ParaBody GS4 - Manual
ParaBody GS4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS
- Page 3 – BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH
- Page 5 – FIGURE 1; LOOSELY
- Page 7 – FIGURE 4; EXTREME CARE
- Page 9 – FIGURE 6; SECURELY; SECURELY TIGHTEN
- Page 10 – FIGURE 7; DO NOT TIGHTEN YET
- Page 11 – FIGURE 8; FIGURE 9
- Page 16 – Make sure the cable runs in the grooves of the pulleys.)
- Page 20 – (NOTE: Make sure the cable runs in the grooves of
- Page 24 – TROUBLE SHOOTING
- Page 26 – LIMITED WARRANTY
1
GS4 GYM SYSTEM
CLASS H
PART # 7657901
REV. A
Revision: 08/12/05
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: GS4-105
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...
IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody GS4 Gym System. Please read these instructions thoroughly and keep them for future reference. * Rubber mallet or hammer* 3/4” wrench* 9/16” wrench* Ratchet with 3/4” and 9/16” sockets* 5/32” Allen wrench...
FIGURE 1 5 STEP 1: 19 6 L 3/8 X 3” 8 19 C • LOOSELY assemble two BASE PLATES (C) to the FRAME (A) and BASE (B) using three 3/8 X 3-3/4” BOLTS (6) and four 3/8” LOCK NUTS (19). See FIGURE 1. B A • LOOSELY assemble the FOOTPLATE (L) to the lower holes in the FRAME (A) using one 3/8 X 3” BOLT (8) and o...
