Oricom TP29 - Manuals

-Operation- 3 Installation 3.1 Safety information NOTE! Before installation, it is essential that you read the general information at the beginning of this user guide. 3.2 Check contents of pack The following items are supplied in this pack: One telephone base One handset One telephone line cord One...

-Operation- 3.8 Fitting the desk support If you intend to use your telephone on a desk, then the desk support supplied must be fitted. To do this, turn the telephone over. Now insert the two upper hooks into the openings provided and push the desk support firmly home. If you ever need to remove the ...

-Operation- 3.11 Setting the time/date If you want to reset the time or change a time already entered, proceed as follows: 1. Press the DIAL/MENU button for 3 seconds. The display shows “OPTIONS cd ”. 2. Press the c buttons until the display shows “TIME/DATE”. 3. Press the DIAL/MENU button. The hour...

-Operation- 3.14 Last Number Redial If a connection that you have dialled is engaged or you were unable to get through, simply replace the receiver. The last number dialled will be saved in the telephone automatically. To use the redial facility, proceed as follows: 1. Lift the receiver or press the...

-Operation- B: Making a call using the handsfree facility 1. Press the handsfree button . The LED above the button will come on and you will hear the dial tone from the speaker. 2. Now dial the required telephone number. The display shows the number dialled. If the number dialled is longer than 32 d...

-Operation- E: Receiving Calls Calls can be accepted either by using the receiver or by using the handsfree facility. Lift the receiver or use the handsfree facility by pressing the handsfree button. To end the call, replace the receiver or press the handsfree button . F: Muting the microphone When ...

-Operation- 5.5 Making a call using the speed dial buttons 1. Lift the receiver or press the handsfree button . 2. Press the MEMORY button 3. Now press the required storage location between 0 and 9 on the keypad. The stored number will now be dialled automatically. 4. To end the call, replace the re...

-Operation- This indication in the display shows that there is a total of 34 calls in the caller list. There are 5 new calls in the caller list that have not yet been checked. In addition, when there are new calls, the NEW Call indicator flashes. 6.1 Viewing the Caller List While the phone display “...

-Operation- 6.4 Select Language ENGLISH, FRANCAIS, ESPANOL, DEUTSCH, ITALIANO, PORTUGUES, TURKISH, DANSK prompts for caller I.D. message display can be selected. Please proceed as follows: 1. Press the DIAL/MENU button for 3 seconds. The display shows “OPTIONS cd ”. 2. Press the c buttons until the ...

-Operation- 6.8 Deleting the entire caller list 1. Press d or c button to display the caller list. 2. Press and hold CLEAR button for 5 seconds. Display shows “DEL ALL CALLS?” 3. Press CLEAR button again to confirm. 6.9 Dialling a telephone number directly from the Caller List You can dial telephone...

-Operation- 7 Using phone on a PBX (phone System) 7.1 Pause function when using phone on a PBX Note! The pause function between the code for the outside line (usually 0 or 9) and the dialling tone described in this chapter is only necessary on older private exchanges. With some private exchanges, th...

-Operation- 8 Important Information 8.1 Troubleshooting If you feel this product is not working correctly please consult the user guide and ensure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the ...