Oregon Scientific PS-L06 - Manuals

Page 3 - TABLE OF CONTENTS

EN TABLE OF CONTENTS About this guide ........................................................ 2Product overview ....................................................... 3Getting started .......................................................... 8 Batteries ..............................................

Page 8 - NOTE; AC power adapter not shown.

EN BOTTOM VIEW DESCRIPTIONS 1. Battery compartment ( → 8) 2. Light sensitivity knob ( → 20) 3. Reset button ( → 8, 21) 4. Antenna ( → 18) 5. Headphone jack ( → 19) 6. DC power input jack ( → 8) 7. Backlight switch ( → 19) NOTE AC power adapter not shown. 6 3 2 1 4 5 6 7 PS-L06_GB-final.p65 8/8/03, 1...

Page 10 - Insert the batteries in the remote unit before you; If the AC power becomes unavailable, the unit

EN GETTING STARTED BATTERIES Batteries for the remote and main units are suppliedwith this product. Replace them whenever the lowbattery signal ( ) displays. Remove the batterycompartment lid on the bottom of the main unit, andinsert the batteries. Use a small Phillips screwdriver toremove the remot...

Page 11 - REMOTE UNIT SET UP

EN SWITCH BETWEEN MODES Press SELECT . The select mode will flash. The display will stop flashing if no key is pressed within 5 seconds. CHANGE SETTINGS Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch options. REMOTE UNIT SET UP Up to 3 remo...

Page 12 - For best results, place the unit away from metal

EN • Position the unit so that it faces the main (indoor)unit. Minimize obstructions such as doors, walls,and furniture. You may need to experiment with various locations toget the best reception. CLOCK This product can automatically synchronize the date andtime with official time-keeping organizati...

Page 13 - ALARM

EN TO DISABLE OR ENABLE AUTO-SYNCHRONIZATION In Clock mode, Press DOWN for 2 seconds to disable the auto-synchronization. The unit will not respond toradio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. SET OR CHANGE THE CLOCK 1. Press SELECT to s...

Page 14 - CALENDAR

EN SELECT to confirm. If you choose , also select the melody (1 – 7)and volume level (Lo or Hi). If you choose , use the radio controlbuttons to select the AM/FM band, radio stationand volume level ( → 18). 4. Press SELECT again when you are finished. SNOOZE Press the SNOOZE/LIGHT button the top of ...

Page 15 - MOON PHASE

EN 3. Select the year, month, date, and language. Press UP or DOWN to change the setting. Press SELECT to confirm. NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. MOON PHASE Press SELECT until the Calendar Area flashes. Then, press UP or DOWN to chang...

Page 20 - RADIO

EN SET UNIT While in Temperature / Humidity Mode, press SELECT for 2 seconds. Press UP or DOWN to switch between ° C and ° F. Press SELECT to confirm. RADIO You can listen to PLL digital radio broadcasts with thisproduct. ANTENNA The antenna wire is located in the battery compartment.Position it for...

Page 21 - BACKLIGHT

EN STORE STATION TO MEMORY Press STATION for 2 seconds. The assigned number (1 – 8) will show in the Radio Area. SLEEP TIMER Press SLEEP . To change the timer length (0 – 120 minutes in increments of 10) press UP or DOWN . The radio automatically turns off when the timer reaches 0.To manually turn o...

Page 22 - PROJECTOR

EN 3. The Light Sensitivity knob is located in the battery compartment. Rotate to adjust. 4. When activated, the continuous backlight will behalf as bright as usual. To achieve full brightness,press SNOOZE/LIGHT. PROJECTOR This product has a built-in projector for viewing timeand alarm status at nig...

Page 26 - SPECIFICATIONS

EN SPECIFICATIONS Main unit dimensions L x W x H 181 x 45 x 185.3 mm(7.1 x 1.77 x 7.3 inches) Weight 994 grams with battery Remote unit dimensions L x W x H 75 x 35 x 78.3mm(3 x 1.4 x 3.1 inches) Weight 136 grams with battery Temperature Unit ° C or ° F Range Main unit: -5 ˚C to 50 ˚C (23 ˚F to 122 ...

EN EC-DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 07 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for itsintended use and that the following standard(s) has/havebeen applied: Radio frequency spectrum(A...