NEC FE1250+ - Manuals

English-4 TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choicehas provided you with a product developed forprofessional use. Your purchase has also contributedto reducing the burden on the environment and alsoto the further development of environmentally...

English-5 English The environmental demands impose restrictions on the presence anduse of heavy metals, brominated and chlorinated flame retardants,CFCs (freons) and chlorinated solvents, among other things. Theproduct must be prepared for recycling and the manufacturer is obligedto have an environm...

English-7 English Contents Your new MultiSync FE1250+ monitor box* should contain the following: • MultiSync FE1250+ Monitor with tilt/swivel base • Power cord • Captive Signal Cable • User’s Manual • CD-ROM:Includes complete User’s Manual in PDF format and Windows relatedfiles (Inf file and color p...

English-8 Quick Start To attach the MultiSync FE1250+ monitor to your system, follow theseinstructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D...

English-10 Controls OSM (On-Screen Manager) control buttons on the front of the monitorfunction as follows: NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the resetfunction. When OSM controls are activated, icons are displayed at the top of ...

English-11 English Size and Position Controls Left/Right: Moves the image horizontally (left or right). Down/Up: Moves the image vertically (up or down). Narrow/Wide: Decreases or increases the horizontal size of the image. Short/Tall: Decreases or increases the vertical size of the image. Color Con...

English-13 English Auto Save: The monitor automatically saves the last settings of the user controls. You can turn this Auto Save feature off by selecting this menuand changing the off position. When the off mode is selected, you willprompted with the option to save or return to the previous setting...

English-14 Information Display Mode: Indicates the current mode and frequency setting of the monitor. Monitor Info : Indicates the model and serial numbers of your monitor. Refresh Notifier: A message will advise you if the refresh rate of the signal being applied to the monitor by the computer is t...

English-15 English Recommended use Safety Precautions and Maintenance: FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC FE1250+ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable par ts inside and opening or removing covers may expose yo...

English-16 • Allow adequate ventilation around the monitor so that heat canproperly dissipate. Do not block ventilated openings or place themonitor near a radiator or other heat sources. Do not putanything on top of monitor. • The power cable connector is the primary means of detachingthe system fro...

English-17 English Unlimited number of Colours 30 kHz to 110 kHz50 Hz to 160 Hz 640 x 480 @ 60 to 160 Hz800 x 600 @ 55 to 160 Hz832 x 624 @ 55 to 160 Hz1024 x768 @ 55 to 136 Hz1152 x 870 @ 55 to 120 Hz1280 x 1024 @ 55 to 102 Hz1600 x 1200 @ 55 to 88 Hz.....1792 x 1344 @ 55 to 78 Hz1800 x 1440 @ 55 t...

English-18 Features Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare sothat what you see on-screen is what you get on your printed output. Thestriped phosphor alignment of the CRT delivers superior verticalde...

English-19 English Reduced Magnetic Field Technology: Reduces magnetic and alternating electric field emissions and static electricity, addressingergonomic concerns regarding potential risks from extended computermonitor use. Multiple Frequency Technology: Automatically adjusts monitor to the displa...

English-20 Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ONposition. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling...

English-21 English Display image is not centered, too small, or too large • Use the OSM Size and Position Controls to adjust the image. Thin horizontal lines appear on your screen • Thin horizontal lines are normal for an aperture grille CRT and arenot a malfunction. These are shadows from the dampe...