ParaBody GS6 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody GS6 Gym System. Please read these instructions thoroughly and keep them for future reference. * Rubber mallet or hammer* 3/4” wrench* 9/16” wrench* Ratchet with 3/4” and 9/16” sockets* 5/32” Allen wrench...

Page 4 - COMPONENTS PARTS LIST

COMPONENTS PARTS LIST PAR T # ACU04-1528 ACU02-1526 ACU02-1451 ACU04-1529 ACU04-1530 ACU04-1532 ACU04-1533 ACU04-1534 ACU04-1535 ACU04-1536 ACU02-1523 ACU02-1071 ACU04-1528 ACU02-1524 ACU04-1539 ACU04-1551 ACU04-1541 ACU04-1542 ACU04-1543 ACU04-1544 ACU04-1545 ACU04-1531 ACU04-1546 ACU04-1547 ACU02-...

Page 5 - HARDWARE PARTS LIST

HARDWARE PARTS LIST PART # ACUDA1E012101213NB ACUDA1E01271413NB ACUDA1E01260013NB ACUDA1E01241413NB ACUDA1C01209213NB ACUDA1E01231213NB ACUDA1E01230013NB ACUDA1C01210413NB ACUDA1E03853416NB ACUDA1E03840016NB ACUDA1E03833416NB ACUDA1E03831216NB ACUDA1E03831416NB ACUDA1E03830016NB ACUDA1E03823416NB AC...

Page 6 - FIGURE 1

FIGURE 1 6 STEP 1: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the REAR FRAME (D) to the BASE (A) using two 3/8 X 3-3/4” BOLTS (11), two 3/8” WASHERS (23) and two 3/8” LOCK NUTS (28) as shown in FIGURE 1. 3/8 X 3-3/4” 11 A D 28 23

Page 7 - FIGURE 2

FIGURE 2 STEP 2: • LOOSELY assemble two BASE PLATES (B) and the FOOT ASSEMBLY (F) to the BASE (A) using two 3/8 X 4” BOLTS (10) and two 3/8” LOCK NUTS (28). See FIGURE 2. B 3/8 X 4” 10 F 28 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 7 A

Page 8 - FIGURE 3

FIGURE 3 8 STEP 3: E 3/8 X 3-3/4” 11 B 28 • SECURELY assemble the FRONT FRAME (E) to the BASE PLATES (B) using two 3/8 X 3-3/4” BOLTS (11) and two 3/8” LOCK NUTS (28) as shown in FIGURE 3.

Page 10 - FIGURE 6

FIGURE 6 STEP 6: 10 • Insert two GUIDE RODS (AI) into the REAR FRAME (O) as shown on FIGURE 6. (NOTE: If theGS-6 SHROUD OPTION was purchased, place the GUIDE RODS (AI) through the BOTTOM SHROUD BRACKET (found in SHROUD OPTION box) and intothe REAR FRAME (D) as shown in FIGURE 6. • Slide two WEIGHT S...

Page 11 - FIGURE 7

FIGURE 7 STEP 7: 11 • Swing the GUIDE RODS (AI) into the guide rod bushings in the RIGHT TOP ASSEMBLY (Y) as shown in FIGURE 7. • LOOSELY assemble the RIGHT TOP ASSEMBLY (Y) and the LEFT TOP PLATE (Y) to the REAR FRAME (D) and the FRONT FRAME (E) using three 3/8 X 3-3/4” BOLTS (11) a nd three 3/8” L...

Page 12 - FIGURE 8

FIGURE 8 12 STEP 8: • SECURELY assemble the PEC FLY MOUNT (U) and BACKING PLATE (V) to the FRONT FRAME (E) using two 1/2 X 3” BOLTS (7) and two 1/2” LOCK NUTS (26) as shown in FIGURE 8. 7 1/2 X 3” V E U 26

Page 13 - FIGURE 9

13 FIGURE 9 STEP 9: • Assemble the RIGHT PEC FLY ARM (T) and LEFT PEC FLY ARM (S) to the PEC FLY MOUNT (U) using two 1/2 X 92mm BOLTS (5), two 3” LONG SPACERS (35), four SHIM WASHERS (25), two 1/2” LOW HEIGHT LOCK NUTS (27) and four RH CAPS (45) asshown in FIGURE 9. 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2...

Page 32 - LIMITED WARRANTY

32 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired o...