Oregon Scientific OS6976 - Manuals

EN Make sure your package includes the items shown here. In addition, your package also includes some mounting hardware, please refer to the UnderCabinet Mounting section for details. CAUTION: To reduce the risk of fire, do not place any heating or cooking product beneath this unit. • Never install ...

EN • Install the wall base unit into an electrical outlet that is near a telephone (modular) jack. • The Spacemaker® is a cordless speakerphone with radio and answering machine. Before mounting it under a cabinet, check if the cordless speakerphone and the radio work well atthe selected location fir...

EN 1. Connect one end of the telephone line cord to the LINE jack on the bottom of the wall base unit. 2. Connect the other end of the telephone line cord to a telephone jack on the wall. 3. Raise the antenna on the base. 1. Plug the wall base unit into an electrical outlet. 2. Make sure that its pi...

EN TIP: Before mounting the Spacemaker® under the counter, it is highly recommended to check if the speakerphone and radio work well at the mounting location first. Plug the AC power converter into an electrical outlet and the DC connector into the back of theSpacemaker®. CAUTION: Use only the Orego...

EN 4 –1/4” Spacers 4 – Washers 4 –1/2” Spacers 4 – Cord hooks 4 – 1” Spacers 4 – 2” Phillips head screws 1 – Mounting template CAUTION: To reduce the risk of fire, do not place any heating or cooking product beneath this unit. • Select a location to mount the Spacemaker® • Make sure that there is an...

EN Cut out the template on the line indicated. The template size and screw hole positions are identicalto the top of the unit. 1. If your cabinet does not have an overhang: a) Position the template in the desired location on the underside of the cabinet, flush with the front edge of the cabinet. b) ...

EN NOTE: If your cabinet has glue blocks or other obstructions, cut out corresponding areas on the template to clear them. Do not cut out or cut through the screw holes in thetemplate. CAUTION: We recommend safety glasses be worn while drilling screw holes to prevent the possibility of eye injury. 2...

EN 5. Insert screws from the INSIDE of the cabinet. If you did not countersink the drilled holes, position the washers, flat side down, and place the screws in the holes. If your cabinet does not have an overhang, go to Step 7. 6. Hold the screw heads down while you push the selected spacers onto th...

EN + - skip tune/seek review radio on•off am•fm radio controls radio presets format flashprog exit speaker + - CIDVOL delete cid erase play stop memo message answerer controls channel a a n n o u n c e timer m u t e mic mic TALK CALL BACK charge MIN HOUR DAY/TIMECHECK press to check/hold to change R...

EN The buttons used for setting the clock, DAY/TIME CHECK, HOUR and MIN, are located in thecharge cradle of the Spacemaker®. The clock flashes at initial setup or after a power outage toindicate that it needs to be set. Follow the steps below to set the clock. NOTE: The first incoming call with Call...

EN SET LANGUAG > ENG FRA The Ringer Switch is located in the charge cradle of the Spacemaker®, and is pre-set to LO. NOTE: If you turn the ringer off, the display shows when the unit is in standby mode. There are eight programmable menus available: Language, Area Code, Tone/Pulse Dialing,Contrast...

EN SET CONTRAS > 1 2 SET ANSWERE > ON OFF Set your phone according to the type of service you are subscribed to. 1. When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to point at SET TONE/PULSE, press flash/pr...

EN 2. Use the CID VOL(+) / CID VOL(-) arrow keys to select ON or OFF. Default is ON. NOTE: When the pointer > is moved to ON, the unit announces ANSWER ON, PRESS REVIEW KEY TO RECEIVE SETUP INSTRUCTIONS. When it points to OFF, the unitannounces ANSWER OFF. 3. Press the flash/program button to sto...

EN DEFAULT SETT YES > NO RINGER SETT HIGH > LOW If you prefer to use the system’s original settings, follow the steps below to return the answeringsystem to the factory default settings. 1. When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arro...

EN NOTE: - As you scroll through the ringer settings, the phone emits the corresponding ringer tone level accordingly. - If you turn the ringer off, the display shows RINGER = OFF when the phone is in standby mode. 3. Press the ringer HI/LO/OFF button to store. If a change is made, you will hear a c...

EN Set your phone according to the type of service you are subscribed to. 1. Press flash/program button until SET TONE/PULSE >TONE PULSE shows in the display. 2. Use the CID VOL(+) / CID VOL(-) arrow keys to select TONE or PULSE. TONE is the default. 3. Press the flash/program button to store (if...

EN 1. Press TALK/CALLBACK button and begin speaking. 2. When finished, press TALK/CALLBACK again to hang up. 1. Press TALK/CALLBACK button, when you hear a dial tone, dial a telephone number. OR Dial the phone number first, then press the TALK/CALLBACK button. 2. When finished, press the TALK/CALLBA...

EN Use the flash/program button to activate custom calling services such as call waiting or calltransfer, which are available through your local phone company. TIP: Don’t use the TALK/CALLBACK button to activate custom calling services such as call waiting, or you’ll hang up the phone. The page/in u...

EN The ringer must be ON for the handset to ring during incoming calls. Refer to the Ringer Setupsection for instructions on turning on the ringer. While talking, press the volume buttons (left and right arrows) to adjust the listening level of thehandset's earpiece. There are four volume levels. Pr...

EN 3. Press and hold the format button on the Spacemaker® until you hear a beep and PRESS AND HOLD BASE PAGE KEY shows in the display. 4. Press and hold the page button on the wall base unit. NOTE: You must press the page button on the wall base unit within 30 seconds to continue registration. 5. Yo...

EN The speaker indicator light is lit when the speakerphone is ON, it flashes when the mute functionis turned on. The charge indicator is lit when the handset is charging in the Charge charge cradle. Press the EXIT button to cancel any command you initiated, except turning the radio OFF. To turn the...

EN While you are talking on the speakerphone, the total talk time is displayed on the center of thebottom line of the display. This section discusses the buttons and features on the answering machine. If you need additional assistance, press the REVIEW (-) arrow key on the Spacemaker® when it isnot ...

EN 4. Follow the voice menu to use the answering machine’s remote functions. The remote feature enables you to perform the following functions: To Press this button Review message 1 Play back messages 2 Stop message play back 2 Erase message 0 (during message playback) Skip message 3 Turn off/on ans...

EN 1. Make sure the phone is OFF (not in TALK mode). 2. Use the CID VOL(+)/CID VOL(-)) button to display the desired Caller ID record. 3. Press delete/channel. The display shows DELETE? 4. Press delete/channel again to erase the record. You will hear a confirmation tone. The display shows DELETED. T...

EN A built in antenna is used for AM reception. The power cord acts as the FM antenna. For best reception, be sure the power cord is stretched to itsfullest length. Do not coil or bunch the cord together. Changing the position of the power cord mayimprove reception. Use the radio on/off button to tu...

EN Memory is available at the handset only. Store up to ten 24-digit numbers in memory for quickdialing. This memory feature is in addition to the 40 Caller ID records that can be stored in theCaller ID memory log. 1. Make sure the phone is OFF (not in TALK mode). 2. Press the mem button. 3. Press t...

EN To replace a number stored in a memory location with a redial number: 1. Repeat steps 1 through 2 in Storing a Redial Number 2. Press the mem button and REPLACE MEMO? shows in the display. 3. Press TONE*/exit to exit, or press the memory button again and the redial number replaces the old number ...

EN Use this feature to make calls which require a sequence of numbers such as using a calling cardfor a frequently called long distance number. Basically, you dial each part of the sequence frommemory. The following example shows how you can use chain dialing to make a call through along distance se...

EN 5. Press CID VOL(+) arrow key to blink the next digit. 6. Continue entering digits for the number of seconds you want to set. NOTE: Maximum timing period is 99 minutes 99 seconds, while one minute equals 60 seconds. When the countdown time is set, 1. Press the timer button to start counting down....

EN BLOCKED CALL The call information is blocked from transmission. BLOCKED NAME The caller’s name is blocked from transmission. REPT Repeat call message. Indicates that a new call from the same number wasreceived more than once. NO DATA No Caller ID information was received. EMPTY Indicates a memory...

EN There are two slots, one on each side of the handset. • Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the ends of the belt clip into place. No Display • Check or replace the handset battery pack. • Make sure the unit is connected to a non-switched electrical ou...

EN Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such asdigital cameras; MP3 players; children’s electronic learning products and games; projection clocks;health and fitness gear; weather stations; and digital and conference phones. The website alsoinclu...

EN This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. Onthe bottom of this equipment is a label that contains, among other information, a product identifier inthe format US:KT5W400BOS6976. If requested, this number must be provided to the telephone compan...

EN 41 NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightningstrikes, are very destructive to telephone equipment connected to AC power sources. To minimizedamage from these types of surges, a surge arrestor is recommended. CAUTION: To maintain compli...

EN The information below is not to be used as contact for support or sales. Please call our customerservice number (listed on our website at www.oregonscientific.com, or on the warranty card for thisproduct) for all inquiries instead. Name: Oregon Scientific, Inc. Address: 19861 SW 95 th Place, Tual...