Oricom BB100 - Manuals - manualsarea.com

Page 2 - Contents; a. To access phonebook via ‘Menu’ option:

- 2 - Contents Safety Information........................................................................................................ 4 Unpacking your Oricom BB100 .................................................................................. 4 Handset and Base unit.............................

Page 4 - Safety Information; Avoid exposure of this telephone to moisture or liquid.; CAUTION

- 4 - Safety Information • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • Do not use the handset in an explosive ha...

Page 5 - Handset and Base unit; - To adjust earpiece volume during a call

- 5 - Handset and Base unit 1. Receiver 2. LCD display 3. PHONEBOOK button - Use to access phonebook. 4. TALK button - Press to make/receive/end external calls. - To escape from programming 5. Up button - To enter the redial list in standby mode - Long press to enter a pause in the dialling sequence...

Page 7 - Handset battery charge level

- 7 - Selecting a site for the Base unit The phone base unit should be installed where the mains adaptor plug will reach the power socket and, the telephone cable will reach your telephone socket and not to close to other electrical equipment (such as washing machines, microwaves, TV, fluorescent li...

Page 8 - Standby mode; , the clock will be inaccurate. When the power is; USING YOUR PHONE

- 8 - Standby mode When the handset is not in use is in the standby mode. The LCD will display: Where: 1: Handset assigned number BB100: Handset name 10:37: Time of the day ( 10 AM, 37 minutes) (ex : 23:37 : 11 PM, 37 minutes) Note: If power is disconnected from your phone , the clock will be inaccu...

Page 9 - To redial any of the last 10 numbers called; Using MUTE

- 9 - 1) Press ‘TALK’ button to answer the call. 2) To end the call, either press TALK button or place the handset back on the base. Re-dialing The last 10 dialled external numbers are stored for redialling (in the re-dial list). The number can consist of up to 25 digits. The user can select any num...

Page 13 - time, then “02” will show after the name...) will be

- 13 - CALLER ID (CID) If you subscribe to Caller ID (charges may apply) to your telephone service providers Caller ID service, numbers of the incoming calls will be displayed on the screen and stored in the call log. (Please consult your telephone service provider for details about the service) Cal...

Page 15 - or; Message waiting service:

- 15 - 3) Press OK to view the number if the name is displayed first. Press OK again to see the remaining digits, if the number consists of more than 12 digits). 4) Press OK again to show repeat times of the call if the number is displayed first. 5) Press OK again to display the date and time of the...

Page 17 - Key beep

- 17 - 8. Press and hold CANCEL to exit to standby mode, or 9. Press the TALK button to go back to the standby mode. Setting Base Ringer Volume: 1. Press OK button. ‘ ’ is displayed. 2. Use DOWN button to scroll to . 3. Press OK button, is displayed. 4. Press OK button. The LCD shows ‘ : X’ (X= one ...

Page 18 - Out of range

- 18 - 4) Press OK button again. is displayed. 5) Press OK button again. or is displayed. 6) or Use UP or DOWN to select ON or OFF setting. 7) Press OK button to confirm the setting. 8) Press CANCEL and hold to exit to standby, or 9) Press the TALK button to go back to the standby mode. Low battery ...

Page 23 - NOT AVAIL

- 23 - TROUBLESHOOTING GUIDE Problem Possible Cause Action Taken Programming Display NOT AVAIL RF Interference occurs during programming. Retry the programming; if possible move closer near the phone base station. Interference during communications Out of range or close to other electrical appliance...

Page 25 - Warranty Information

- 25 - Warranty Information This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, water ingress, excessive voltage, telephone line faults or lightning. This guarantee in no way affects your statutor...