Omega IP210 - Manuals

Omega IP210 – Manual in PDF format online.

Manuals:

Manual Omega IP210

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10

Summary

Page 3 - Dimensions in mm; Do not block side vents; IMPORTANT; Recalibration Required

STORING -40ºC +80ºC INSTALLATION 1. Dimensions in mm 114 102 121 102 54 Bleed vent Exhaust vents 2. Requirements Do not block side vents IMPORTANT To conform with the Health and Safety at Work Act 1974 our product should be installed, used and maintained in accordance with: 1 Normal Safety Procedure...

Page 4 - INSTALLATION; Mounting Bracket; Mounting Dimensions

INSTALLATION (continued) 3. Fixing a Mounting Bracket 2 screws b Pipe Mounting Kit (option) (i) Remove screws (ii) Remove bracket (iii) screw in new bracket (iv) clamp to pipe Ø 50mm nominal (v) Tighten nuts 4. Mounting Dimensions

Page 5 - View Looking at Pins of Instrument; Earth; Suitable I/P Converter; Regulator

7. Expose Terminals Cable ø 6 to 8 mm 8. Insert Cable 6. Remove Connector 9. Assemble and Fit Connector a b c d e f 5. Make Pneumatic Connections Soft sealing anaerobic hydraulic seal E.g. Loctite hydraulic seal 512 E.g. 6mm (1/4”) nylon pipe 1/4" NPT OR BSP View Looking at Pins of Instrument 1 ...

Omega Manuals