Oregon Scientific RM818P - Manuals

Oregon Scientific RM818P – Manual in PDF format online.

Manuals:

Manual

Manual Oregon Scientific RM818P

Summary

Page 2 - USER MANUAL CONTENTS

EN 1 USER MANUAL CONTENTS Introduction .............................................................. 2 Key Features ............................................................ 2 Front View .............................................................. 3 Back View .....................................

Page 3 - NOTE; INTRODUCTION; Thank you for selecting the Oregon Scientific; Daily dual alarm with 8-minute Snooze; Keep this manual handy as you use your new; KEY FEATURES; Time, alarm status and animation projection on your

EN 2 NOTE INTRODUCTION Thank you for selecting the Oregon Scientific TM RM818P Cool RF Projection Clock with Animated Projection asyour product of choice. This device is designed to give you many years of reliableservice, including the following conveniences: • Radio-controlled calendar clock* • Dai...

Page 5 - BACK VIEW

EN 4 1 2 3 4 5 6 7 1. Battery compartment • The unit uses 2 AAA / UM-4 1.5V batteries for power. 2. Adaptor slot 3. Reset hole • Returns all settings to default values. 4. [EU / UK] switch • Slide to select your nearest radio signal base i.e. England or Germany. 5. UP button • Press and hold for 2 s...

Page 6 - LCD DISPLAY SYMBOLS; -Indicates the condition

EN 5 LCD DISPLAY SYMBOLS 1. Radio Reception Signal -Indicates the condition of radio reception. 2. Clock Time 3. Alarm 4. Alarm Time 5. Animation speed -Can select fast or slow. 6. Low Battery -Appears when power is low. 7. Time Zone indicator 8. Alarm-on -Appears when alarm is activated. 1 2 3 4 5 ...

Page 7 - GETTING STARTED; UNPACKING THE PRODUCT; SAFETY & CARE INSTRUCTIONS; SAFETY PRECAUTIONS

EN 6 • Do not scratch hard objects against the LCD display as this may cause damage. GETTING STARTED UNPACKING THE PRODUCT When you unpack your product, make sure to keep allthe packing materials in a safe place, in case you needto later transport or return it for servicing. The following items shou...

Page 8 - I n s t a l l t h e b a t t e r i e s b y m a t c h i n g t h e c o r r e c t; WARNING; Reversing the polarity may damage the; ADAPTOR

EN 7 1. Locate the battery compartment. 2. I n s t a l l t h e b a t t e r i e s b y m a t c h i n g t h e c o r r e c t p o l a r i t y. A l w a y s u s e t h e c o r r e c t b a t t e r y t y p e(2 x UM-4 AAA-sized 1.5V batteries). WARNING Reversing the polarity may damage the product. Replace the...

Page 9 - Reception can be aff ected by a number of; When the unit is receiving the signal, the Radio; RADIO RECEPTION DESCRIPTION; RADIO RECEPTION

EN 8 Even though there are areas that may have moredifficulty in receiving a signal, the Radio-controlled / RFclock contains accurate quartz movement and will retainprecise timing if the signal is missed on a rare occasion. Reception can be aff ected by a number of factors. For best reception, place...

Page 10 - ENABLING / DISABLING RECEPTION; SETTING THE CLOCK MANUALLY; CLOCK MODE

EN 9 ENABLING / DISABLING RECEPTION To manually enable the reception of the RF signal: 1. Press and hold the UP button for 2 seconds until the Radio Reception symbol appears and flashes. To manually disable the reception of the RF signal: 2. Press and hold the DOWN button for 2 seconds until the Rad...

Page 11 - CLOCK SETTING MODE

EN 10 Press the CLOCK button to toggle between the three modes. CLOCK SETTING MODE To set the time: 1. Press and hold the CLOCK button for more than 2 seconds. 2. Press the CLOCK button two more times. (Use the UP and DOWN buttons to adjust the hour). NOTE 3. Press the CLOCK button once more to set ...

Page 13 - SELECTING A LANGUAGE

EN 12 DATE FORMAT SETTING MODE MONTH SETTING MODE YEAR-SETTING MODE The order of the flashing items is: time zone offset, 12 / 24hr format, hour, minute, year, DM< MD, month, day, language, exit clock setting mode. SELECTING A LANGUAGE The main unit can display the weekday in five differentselect...

Page 14 - THE ALARM FUNCTION

EN 13 4. Press the CLOCK button once more to exit the set mode. LANGUAGE SETTING MODE Press the ALARM button or the PROJECTION ON button to exit the Clock Setting mode. Any changed item will be effective afterward. NOTE THE ALARM FUNCTION RM818P English R7 OP 9/10/04, 3:20 PM 13 Black

Page 16 - ACTIVATING / DEACTIVATING THE ALARM; THE SNOOZE FUNCTION

EN 15 3. Adjust the minute of the alarm time by using the UP and DOWN buttons. 4. Press the ALARM button when done. 5. Select the alarm types (sound only; vibration alarm only or both) by using the UP and DOWN buttons. 6. Press the ALARM button when done. The alarm time should now be displayed. ACTI...

Page 17 - ANIMATION SPEED SETTING; THE PROJECTOR FUNCTION; ACTIVATING THE PROJECTOR

EN 16 If the AC / DC adaptor is plugged, press the P R O J E C T O R O N a n d t h e p r o j e c t o r w i l l s t a y continuously on. Press the PROJECTOR ON button again to deactivate the continuous projection-on function. ANIMATION SPEED SETTING To enter to the projector setting mode: 1. Press th...

Page 18 - ANIMATION ON / OFF SETTING

EN 17 To flip the projected time upside down: 1. Press the SNOOZE / LIGHT button. 2. While the projector is on, press the SNOOZE / LIGHT button again to flip the time. 3. To flip again, press the SNOOZE / LIGHT button again, etc. THE VIBRATING DEVICE (OPTIONAL) The vibrating wake-up device receives ...

Page 19 - THE BACKLIGHT; DEFAULT SETTINGS; TROUBLESHOOTING GUIDE; BASIC FUNCTIONS

EN 18 NOTE The vibrating device is powered by two "AA" 1.5V alkaline batteries (included). It is also compatiblewith rechargeable batteries (not included). THE BACKLIGHT The user can press the SNOOZE / LIGHT button at the base of the unit to enable the backlight function and thebacklight wil...

Page 20 - SPECIFICATIONS; Width x Height x Depth:

EN 19 Problem: Radio antenna is not displayed on the LCD screen. Symptom: The RF signal cannot be received. Check this: O b s t a c l e s ( e i t h e r e l e c t r o m a g n e t i cinterference or objects) are barring thesignal from reaching the main unit. Remedy: Move the unit away from any sources...

Page 21 - Operation temperature:; WARNINGS; ABOUT OREGON SCIENTIFIC

EN 20 Alarm Duration: 2 minute Power supply: 2 x UM-4 / AAA 1.5V batteries Operation temperature: -5 ° C to +50 ° C WARNINGS To ensure you use your product correctly and safely,read these warnings and the entire user manual beforeusing the product. The warnings given here provide important safetyinf...

Page 22 - EC-DECLARATION OF CONFORMITY; Safety of information technology equipment; Additional information:; COUNTRIES RTTE APPROVAL COMPLIED; All EC countries, Switzerland; CH; and Norway

EN 21 EC-DECLARATION OF CONFORMITY This product complies with the essential requirementsof Article 3 of the R&TTE 1999 / 5 / EC Directive, if usedas intended and the following standards have beenapplied: Safety of information technology equipment (Article 3.1.a of the R&TTE Directive)Applied...