Oricom UHF200 - Manuals - manualsarea.com

Page 3 - Table of contents; This unit complies with all relevant Australian

3 Table of contents This unit complies with all relevant Australian and New Zealand approval requirements. Table of contents .......................................................................... 3 Safety Information and Warnings .................................................. 4 Controls and ...

Page 4 - Safety Information and Warnings; Please read before installing or opearating Your; WARNING; Potentially Explosive Atmospheres; Areas with potentially explosive atmospheres are often, but; Blasting Caps and Areas

4 Safety Information and Warnings Please read before installing or opearating Your Oricom Radio The operation of this radio in Australia and New Zealand is subject to conditions in the following licenses. In Australia the ACMA Radio communications (Citizen Band Radio Stations) and in New Zealand by ...

Page 5 - Box Contents; screws for RF Radio; Controls and Connectors

5 Box Contents UHF200 1 x RF Radio1 x Controller Speaker Micrphone1 x DC Power Cord with inline fuse 1 x Mounting bracket with mounting screws for RF Radio 1 x Microphone Hanger1 x 2m long Extention cable 1 x Coupler for extention cable 1 x User Guide UHF100 1 x RF Radio1 x Remote Head Unit with 2m ...

Page 6 - control

6 Controls and Connectors Front View Remote Head unit (UHF100) 1. Microphone connector2. LCD Display3. Power On/Off, channel & Volume control 4. Function button by short push & Duplex On/Off by long push 5. Open Scan, Memory On/Off, Group Scan 6. Priority Channel On/Off, Key Lock On/Off, Alp...

Page 7 - Rear View; Up

7 Controls and Connectors Rear View Rear view of Radio (UHF100 & 200) 1. 3.5mm external jack for optional 8 ohm speaker2. Power Supply connection3. Antenna connection Standard Microphone (UHF100) 1. Push To Talk (PTT) button2. Volume Up , Channel Up 3. Volume Down , Channel Down 4. Power On/off,...

Page 8 - Top view of Contoller Speaker Microphone (UHF200); Down; Front view of Contoller Speaker Microphone (UHF200)

8 Controls and Connectors Top view of Contoller Speaker Microphone (UHF200) 1. Volume Down , Channel Down 2. Volume Up , Channel Up 3. Power On/Off Front view of Contoller Speaker Microphone (UHF200) 4. LCD Display5. Function button & Duplex On/Off6. Open Scan, Memory On/Off, Group Scan7. Priori...

Page 10 - Installation; INSTALLATION; CAUTION

10 Installation INSTALLATION CAUTION When installing your radio in your vehicle, check that during installation you do not damage any wiring or vehicle components that may be hidden around the mounting position.If you are unsure about how to install your radio, we suggest for optimum performance you...

Page 11 - Fitting the Controller Microphone Speaker (UHF200); the plug into the socket until it ‘clicks’.

11 1. Fix the mounting bracket in place by screwing through the slots in the bracket. 2. Fix the remote head unit to the mounting bracket with the thumb screws provided. 3. Connect the standard microphone to the remote head socket, and tighten up the thumb screw. Fitting the Controller Microphone Sp...

Page 12 - Disconnecting the Remote Head/Speaker Controller Microphone; away from the front panel.; DC Power Connection

12 Disconnecting the Remote Head/Speaker Controller Microphone It is recommended that the remote head be left permanently connected to the radio, but if it must be disconnected, proceed as follows:1. Lift the rubber boot and the lip of the raised area on the front panel.2. Ease the rubber boot out o...

Page 13 - Antenna installation; and mount it in a good location.

13 Radio stays ON when the ignition is switched OFF Connect the radio's negative (black) lead to the vehicle chassis, or directly to the batteries negative terminal.Connect the radio's positive (red) lead via the 2 Amp fuse to the battery's positive terminal. Alternatively, the positive lead could b...

Page 14 - Operations; Power on and off

14 Operations Power on and off * Press and hold the PWR button on the UHF100 Remote Head or the UHF200 microphone PWR button for 2 seconds. * The default channel is set at CH01. 200RX CH 200RX CH UHF100 UHF200 Volume control * The UHF100 has a rotary electric volume control. Adjust the volume by rot...

Page 15 - Tri Function buttons; To use the primary function (; Transmitting

15 Operations 200RX CH 200RX CH blinking Tri Function buttons To use the primary function ( F, SC, PRI, ID, MO ) press the required button. To use the secondary function ( DPX, MEM, LO, CAL, TSQ ) press and hold the button for 2 seconds.To use the third function ( OS/GS, ALPHA, QUIET, MENU ), press ...

Page 16 - Priority Channel; To store a Priority Channel, press the; To store a Priority Channel; appears when the priority channel is set.; CTCSS; CTCSS (Continuous Tone Coded Squelch System); Press the

16 Operations Priority Channel To store a Priority Channel, press the PRI/LO button. The letter "P" will appear when the priority channel is set. The channel you selected as your Priority Channel will then be automatically monitored during the Group Scan. Note: You can only store one channel...

Page 17 - Press and hold the; Repeat steps 1 and 2 above.

17 Operations Selecting the Required CTCSS Tone To pre-select the CTCSS tone on your radio, please refer to the MENU settings on page 24. Enabling CTCSS on a Channel If a CTCSS tone has been selected, it can be enabled on individual channels.1. Rotate the Channel knob to select the required channel....

Page 18 - Group Scan; Push and hold the

18 Open Scan Group Scan With Group Scan the Radio scans for activity, but in addition, it also inserts your Priority Channel into the scan sequence. This means that your Priority Channel will be monitored regularly while scanning to ensure that no calls are missed. Any signals received on your Prior...

Page 19 - button followed by

19 Selcall Selcall or Selective Calling is a function that allows you to selectively call another radio, using a unique ID number. Your radio has 10 programmable Selcall ID memories. The ID memories are displayed as "C0 to C9". Here you will program Selcall ID numbers of other radios.Your Ra...

Page 20 - Receiving Selcalls

20 Entering, Editting and Storing a Selcall Name or ID number 1. Briefly press the ID/CAL button. The CALL TO mode will be selected and the last-sent Selcall memory location will be displayed. 2. Rotate the Channel knob to select the required Selcall memory (locations C0 to C9). If no ALPHA name or ...

Page 21 - To return the call; Press; Cancelling the Selcall Alert

21 To return the call Press F/DPX and hold the ID/CAL button for 2 seconds until the radio beeps. The callers Selcall Identity will be sent to the caller. Cancelling the Selcall Alert To cancel the alarm and talk on the channel, press the PTT button. The alarm will be cancelled and the channel will ...

Page 24 - Third functions MENU list

24 Third functions MENU list * Use the channel knob to change the value of each setting.* Use the Scan button to select the next function. * If a button is not pressed within 8 seconds the Radio will automatically exit the menu mode. * Please see below menu modes. Control Functions STEP Display Defa...

Page 25 - CTCSS and DCS setting

25 Operations SQL: The radio has 8 preset ( off - 7) squelch levels: off - SQ off (monitor on condition) 1 - Max sensitivity (min squelch) 7 - min sensitivity (max/tight squelch) CTCSS and DCS setting This feature allows you to receive signals only from callers who have selected the same CTCSS and D...

Page 26 - Duplex Operation; General; CH and Number

26 Operations Duplex Operation General Your radio has a Repeater Access function to allow use of local Repeater stations (if available in your area). Repeaters are shared radio system installed by interested parties (clubs, local business etc.) that pick transmissions on specific channels and re-tra...

Page 27 - button to toggle the Duplex function On and Off.; Key Lock

27 Operations If you transmit on CH01 duplex mode, you are actually transmitting on CH31 the repeater station down converts your signal and retransmits on CH01.Your UHF100 and UHF200 allows you to pre-select Duplex operation individually on each channel.Push and hold the F/DPX button for 2 seconds, ...

Page 28 - button and then the Power button to access frequency

28 Operations 200 Receive (RX) only ChannelsManual Programming The UHF Radio has a wide band search feature which will allow you to search Frequencies ranging from 400-512MHz (in 12.5KHz steps). You may search the full range or you may search one of 4 smaller bands separately.Turn power on. Briefly ...

Page 29 - Automatic programming

29 Operations * press the PRI/LO button, next 2 digits will be blinking for the next frequency digits. * Rotary channel switch to select which 2 frequency digits you want. Briefly press the F/DPX button and Power button to exit. Automatic programming 1. Press the PWR button to turn the radio on.2. B...

Page 30 - UHF channels and frequencies; Channel Frequency Table; Radiocommunications (Citizen Band Radio Stations) Class

30 UHF channels and frequencies Channel Frequency Table Radiocommunications (Citizen Band Radio Stations) Class Licence 2002 No licence is required to own or operate this radio in Australia and New Zealand. The Radiocommunications (Citizen Band Radio Stations) Class Licence 2002 contains the technic...

Page 31 - channels and should be used only in an emergency.

31 UHF channels and frequencies 15 476.775 Simplex 16 476.800 Simplex 17 476.825 Simplex 18 476.850 Simplex 19 476.875 Simplex 20 476.900 Simplex 21 476.925 Simplex 22 476.950 No Use 23 476.975 No Use 24 477.000 Simplex 25 477.025 Simplex 26 477.050 Simplex 27 477.075 Simplex 28 477.100 Simplex 29 4...

Page 32 - the customary road vehicle channel.; 8 CTCSS CODE LIST; CODE

32 UHF channels and frequencies Channel 11 is a calling channel generally used to call others and channel 40 is the customary road vehicle channel. Once contact is established on the calling channel, both stations should move to another unused "SIMPLEX" channel to allow others to use the cal...

Page 36 - Customer Support

Australia Oricom International Pty LtdLocked Bag 658South Windsor, NSW 2756 New Zealand Oricom Live Chatwww.oricom.co.nz Customer Support Email: [email protected]: www.oricom.com.auPhone: 1300 889 785Fax: (02) 4574 8898 Customer Support If you suspect your product is not functioning to specif...