk set. The handset function menu default settings are shown on each corresponding button in the above diagram; these may be changed as described above in Function Menu Prog...

Page 18 - Station features for handset; Assign buttons

LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 18 settings so they can be manually duplicated using an add station command for the template handset. Station features for handset Station features on Page 1 of the station form can be assigned or copied as deter...

Page 19 - Duplicate programming

Interface Implementation PN: 1725-36130-001_E.doc 19 • To make the handset ring when the wired station rings, change Bridged Call Alerting to Yes on the wired station. If the handset is not a bridged appearance of a wired station, assign buttons 1-3 as call appearances (call-appr). Duplicate program...

Page 21 - Extension Assignments Worksheet

PN: 1725-36130-001_E.doc 21 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Handset # Ext. # Name Interface Module Circuit # Comment Handset Serial # Handset 1 1 Handset 2 2 Handset 3 3 Handset 4 4 Handset 5 5 Handset 6 6 Handset 7 7 Handset 8 8 Handset 9 9 Handset 10 10 Han...