Oregon Scientific BAR623PA - Manuals

6 EN UNIT LOCATION Main Indoor Temperature Area Remote Outdoor Temperature Area Installing the batteries: GETTING STARTED BATTERIES Main unit 3 x UM-3 (AA) 1.5V batteries Remote unit 2 x UM-4 (AAA) 1.5V batteries Insert batteries before first use, matching the polarity(+ and -) as shown in the batte...

7 EN AC ADAPTOR The main unit is supplied with a 4.5V AC / DC adaptor,which provides continuous clock / temperature projection. Inserting the adaptor: ADJUST SETTINGS To adjust the time, calendar and language settings: 1. Press and hold MODE for 2 seconds to enter setting mode. 2. Press o r to chang...

9 EN For best results: • Insert the batteries and before you mount thesensor. • Place the sensor out of direct sunlight andmoisture. • Do not place the sensor more than 98 feet (30meters) from the main (indoor) unit. • Position the sensor so that it faces the main(indoor) unit, minimizing obstructio...

10 EN To force a manual search for atomic clock signals, pressand hold for 2 seconds. If no signal is found, check the batteries. TURN ATOMIC CLOCK SIGNAL ON / OFF Perform this step if you cannot receive atomic clocksignals. Press and hold for 2 seconds. Then, manually set the clock following the “S...

11 EN SET TIME ZONE / CLOCK / CALENDAR Yo u o n l y n e e d t o d o t h i s i f t h e u n i t i s u n a b l e t osynchronize with the atomic clock broadcast, or if youhave disabled the atomic clock feature (see “Turn AtomicClock Signal ON / OFF” section). To manually set the clock: 1. Press and hold...

12 EN SILENCE ALARM When the alarm time is reached, the crescendo alarmwill sound for 2 minutes. To silence the alarm: • Press SNOOZE to silence it for 8 minutes. OR • Press any key except SNOOZE to mute the alarm and activate it again after 24 hours. If no button is pressed, the alarm will automati...

13 EN MOON PHASE The Calendar must be set for this feature to work, see“Set Clock” section. • Press or to view the moon phase for the next or previous day. • Press and hold or to scan quickly through the years (2001 to 2099). TEMPERATURE T h i s p r o d u c t c a n d i s p l a y c u r r e n t , m i ...

15 EN • Never immerse the product in water. This cancause electrical shock and damage the product. • Do not subject the main unit to extreme force,shock, or fluctuations in temperature or humidity. • Do not tamper with the internal components. • Do not mix new and old batteries or batteries ofdiffer...

16 EN SPECIFICATIONS MAIN UNIT DIMENSIONS L x W x H 3.6 x 6.6 x 2.1 inches(92 x 167 x 53 mm) Weight 8.04 ounces (228 grams)without battery REMOTE SENSOR DIMENSIONS L x W x H 3.6 x 2.4 x 0.9 inches(92 x 60 x 23 mm) Weight 1.6 ounces (46 grams)without battery TEMPERATURE Unit ° C / ° F Indoor range 23...

17 EN Calendar MM / DD; weekday in5 languages (E, D, F, I, S) Alarm Single alarm with2-minute crescendo and8-minute Snooze Projector Outdoor temperatureand time POWER Main unit batteries 3 x UM-3 (AA) 1.5V Sensor batteries 2 x UM-4 (AAA) 1.5V AC / DC adaptor 4.5V with jack NOTE It is recommended tha...

18 EN and on, the user is encouraged to try to correct theinterference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which...

Atomic Projection Clock with Weather ForecastModel: BAR623PA USER MANUAL