NEC PlasmaSync 3300 - Manuals

NEC PlasmaSync 3300 – Manual in PDF format online.

Manuals:

Manual

Manual NEC PlasmaSync 3300

Summary

Page 2 - CAUTION; WARNING; DOC compliance Notice; Warnings and Safety Precaution

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET A...

Page 3 - AVERTISSEMENT; ATTENTION; DOC avis de conformation; Mises en garde et précautions de sécurité

MISE EN GARDE: AFIN DE REDUIRE LES RISQUES D’ELECTRO-CUTION, NE PAS DEPOSER LE COUVERCLE, ILN’Y A AUCUNE PIECE UTILISABLE A L’INTERIEURDE CET APPAREIL. NE CONFIER LES TRAVAUXD’ENTRETIEN QU’A UN PERSONNEL QUALIFIE. Ce symbole a pour but de prévenir l’utilisateur de la présenced’une tension dangereuse...

Page 4 - CONTENTS

Introduction ......................................................................................................................... 1 Introduction to the PlasmaSync 3300 ...................................................................................... 1 Feature Highlights ......................

Page 5 - Feature Highlights; Introduction; Introduction to the PlasmaSync 3300; PLUG and PLAY

Feature Highlights The OSM ( On Screen Manager ) controls have made the monitor' s Digital Control System easier to use by providing menus on screen. Pressing thePROCEED key turns on OSM. You' ll find it easy to navigate through themenu that appears, and icons show you how the controls work. IPM ( I...

Page 6 - Part Names and Functions; Front View

1 POWER .............................. Press to power the monitor on and off. 2 STANDBY /POWER ............ Lights green during normal operation. Lights orange when the monitor is in standby mode. 3 Remote Sensor Window ........ Receives infrared signal from the remote control unit. 4 EXIT ............

Page 7 - Terminal Board; EXTERNAL CONTROL; DIP Switches; VIDEO 1

Terminal Board 5 6 0 EXTERNAL CONTROL EXTERNAL CONTROL IN (mini D-SUB 15 PIN)..... This terminal is used when power ON/OFF, input selection, AUDIO MUTE and PICTURE MUTE are operated externally (by external control). See also page 41 for external con- trol port pin assignments. NOTE: Select EXT. CONT...

Page 10 - Remote Control Unit; Raster Control

Remote Control Unit 1 POWER ON/OFF ................ Press POWER ON to turn the monitor on when the STANDBY/POWER indicator is lit orange. Press POWER OFF to turn the monitor off and the monitor will go into the standby condi- tion. 2 VIDEO 1 .............................. Press to select reception o...

Page 11 - Visual Control

F D MULTIMEDIA MONITOR RD-336E ON OFF ON POWER OFF DEGAUSS VIDEO1VIDEO2 RGB1 RGB2 WIDTH HEIGHT SIDE PIN SCAN SELECT POSITION/CONTROL NORMAL RASTER CONTROL RGB/VIDEO VIDEO CONTRAST BRIGHT COLOR TINT SHARPNESS NORMAL VISUAL CONTROL VOLUME MUTE EXIT PROCEED ON SCREEN 9 0 B A C E G I H 8 13 14 Visual Co...

Page 13 - Functions of DIP SW; Functions and Settings of DIP SW 1

No.4 No.5 No.6 No.7 No.8 Pin numbers 4 and 6 are not used. Set the six pins to the OFF position except Nos. 5 and 8 pin during normal operation. Pins No. 1, 2 and 3 (POWER ON MODE SET) Sets the monitor to default to any one of its inputs each time the monitor is turned on. See table on the above. Th...

Page 14 - Functions and Settings of DIP SW 2

ON: Auto selection for video standardOFF: Manual selection for video standard ON: Manually selecting PALOFF: Manually selecting NTSCON: Manually selecting SECAMOFF: Manually selecting other ON: Manually selecting 4.43 NTSCOFF: Manually selecting other Not Used ON : Intelligent Power Manager ONOFF : ...

Page 15 - Installation; External Component Connections

Installation External Component Connections The NEC PlasmaSync 3300 multimedia monitor is designed for convenient installation with a wide variety of audio, the latest video components and many data processing devices equipped with analog RGB output. BNC jack terminals (VIDEO 1 and VIDEO 2) are prov...

Page 17 - Typical Connection Example; EXTERNAL; IBM PC OR COMPATIBLES; RGB equipment; •PlasmaSync 3300 does not support PAL/SECAM on a scan

Typical Connection Example EXTERNAL CONTROL T o m i n i D - S U B 1 5 Pin input To EXTERNAL CONTROL(mini D-SUB 15 Pin input) PlasmaSync 3300 25 26 To VIDEO IN R, L, inputs CAMERA, VIDEO COPYSTAND ORMULTIMEDIA APPLICATION IBM PC OR COMPATIBLES PlasmaSync 3300 NEC MULTISYNC OR PC-COMPATIBLE MONITOR RG...

Page 18 - External Speaker Connections

External Speaker Connections External speakers may be connected to the monitor to reproduce sound from VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources. External speakers may be connected directly to the EXTERNAL SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio ou...

Page 19 - Video Signal, Picture Adjustments

Controls/Adjustments Power 1. Plug in the power cord to an electrical outlet to connect power. 2. Press POWER to turn the monitor on. 3. Press POWER again to turn the monitor off. Press the POWER OFF key on the remote control unit to turn the monitor off when the monitor is turned on. The monitor wi...

Page 20 - Volume Control; RGB Signal, Picture Adjustments; OSM; Controls

S i z e C o n t r o l { | W i d t h S i z e C o n t r o l { | H e i g h t P o s i t i o n C o n t r o l { | L e f t / R i g h t P o s i t i o n C o n t r o l { | D o w n / U p S i d e P i n C o n t r o l { | I n / O u t S c a n S e l e c t O v e r S c a nU n d e r S c a n V i s u a l C o n t r o l C...

Page 21 - Gain

Accessing OSM Press the PROCEED key. Turning off OSM Press the EXIT key when in the main menu ; press the EXIT key twice when in submenus. OSM Menus Main Menu On-Screen Manager' s main menu of Controls gives you an overview of the selection of controls available. The arrow in the bottom or upper rig...

Page 23 - RGB

Position Controls The Position controls allow you to adjust the position of the image. 38 37 Position Down/Up : moves the image vertically up or down. Position Left/Right : moves the image horizontally left or right. POSITION/CONTROL Up/Down : moves the arrow up or down to select one of the choices....

Page 25 - External Control Function; External Control Port Pin Assignments

NOTE: “GND” means to connect with pin 9. NOTE: If EXT. Control is set to ON, the exter control will be effective only for the above functions. If EXT. Control is set to OFF, PC CTL will be effective. External Control Function External Control Port Pin Assignments Pin No. 1-3 4, 5 6-8 9 10 11-14 15 N...

Page 26 - Signal Identification Flowchart; Input signal

44 43 Signal Identification Flowchart Input signal 28 kHz<fH<34 kHz fV<65 Hz 640 x 480@60 Hz (VESA, VGA) 34 kHz<fH<36.5 kHz fV<65 Hz 800 x [email protected] Hz (VESA) 36.5 kHz<fH<38.6 kHz fV<65 Hz 800 x [email protected] Hz (VESA) 38.6 kHz<fH<42 kHz 640 x 480@75 Hz (XGA-2) 65 Hz<fV...

Page 27 - Troubleshooting

Troubleshooting 45 46 Before arranging for service by the NEC Service Center, check the following to be sure repairs are needed. Problem No Picture or Sound Sound OK; poor picture with VIDEO signal input. Sound OK; poor picture with RGB signal input. Picture OK; poor or no sound. Poor sound from ext...

Page 28 - Specifications

Specifications Plasma Screen 33 inch Visual size (Diagonal), AC Drive typePhosphor stripe trios Ph 1.05 mm, Pv 1.05 mmMedium-short persistence phosphorOptical filter coatingAspect ratio: 3 : 4Display color: 260,000 colors (RGB 64 shades of gray respectively) RGB Input Terminals RGB: D-SUB 15pin BNC ...

Page 30 - Dimensions

Page 31 - Limited Warranty

HOW YOU CAN GET WARRANTY SERVICE To obtain service on your product, consult the dealer from whom you pur- chased the product, or ship it prepaid to any authorized NECTECH service cen- ter. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of war...