Oregon Scientific PS-L01 - Manuals

Page 3 - TABLE OF CONTENTS

EN 1 TABLE OF CONTENTS About this guide ........................................................ 2Product overview ....................................................... 3Getting started .......................................................... 8 Batteries ............................................

Page 8 - NOTE; AC power adapter not shown.

EN 6 BOTTOM VIEW DESCRIPTIONS 1. Battery compartment ( → 8) 2. Light sensitivity knob ( → 18) 3. Reset button ( → 8, 18) 4. Backlight switch ( → 17) 5. DC power input jack ( → 8) NOTE AC power adapter not shown. 5 3 2 1 4 PS-L01_GB-final 8/8/03, 11:35 AM 8

Page 10 - AC POWER ADAPTER; SWITCH BETWEEN MODES

EN 8 GETTING STARTED BATTERIES Batteries for the remote and main units are suppliedwith this product. Replace them whenever the lowbattery signal ( ) displays. Remove the batterycompartment lid on the bottom of the main unit, andinsert the batteries. Use a small Phillips screwdriver toremove the rem...

Page 11 - REMOTE UNIT SET UP

EN 9 CHANGE SETTINGS Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch options. REMOTE UNIT SET UP Up to 3 remote units can be used with this product tomonitor outdoor temperature and humidity. Themeasurement unit ( ° C or ° F) and channel num...

Page 12 - DOWN

EN 10 CLOCK This product can automatically synchronize the date andtime with official time-keeping organizations in Frankfurt,Germany (PS-L01) or Rugby, England (PS-L01U).When the unit is within 1500 km (932 miles) of a RFsignal, the reception icon will blink during reception. RECEPTION Reception ta...

Page 13 - ALARM

EN 11 SET OR CHANGE THE CLOCK 1. Press SELECT to switch to the Clock Mode. The time will flash. 2. Press and hold SELECT for 2 seconds to enter the setting mode. 3. Select the 12/24-hour format, hour, and minute.Press UP or DOWN to change the setting. Press SELECT to confirm. ALARM When activated, t...

Page 14 - CALENDAR; MOON PHASE

EN 12 To turn the alarm off completely (deactivate it for thenext day), press ALARM . CALENDAR SET DATE Clock auto-synchronization must be deactivated beforeyou manually set the date. ( → 10) 1. Press SELECT several times until the calendar area flashes. 2. Press and hold SELECT for 2 seconds to ent...

Page 15 - BAROMETER

EN 13 BAROMETER This product tracks barometric pressure changes overthe past 24 hours to provide the weather forecast( → 14) and a trend line showing the direction of barometric change. Barometric changes are measuredby the main (indoor) unit. BAROMETRIC TREND The barometric trend arrow for the last...

Page 18 - COMFORT ZONE

EN 16 NOTE Signals from household electrical appliances such as doorbells and home security systems cancause temporary reception failures between the indoorand outdoor units. This is normal and does not affectthe general performance of the product. Reception willautomatically resume once the interfe...

Page 19 - BACKLIGHT

EN 17 TRENDS The trend arrow for the last 30 minutes always displays.Indoor and outdoor temperature and humidity trends areshown separately. SET UNIT While in Temperature / Humidity Mode, press SELECT for 2 seconds. Press UP or DOWN to switch between ° C and ° F. Press SELECT to confirm. BACKLIGHT P...

Page 23 - SPECIFICATIONS

EN 21 SPECIFICATIONS Main unit dimensions L x W x H 181 x 45 x 185.3 mm(7.1 x 1.77 x 7.3 inches) Weight 894 grams with battery Remote unit dimensions L x W x H 75 x 35 x 78.3mm(3 x 1.4 x 3.1 inches) Weight 136 grams with battery Temperature Unit ° C or ° F Range Main unit: -5 ˚C to 50 ˚C (23 ˚F to 1...

EN RTT&E Compliant Countries: All EC Countries, Switzerland CH , and Norway N © 2003 Oregon Scientific. All rights reserved. EC-DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 07 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/...