Omega IP210 - Manual
Omega IP210 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Dimensions in mm; Do not block side vents; IMPORTANT; Recalibration Required
- Page 4 – INSTALLATION; Mounting Bracket; Mounting Dimensions
- Page 5 – View Looking at Pins of Instrument; Earth; Suitable I/P Converter; Regulator
- Page 6 – Air Supply; Note: Reverse Acting Operation
- Page 7 – Parts Breakdown
- Page 8 – Materials of Construction:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STORING -40ºC +80ºC INSTALLATION 1. Dimensions in mm 114 102 121 102 54 Bleed vent Exhaust vents 2. Requirements Do not block side vents IMPORTANT To conform with the Health and Safety at Work Act 1974 our product should be installed, used and maintained in accordance with: 1 Normal Safety Procedure...
INSTALLATION (continued) 3. Fixing a Mounting Bracket 2 screws b Pipe Mounting Kit (option) (i) Remove screws (ii) Remove bracket (iii) screw in new bracket (iv) clamp to pipe Ø 50mm nominal (v) Tighten nuts 4. Mounting Dimensions
7. Expose Terminals Cable ø 6 to 8 mm 8. Insert Cable 6. Remove Connector 9. Assemble and Fit Connector a b c d e f 5. Make Pneumatic Connections Soft sealing anaerobic hydraulic seal E.g. Loctite hydraulic seal 512 E.g. 6mm (1/4”) nylon pipe 1/4" NPT OR BSP View Looking at Pins of Instrument 1 ...
