Polycom 1725-36033-001 - Manuals

Polycom 1725-36033-001 – Manual in PDF format online.

Manuals:

Manual

Manual Polycom 1725-36033-001

Summary

Page 2 - Trademark Information

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other t...

Page 3 - About This Document; Polycom Model Numbers

PN: 1725-36033-001_C.doc 3 About This Document This document explains how to configure and maintain one or more SpectraLink 8000 SVP Servers (models SVP100, SVP020, SVP010) within IP telephony environments. Polycom Model Numbers This document covers the following registered model number: SVP100 Rela...

Page 4 - Customer Support

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 4 Customer Support Polycom wants you to have a successful installation. If you have questions please contact the Customer Support Hotline at (800) 775-5330. The hotline is open Monday through Friday, 6 a.m. to 6 p.m. ...

Page 5 - Contents

PN: 1725-36033-001_C.doc 5 Contents 0 About This Document ................................................................ 3 Polycom Model Numbers ..................................................................3 Related Documents ......................................................................

Page 8 - SpectraLink 8000 SVP Server Models; The Timing Function

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 8 SpectraLink 8000 SVP Server Models The SVP Server is available in three models. Which model is selected for your facility depends on current and expected capacity. All SVP Servers within a subnet must be the same mo...

Page 9 - SVP Server availability

SpectraLink 8000 SVP Server Overview PN: 1725-36033-001_C.doc 9 telephones, and between the SVP Server and the PBX (or other far-end device). SVP Server availability A SpectraLink handset registers to a single SVP Server the first time it is powered on. Once the handset has contacted this Registrati...

Page 10 - Multiple SVP Server Capacities; SpectraLink SVP010 and SVP020 Server capacity; SpectraLink SVP100 Server capacity

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 10 Multiple SVP Server Capacities The system capacity of each SVP Server model is shown in the tables below. Note that SVP Server models may not be combined within one subnet. SpectraLink SVP010 and SVP020 Server capa...

Page 12 - Notes on System Configuration

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 12 Notes on System Configuration In an IP system using subnets to differentiate telephony areas, each subnet must have its own APs. Each subnet may require an SVP Server to maintain voice quality, but this depends on ...

Page 13 - System Diagram

SpectraLink 8000 SVP Server Overview PN: 1725-36033-001_C.doc 13 System Diagram The following diagram shows multiple SVP Servers residing on a network with an IP telephony gateway and IP telephony server, wireless LAN APs, and Ethernet switch: SpectraLink 8000 SVP Server Access point Wireless POS Sp...

Page 14 - System Components; Access points

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 14 System Components SpectraLink e340/h340/i640 and 8020/8030 Wireless Telephones Employees can carry wireless telephones to make and receive calls as they move throughout the building. The wireless telephones are to ...

Page 15 - SpectraLink 8000 SVP Server

SpectraLink 8000 SVP Server Overview PN: 1725-36033-001_C.doc 15 network traffic is restricted to those segments that are directly involved in the communication. Installation of a network router is recommended in larger networks, where there may be significant network traffic not related to the wire...

Page 16 - The Front Panel of the SVP Server

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 16 The Front Panel of the SVP Server The SVP Server’s front panel contains ports to connect to power, the LAN, and to an administrative computer via an RS-232 port. Status LEDs supply information about the SVP Server’...

Page 17 - Required Materials

PN: 1725-36033-001_C.doc 17 Installing the SpectraLink 8000 SVP Server As shown in the system diagram, the SVP Server is connected to the Ethernet switch. The specifications covered here allow for great flexibility in physical placement of the components within stated guidelines. See the Configurati...

Page 18 - Locate the SVP Server; Install the SVP Server; Mount the SVP Server on a rack

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 18 Locate the SVP Server The SVP Server measures approximately 4 x 12.5 x 7 inches, and weighs about five pounds. The unit can be wall- mounted, vertically or horizontally, over ¾" plywood. The SVP Server can also...

Page 19 - Mount the SVP Server to a wall

Installing the SpectraLink 8000 SVP Server PN: 1725-36033-001_C.doc 19 Mount the SVP Server to a wall The SVP Server can be mounted either horizontally or vertically. To mount the SVP Server to a wall: 1. Using a 1/8-inch drill bit, drill four pilot holes, on 1.84-inch by 12.1-inch centers (approxim...

Page 20 - Connect SVP Server to LAN; Connect power

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 20 Connect SVP Server to LAN Using a Cat. 5 cable, connect the NETWORK port on the SVP Server to the connecting port on the Ethernet switch. Connect power 1. Once the units have been properly grounded, connect the pow...

Page 21 - Connecting to the SVP Server; Connect via the serial port

PN: 1725-36033-001_C.doc 21 Configuring the SpectraLink 8000 SVP Server During initial setup of the SVP Server the IP address is established and the maximum number of active calls per AP is set. Optionally, you may enter a hostname and a location for software updates via TFTP. Connecting to the SVP ...

Page 22 - Connecting via telnet; The NetLink SVP-II System Menu; System Status

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 22 Connecting via telnet Telnet can only be used after the SVP Server’s IP address is configured. The telnet method of connection is used for routine maintenance of the SpectraLink Server for both local and remote adm...

Page 23 - Network Configuration

Configuring the SpectraLink 8000 SVP Server PN: 1725-36033-001_C.doc 23 Network Configuration Allows you to set network configuration options, including IP address and hostname. Change Password Allows you to change the password for SVP Server access. Network Configuration The IP address and other ne...

Page 24 - SendAll; IP Address

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 24 SendAll In an IP system with multiple SVP Servers, the SendAll option is provided to speed configuration and to ensure identical settings. The S=SendAll option allows you to send that configuration parameter to eve...

Page 26 - Syslog Server; Disable Telnet service; SVP Server Configuration

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 26 Syslog Server Logging can be set to Syslog or NONE . If Syslog is set, a message is sent to the syslog server when an alarm is triggered. Disable Telnet service Prevents Telnet access into the SVP Server. Reset the...

Page 27 - Phones per Access Point

Configuring the SpectraLink 8000 SVP Server PN: 1725-36033-001_C.doc 27 SVP-II Mode Defaults to SpectraLink IP for an IP environment. Press Enter to select and the screen is immediately redrawn with additional options for the IP environment. The following options must be configured: Phones per Acces...

Page 28 - First Alias IP Address/Last Alias IP Address; Enable H.323 Gatekeeper

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 28 First Alias IP Address/Last Alias IP Address The SVP Server uses an IP address when acting as a proxy for the wireless telephone. Therefore, one alias IP address is required for every installed Wireless Telephone. ...

Page 29 - QoS Configuration; Reset System

Configuring the SpectraLink 8000 SVP Server PN: 1725-36033-001_C.doc 29 that the administrator cannot change this option. It is automatically set by the system. Reset the system at exit to clear Maintenance Lock . Inactivity Timeout (min) Set the number of minutes the administrative module can be le...

Page 30 - DSCP Tag

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 30 QoS Configuration DSCP tags set packet priorities for QoS. DSCP Tag DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative priorities. Packets are tagged with a DSCP field in the IP heade...

Page 34 - SVP Server Failure

SpectraLink 8000 SVP Server: Administration Guide for SIP PN: 1725-36033-001_C.doc 34 SVP Server Failure If an SVP Server becomes unable to manage calls, any handset in an active call using that Server will lose the call. However, upon initiating a new call, the handset will locate another Server an...

Page 35 - Software Updates

PN: 1725-36033-001_C.doc 35 Software Maintenance The SVP Server uses proprietary software programs written and maintained by Polycom Corporation. The software versions that are running on the system components can be displayed via the System Status screen. You may obtain information about software u...

Page 39 - Network Status

Troubleshooting via System Status Menu PN: 1725-36033-001_C.doc 39 Network Status The SVP Server is connected to the Ethernet network, referred to as the LAN or Local Area Network. The information about that connection is provided through the Network Status screen. From the System Status Menu , sele...

Page 43 - Safety Notices

PN: 1725-36033-001_C.doc 43 Safety Notices WARNING: Changes or modifications to this equipment not approved by SpectraLink Corporation may cause this equipment to not comply with part 15 of the FCC rules and void the user’s authority to operate this equipment. WARNING: SpectraLink products contain n...

Page 45 - Index

PN: 1725-36033-001_C.doc 45 Index A Access point, description .....................................14 Administration of .................................................21 Alarms ....................................................................40 C Configuration Initial setup .......................