ParaBody cm3 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody CM3 Gym System. Please read these instructions thoroughly and keep them for future reference. * Rubber mallet or hammer* 3/4” wrench* 9/16” wrench* Ratchet with 3/4” and 9/16” sockets* 5/32” Allen wrench...

Page 5 - PARTS LIST

PARTS LIST 5 PART # ACU04-1170 ACU04-1169 ACU04-1162 ACU04-1349 ACU04-1167 ACU04-1351 ACU04-1166 ACU04-1157 ACU04-1172 ACU02-1071 ACU02-1093 ACU02-1094 ACU02-1092 ACU04-1350 ACU04-1168 ACU07-0135 ACU6194601 ACU01-2155 ACU12-0043 ACU12-0042 ACU7292501 ACU04-0622 ACU10-0204ASY ACU01-1782 ACU01-2009 AC...

Page 6 - FIGURE 1

FIGURE 1 6 STEP 1: • LOOSELY assemble two BASE PLATES (11) to the BASE (1) and the UPRIGHT (2) using four 3/8 X 3-3/4” BOLTS (57) and four 3/8” LOCK NUTS (63). See FIGURE 1. 2 6 3 1 11 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 57 3/8 X 3-3/4” 6 6 3/8 X 3” 67 6 3 • LOOSELY assemble the FOOTPLATE (66) to ...

Page 8 - FIGURE 4

FIGURE 4 STEP 4: 8 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Insert two GUIDE RODS (18) into the BASE (1) as shown on FIGURE 4. (NOTE: If the CM3 SHROUD OPTION was purchased, place the GUIDE RODS (18) through the BOTTOM SHROUD BRACKET (found in SHROUD OPTION box)and into the BASE (1) as shown in FIGUR...

Page 9 - FIGURE 6

9 STEP 5: • Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT BOOM PLATES (14 & 15) as shown in FIGURE 5. • LOOSELY assemble the RIGHT and LEFT BOOM PLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X 3-3/4” BOLTS (57) and three 3/8” LOCK NUTS (63). See FI...

Page 10 - FIGURE 8

1 0 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 7: STEP 8: • SECURELY assemble one SEAT PAD (16) to the SEAT ADJUST (3) using two 3/8 X 3” BOLTS (67) and two 3/8” WASHERS (64). See FIGURE 8. FIGURE 8 FIGURE 7 • LOOSELY assemble the RIGHT and LEFT ARMS (6 & 7) to the RIGHT & LEFT ARM SUPPORTS ...

Page 11 - FIGURE 9

11 FIGURE 9 STEP 9: 4 0 2 3 4 3 • Securely assemble one SPRING PIN ASSEMBLY (40) and one 3 PRONG KNOB (43) to the FRONT UPRIGHT (2) as shown. • Insert the SEAT ADJUST ASSEMBLY into the UPRIGHT (2) as shown. The SEAT height can be adjusted using the SPRING PIN (40) and can be secured with the 3 PRONG...

Page 26 - SERIAL NUMBER LOCATION

MAINTENANCE MODEL #________________________ SERIAL #_________________________ DATE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 2 6 * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be pur...

Page 27 - LIMITED WARRANTY

2 7 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...

ParaBody cm3 - Manual

Table of Contents:

Summary

Other ParaBody Models