ParaBody 887 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 877 Lat Option. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. 3 NOTE: BOLT LENGTH IS...

Page 4 - PARTS LIST; FIGURE 1

4 PARTS LIST PART # LEA6800209 LEA6800610 LEA6800809 LEA6801009 LEA6801110 LEA6759810 LEA6274410 LEA6725310 LEA3116201 LEA3116101 LEA6802101 LEA6671601 LEA6692601 LEA3103102 LEA6140701 LEA6405201 LEA3116001 LEA6177001 LEA3119301 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 QTY 1 1 1 1 1 1 1 1...

Page 5 - FIGURE 2

5 FIGURE 2 STEP 2: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • LOOSELY assemble the PULLEY HOUSING (3) and the UPRIGHT (1) to the LOWER CROSS SUPPORT using two 3/8 X 4” BOLTS (38), four 3/8” WASHERS (30), and two 3/8” LOW HEIGHT LOCK NUTS (29). See FIGURE 2. 3/8 X 4” 38 3/8” LOW HEIGHT LOCK NUT 29 3 16 ...

Page 6 - FIGURE 3

6 STEP 3: FIGURE 3 • Insert two 2-1/2” ROUND END CAPS (19) into the ends of the ADJ. FOOT SUPPORT (2) as shown in FIGURE 3. • Insert one 1-3/4” END CAP (20) into the end of the ADJ. FOOT SUPPORT (2) as shown in FIGURE 3. • Attach four 3/4 X 1-1/2” GLIDES (24) to the outside of the ADJ FOOT SUPPORT (...

Page 8 - FIGURE 6; FIGURE 7

8 STEP 6: FIGURE 6 • LOOSELY assemble the TOP BOOM (4) to the UPPER CROSS SUPPORT using two 3/8 X 4” BOLTS (38), four 3/8” WASHERS (30) and two 3/8” LOCK NUTS (31). See FIGURE 6. STEP 7: FIGURE 7 • LOOSELY assemble the TOP BOOM (4) to the UPRIGHT (1) using one 1/2 X 4” BOLT (28), one 1/2 X 3-1/2” BO...

Page 9 - FIGURE 8

9 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 8: FIGURE 8 • Route the 115-1/4” CABLE (11) through the TOP BOOM (4) as shown in FIGURE 8. • SECURELY assemble three 3-1/2” PULLEYS (9) into the slots of the TOP BOOM (4) using three 3/8 X 2-3/4” BOLTS (32), six 3/8” FLANGE SPACERS (33), and three 3/8” LO...

Page 10 - FIGURE 9

STEP 9: FIGURE 9 1 0 31 • Place one 3-1/2” PULLEY (9) into the loop of the CABLE (12) below the second and third PULLEY of the TOP BOOM (4) as shown in FIGURE 9. • LOOSELY assemble two 3/16 X 1-3/4 X 5-1/4” PLATES (23) to each side of the 3-1/2” PULLEY (9) using one 3/8 X 2” BOLT (35), two 3/8” WASH...

Page 14 - SERIAL NUMBER LOCATION

MAINTENANCE MODEL #________________________ SERIAL #_________________________ DATE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 1 4 * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be pur...

Page 15 - LIMITED WARRANTY

1 5 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...