Patton IM1/I - Manuals

Patton IM1/I – Manual in PDF format online.

Manuals:

Manual Patton IM1/I

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - All warranty and nonwarranty repairs must be returned freight; This device is not intended to be; The Model IM1/I generates and uses radio frequency energy, and if

2 1.3 SERVICE All warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have aReturn Materials Authorization number on the outside of the shippingcontainer. This number may be obtained from Patton ElectronicsTechnical Service at: (301) ...

Page 3 - Corporate Headquarters; LAN; Remote/Satellite Office; Ethernet WAN Bridge; Figure 1. Typical Model IM1/I application

2.3 TYPICAL APPLICATION The Model IM1/I QuickConnect™ is designed to plug directly into the rear of a Patton Electronics baseband modem (i.e. Model 1090 or1092). The Model IM1/I is designed to be used as one of a pair ofunits. Figure 1 (below) illustrates a typical Model IM1/I installation. 2 2 .. 0...

Page 5 - Installing the New QuickConnectTM Module; even pressure should be sufficient to seat the; CONNECTING TO THE 10BASE-T ETHERNET PORT

3.1.2 Installing the New QuickConnect™ Module 1) Make sure the power switch on the base unit is off. Leave the power cord plugged into a grounded outlet to keep the unitgrounded. 2) Hold the module with the faceplate toward you and align the module with the guide slots in the rear panel of the base ...

Patton Manuals